| View previous topic :: View next topic |
| Author |
Message |
Draekon
n00b
Joined: 20 Feb 2005
Posts: 13
|
 Posted: Tue Jun 28, 2005 1:56 am Post subject: Direct Rendering not working with ATI Radeon 9200 |
 |
|
So I have an ATI Radeon 9200, running kernel 2.6.11
I have tried everything I could find, but it still wont work. I followed http://gentoo-wiki.com/HOWTO_ATI_Drivers but that didnt work either.
Help please. |
|
| Back to top |
|
 |
Specialized
Apprentice
Joined: 11 Jan 2005
Posts: 264
|
| Posted: Tue Jun 28, 2005 11:48 am Post subject: |
|
|
| I think we need a bit more information f.e. your xorg.conf and your Xorg.log. |
|
| Back to top |
|
|
Draekon
n00b
Joined: 20 Feb 2005
Posts: 13
|
| Posted: Tue Jun 28, 2005 10:05 pm Post subject: |
|
|
Sry for the lack of info before...
xorg.conf
| Code: | # **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 30-70
VertRefresh 50-160
Option "DPMS
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "2"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=5961
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection |
Xorg.0.log
| Code: | (**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removi
ng from list!
SetClientVersion: 0 8
SetKbdSettings - type: -1 rate: 30 delay: 500 snumlk: 0
(II) 3rd Button detected: disabling emulate3Button |
dmesg
| Code: | Linux version 2.6.11-gentoo-r11 (root@localhost) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #1 SMP Mon Jun 27 15:02:05 PDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131068
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126972 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ASUS P4B266 detected: force use of acpi=ht
ACPI: RSDP (v000 ASUS ) @ 0x000f8cd0
ACPI: RSDT (v001 ASUS P4B266LA 0x42302e31 MSFT 0x31313031) @ 0x1fffc000
ACPI: FADT (v001 ASUS P4B266LA 0x42302e31 MSFT 0x31313031) @ 0x1fffc100
ACPI: BOOT (v001 ASUS P4B266LA 0x42302e31 MSFT 0x31313031) @ 0x1fffc040
ACPI: MADT (v001 ASUS P4B266LA 0x42302e31 MSFT 0x31313031) @ 0x1fffc080
ACPI: DSDT (v001 ASUS P4B266LA 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/ram0 ramdisk=8192 real_root=/dev/hda4
__iounmap: bad address c00fffd9
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1793.498 MHz processor.
Using tsc for high-res timesource
Speakup v-2.00 CVS: Wed Mar 2 20:22:02 EST 2005 : initialized
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513212k/524272k available (2489k kernel code, 10420k reserved, 663k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3530.75 BogoMIPS (lpj=1765376)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Couldn't initialize miscdevice /dev/synth.
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02
per-CPU timeslice cutoff: 731.43 usecs.
task migration cache decay timeout: 1 msecs.
Total of 1 processors activated (3530.75 BogoMIPS).
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 01
groups: 01
domain 1: span 01
groups: 01
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1626k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf1060, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fcb60
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xcb90, dseg 0xf0000
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Enabled i801 SMBus device
PCI: Transparent bridge - 0000:00:1e.0
PCI: Using IRQ router PIIX/ICH [8086/2440] at 0000:00:1f.0
PCI: IRQ 0 for device 0000:00:1f.3 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:00:1f.5 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:02:08.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:02:09.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: IRQ 0 for device 0000:02:0b.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 9 for device 0000:02:0b.0
PCI: Sharing IRQ 9 with 0000:00:1f.4
pnp: 00:13: ioport range 0x290-0x297 has been reserved
pnp: 00:13: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:13: ioport range 0xe400-0xe47f has been reserved
pnp: 00:13: ioport range 0xec00-0xec3f has been reserved
Simple Boot Flag at 0x3a set to 0x1
inotify device minor=63
Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
Linux agpgart interface v0.100 (c) Dave Jones
PCI: Found IRQ 11 for device 0000:01:00.0
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.00 MHz
radeonfb: PLL min 20000 max 40000
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
Console: switching to colour frame buffer device 90x25
radeonfb (0000:01:00.0): ATI Radeon Ya
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HP CD-Writer cd16b, ATAPI CD/DVD-ROM drive
hdd: HL-DT-STDVD-ROM GDR8160B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
CAPI Subsystem Rev 1.1.2.8
EISA: Probing bus 0 at eisa0
EISA: Detected 0 cards.
Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC).
PCI: Enabling device 0000:00:1f.5 (0004 -> 0005)
PCI: IRQ 0 for device 0000:00:1f.5 doesn't match PIRQ mask - try pci=usepirqmask
PCI: setting IRQ 11 as level-triggered
PCI: Assigned IRQ 11 for device 0000:00:1f.5
PCI: Sharing IRQ 11 with 0000:00:1f.3
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50906 usecs
intel8x0: clocking to 48000
ALSA device list:
#0: Intel 82801BA-ICH2 with AD1885 at 0x9800, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 204k freed
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.2
PCI: Found IRQ 9 for device 0000:00:1f.2
uhci_hcd 0000:00:1f.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: irq 9, io base 0xa400
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 9 for device 0000:00:1f.4
PCI: Sharing IRQ 9 with 0000:02:0b.0
uhci_hcd 0000:00:1f.4: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: irq 9, io base 0xa000
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ieee1394: Initialized config rom entry `ip1394'
usb 2-1: new full speed USB device using uhci_hcd and address 2
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:02:09.0 (0014 -> 0016)
PCI: IRQ 0 for device 0000:02:08.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Assigned IRQ 11 for device 0000:02:08.0
e100: eth1: e100_probe: addr 0xde800000, irq 11, MAC addr 00:E0:18:58:06:E2
usbcore: registered new driver wacom
drivers/usb/input/wacom.c: v1.30:USB Wacom Graphire and Wacom Intuos tablet driver
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
PCI: Found IRQ 11 for device 0000:01:00.0
[fglrx] module loaded - fglrx 8.12.10 [Apr 4 2005] on minor 0
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP]
Real Time Clock Driver v1.12
devfs_mk_dev: could not append to parent for vcc/9
devfs_mk_dev: could not append to parent for vcc/1
devfs_mk_dev: could not append to parent for vcc/a1
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 8663 using kernel context 0
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03fdc00(lo)
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root |
If you need me to post something else, let me know, I'm still new to linux. |
|
| Back to top |
|
|
djkork
n00b
Joined: 25 May 2004
Posts: 45
Location: Madrid
|
| Posted: Sun Jul 03, 2005 7:54 pm Post subject: |
|
|
for radeon 9200 i reccommend you to use the xorg radeon driver rather than propietary ati driver fglrx due fglrx driver have a lot of bugs:
-- DVI connection doesn't work
-- Memory leak on loading textures eats all your memory after a while (<=8.12.10) (making impossible playing games with a lot of textures like nwn)
-- Doesn't compile vs kernel 2.6.12 (8.14.13-r1 compiles but doesn't work)
-- Changing to console and returning to X corrupts your screen (if you are running an opengl game)
-- Opening a second X server hangs your computer
and performance is very simmilar, i have been testing all ati drivers on my computer (radeon 9200) for a year and here are the numbers
| Quote: |
Driver------fgl_glxgears-----Glx gears----Atunnel------GLPLANET
8.8.25-------293,8-----------1510,2--------41,76--------39,5
8.10.19-----340,4------------2035,6--------43,7---------41,1
Xorg 6.8.0--------------------1512----------47,4---------37,34
Xorg 6.8.2-------------------2121,6---------47,4---------37,44
8.12.10-----354,2-----------2012,2---------43,7----------40.1
|
i've not tested 8.14.13-r1 because it doesn't compile with my actual kernel 2.6.12
as you can see performance is very similar comparing Xorg 6.8.2 radeon driver with fglrx 8.12.10 driver and the radeon driver have less bugs than fglrx have.... here they are:
-- Changing to console and returning to X corrupts your screen (if you are running an opengl game)
-- While playing Opengl games screen becomes black sometimes when using DVI connector
As you can see there are less bugs and they are less important....
If you want to install kernel/Xorg radeon driver you have to:
1) Compile your kernel with agpgart support for your chipset:
| Code: | CONFIG_AGP=m
CONFIG_AGP_INTEL_MCH=m |
in this example i have configured it as a module and my chipset is Intel I865
you have add DRM support and the RADEON driver to your kernel
| Code: | CONFIG_DRM=m
CONFIG_DRM_RADEON=m |
2) change the xorg.conf to use the radeon driver. here is relevant parts of my my xorg.conf
| Code: | # This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
Section "Device"
Identifier "radeon9200"
Driver "radeon"
Option "AGPMode" "4"
Option "EnablePageFlip" "true"
EndSection
Section "DRI"
Mode 0666
EndSection
|
AGPMode is 4 becase nowadays agp 8 is not supported (we have to wait for xorg 6.9)
"EnablePageFlip" "true" makes things faster
never use AGPFastWrite option with actual radeon driver version and 9200 because it hangs your computer
More complex options can be selected using xorgconfig or reading the man page of radeon.
3) change your opengl version to xorg-x11
| Code: | | opengl-update xorg-x11 |
4) restart your computer with your new kernel and test it.
But if you want to use the buggy flrx driver then:
--as you have the Option "UseInternalAGPGART" "no" option in your xorg.conf file, verify that you have compiled agpgart support in your kernel (for your specific chipset) and that if you have configured it as a module, that it is loaded
--verify that you have executed opengl-update xorg-x11
--in your xorg.conf file you don't have the dri section, so you haven't permissions to use dri unless you are root. add dri section to add permissions.
| Code: | Section "DRI"
Mode 0666
EndSection |
-- And don't forget to add yourself to the Video group:P
--post your /var/log/Xorg.0.log so we can see what's failing when you start X (the piece of the file that you have posted is too small and it isn't graphics driver related so we can't see anything there)
Good luck.....
_________________
ICQ#191780333
Boom boom the bass - Dj Pirata
Representative - Control
Feel it Magdalena Magic - Dj Puig
Schlechter junge - Dj kork |
|
| Back to top |
|
|
Draekon
n00b
Joined: 20 Feb 2005
Posts: 13
|
| Posted: Tue Jul 05, 2005 11:44 pm Post subject: |
|
|
| What part of /var/log/Xorg.0.log should i post? its too long to post the whole thing in one post... |
|
| Back to top |
|
|
Specialized
Apprentice
Joined: 11 Jan 2005
Posts: 264
|
| Posted: Wed Jul 06, 2005 2:14 pm Post subject: |
|
|
| These parts with (EE) or (WW) if there are any. If not, just these with fglrx, agp, dri, drm ... |
|
| Back to top |
|
|
Draekon
n00b
Joined: 20 Feb 2005
Posts: 13
|
| Posted: Wed Jul 06, 2005 11:21 pm Post subject: |
|
|
| Code: | (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENOMEM"
(EE) fglrx(0): cannot init AGP
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* * |
|
|
| Back to top |
|
|
Specialized
Apprentice
Joined: 11 Jan 2005
Posts: 264
|
| Posted: Thu Jul 07, 2005 4:19 pm Post subject: |
|
|
Try adding this
| Code: | | Option "KernelModuleParm" "agplock=0" |
in your xorg-ati-Device-Section (fglrx). |
|
| Back to top |
|
|
Draekon
n00b
Joined: 20 Feb 2005
Posts: 13
|
| Posted: Sun Jul 17, 2005 8:11 pm Post subject: |
|
|
Sorry for the delay in the response, my friend was trying to help me get it working, still no luck, but now the error I get is:
| Code: | (EE) RADEON(0): [dri] RADEONDRIScreenInit failed because of a version mismatch.
[dri] libdri version is 4.1.0 but version 5.0.x is needed.
[dri] Disabling DRI. |
|
|
| Back to top |
|
|
Specialized
Apprentice
Joined: 11 Jan 2005
Posts: 264
|
| Posted: Sun Jul 17, 2005 8:51 pm Post subject: |
|
|
Wich version of Xorg-x11 are you using?
6.8.99 has dri 5.0 support, but ati-drivers don't support it yet. |
|
| Back to top |
|
|
Draekon
n00b
Joined: 20 Feb 2005
Posts: 13
|
| Posted: Sun Jul 17, 2005 10:54 pm Post subject: |
|
|
| I believe I'm currently using xorg-x11 6.8.2-r1 |
|
| Back to top |
|
|
Specialized
Apprentice
Joined: 11 Jan 2005
Posts: 264
|
| Posted: Tue Jul 19, 2005 9:07 am Post subject: |
|
|
| You can try to reemerge xorg-x11 and ati-drivers with USE="opengl" and the line VIDEO_CARDS="radeon" in your make.conf. |
|
| Back to top |
|
|
Draekon
n00b
Joined: 20 Feb 2005
Posts: 13
|
| Posted: Tue Jul 19, 2005 8:54 pm Post subject: |
|
|
I managed to get x11-drm-20050502 and then recompiled xorg-x11, I no longer get the version mismatch error, but instead I get:
| Code: | (WW) RADEON(0): [agp] AGP not available
(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI. |
|
|
| Back to top |
|
|
Specialized
Apprentice
Joined: 11 Jan 2005
Posts: 264
|
| Posted: Wed Jul 20, 2005 8:38 pm Post subject: |
|
|
Maybe you can selected the Ati-radeon drm in the Kernel or switch this line in the xorg.conf:
| Code: | | Option "UseInternalAGPGART" "yes" |
|
|
| Back to top |
|
|
jserink
Veteran
Joined: 30 Jan 2004
Posts: 1019
|
| Posted: Thu Jul 21, 2005 2:29 am Post subject: ATI 9200 Mobility working PERFECTLY Xorg 6.8.2 r2 |
|
|
Hi All:
before enabling DRI glxgears=152fps
After enableing DRI glxgears=1936fps
Adding tweaks:
Option "AGPMode" "4"
Option "EnablePageFlip" "true" glxgears=2490fps
Cheers,
John |
|
| Back to top |
|
|
Specialized
Apprentice
Joined: 11 Jan 2005
Posts: 264
|
| Posted: Thu Jul 21, 2005 2:03 pm Post subject: |
|
|
As the open-source drivers seems to work very good, I would recommend you to switch to the radeon-driver.
The Performance seems to be the same, there is less troubleshooting and I think there will also be less Problems at Hibernation.
Apart from that I think as a Linux user one should use opensource software and drivers if there is no lack of Performance and the ATI-Drivers are closed-source.
But that's my personal Opinion. |
|
| Back to top |
|
|
xcham
Tux's lil' helper
Joined: 30 Jul 2003
Posts: 146
Location: Toronto, ON, Canada
|
| Posted: Mon Aug 01, 2005 2:21 am Post subject: |
|
|
Hey folks, I'm trying to get my Radeon 9200 working in xorg as well, hoping you folks could help me out. I want to use the opensource ones as well as I've had very good experiences with them and NOT so good experiences with fglrx.
xorg.conf:
| Code: | Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# For XFS, uncomment this and comment the others
# FontPath "unix/:-1"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/share/fonts/myfonts/"
FontPath "/usr/share/fonts/oldwinfonts/"
# ModulePath can be used to set a search path for the X server modules.
# The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Module section -- this is an optional section which is used to specify
# which run-time loadable modules to load when the X server starts up.
# **********************************************************************
Section "Module"
# This loads the DBE extension module.
Load "dbe"
Load "glx"
Load "dri"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
# Option "omit xfree86-dga"
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
EndSection
# **********************************************************************
# Server flags section. This contains various server-wide Options.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "DontZoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
# Set the basic blanking screen saver timeout.
Option "blank time" "10" # 10 minutes
# Set the DPMS timeouts. These are set here because they are global
# rather than screen-specific. These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.
Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"
# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.
# Option "EstimateSizesAggresively" "0"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris), comment
# out the above line, and uncomment the following line.
# Option "Protocol" "Xqueue"
# Set the keyboard auto repeat parameters. Not all platforms implement
# this.
Option "AutoRepeat" "500 30"
# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a European
# keyboard, you will probably want to use one of:
#
# Option "XkbModel" "pc102"
# Option "XkbModel" "pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
# Option "XkbModel" "microsoft"
#
# If you have a US "windows" keyboard you will want:
#
# Option "XkbModel" "pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
# Option "XkbLayout" "de"
#
# or:
#
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for xorg
#
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Logitech Cordless Desktop Pro"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "logiinkse"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
# The mouse protocol and device. The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.
Option "Protocol" "imps/2"
Option "Device" "/dev/psaux"
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
# Option "Protocol" "Auto"
# When using mouse connected to a PS/2 port (aka "MousePort"), set the
# the protocol as follows. On some platforms some other settings may
# be available.
# Option "Protocol" "PS/2"
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris), use
# the following instead of any of the lines above. The Device line
# is not required in this case.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some older Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice, or any
# 3-button mouse where the middle button generates left+right button
# events.
# Option "ChordMiddle"
Option "ZAxisMapping" "4 5"
EndSection
#Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
#EndSection
# Some examples of extended input devices
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
# The identifier line must be present.
Identifier "Generic Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 31.5 # typical for a single frequency fixed-sync monitor
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
HorizSync 30-82
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# VertRefresh 60 # typical for a single frequency fixed-sync monitor
# VertRefresh 50-100 # multisync
# VertRefresh 60, 65 # multiple fixed sync frequencies
# VertRefresh 40-50, 80-100 # multiple ranges of sync frequencies
VertRefresh 48-150
# Modes can be specified in two formats. A compact one-line format, or
# a multi-line format.
# A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz)
# These two are equivalent
# ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525
# Mode "640x480"
# DotClock 25.175
# HTimings 640 664 760 800
# VTimings 480 491 493 525
# EndMode
# These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
# Mode "1024x768i"
# DotClock 45
# HTimings 1024 1048 1208 1264
# VTimings 768 776 784 817
# Flags "Interlace"
# EndMode
# If a monitor has DPMS support, that can be indicated here. This will
# enable DPMS when the monitor is used with drivers that support it.
# Option "dpms"
# If a monitor requires that the sync signals be superimposed on the
# green signal, the following option will enable this when used with
# drivers that support it. Only a relatively small range of hardware
# (and drivers) actually support this.
# Option "sync on green"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
# The Identifier must be present.
Identifier "RadeonDriver"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "radeon"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Various other lines can be specified to override the driver's automatic
# detection code. In most cases they are not needed.
Option "BusType" "AGP"
Option "AGPMode" "4"
# ChipId 0x5961
# VideoRam 256
# Clocks 25.2 28.3
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# Various option lines can be added here as required. Some options
# are more appropriate in Screen sections, Display subsections or even
# Monitor sections.
# Option "hw cursor" "off"
EndSection
# **********************************************************************
# Screen sections.
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
# The Identifier, Device and Monitor lines must be present
Identifier "Screen 1"
Device "RadeonDriver"
Monitor "Generic Monitor"
# The favoured Depth and/or Bpp may be specified here
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Main Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents". In this example, "Mouse1" is the core pointer,
# and "Mouse2" is an extended input device that also generates core
# pointer events (i.e., both mice will move the standard pointer).
InputDevice "Mouse1" "CorePointer"
# InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Logitech Cordless Desktop Pro" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0777
EndSection
|
Xorg.0.log (relevant bit):
| Code: | (II) RADEON(0): Page flipping disabled
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xff8f0000 - 0xff8fffff (0x10000) MX[B]
[1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xff9fe000 - 0xff9fefff (0x1000) MX[B]
[8] -1 0 0xff9f8000 - 0xff9fbfff (0x4000) MX[B]
[9] -1 0 0xff9ff000 - 0xff9ff7ff (0x800) MX[B]
[10] -1 0 0xff9ffc00 - 0xff9fffff (0x400) MX[B]
[11] -1 0 0xeeaff000 - 0xeeafffff (0x1000) MX[B]
[12] -1 0 0x40000000 - 0x400003ff (0x400) MX[B]
[13] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
[14] -1 0 0xf0000000 - 0xefffffff (0x0) MX[B]O
[15] -1 0 0xeeafe000 - 0xeeafefff (0x1000) MX[B](B)
[16] -1 0 0xff8e0000 - 0xff8effff (0x10000) MX[B](B)
[17] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[18] -1 0 0xff8c0000 - 0xff8dffff (0x20000) MX[B](B)
[19] -1 0 0xff8f0000 - 0xff8fffff (0x10000) MX[B](B)
[20] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[24] 0 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[27] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[28] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B]
[29] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[30] -1 0 0x0000c800 - 0x0000c81f (0x20) IX[B]
[31] -1 0 0x0000dc00 - 0x0000dc0f (0x10) IX[B]
[32] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[33] -1 0 0x0000e400 - 0x0000e407 (0x8) IX[B]
[34] -1 0 0x0000e800 - 0x0000e803 (0x4) IX[B]
[35] -1 0 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[36] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[37] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[38] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[39] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B]
[40] -1 0 0x0000cc00 - 0x0000cc1f (0x20) IX[B]
[41] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[43] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) RADEON(0): Write-combining range (0xe0000000,0x8000000)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf8dd8000
(II) RADEON(0): [drm] mapped SAREA 0xf8dd8000 to 0xafc59000
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(WW) RADEON(0): [agp] AGP not available
(EE) RADEON(0): [agp] AGP failed to initialize. Disabling the DRI.
(II) RADEON(0): [agp] You may want to make sure the agpgart kernel module
is loaded before the radeon kernel module.
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8dd8000 at 0xafc59000
(II) RADEON(0): Memory manager initialized to (0,0) (1600,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1600,1202)
(II) RADEON(0): Largest offscreen area available: 1600 x 6989
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1202)
(II) RADEON(0): Largest offscreen area available: 1600 x 6983
(II) RADEON(0): Direct rendering disabled
|
lspci output for the card:
| Code: |
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)
0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (Secondary) (rev 01)
|
glxinfo:
| Code: | name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_SGIS_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs,
GL_EXT_stencil_two_side, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object,
GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection,
GL_NV_texture_rectangle, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow,
GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x24 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None
0x25 16 tc 0 24 0 r y . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x26 16 tc 0 24 0 r . . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x27 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x28 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 None
0x29 16 dc 0 24 0 r y . 5 6 5 8 0 16 8 16 16 16 16 0 0 None
0x2a 16 dc 0 24 0 r . . 5 6 5 8 0 16 8 16 16 16 16 0 0 None |
Some dmesg fun:
| Code: | [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_unlock] *ERROR* Process 4525 using kernel context 0
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held
[drm:drm_unlock] *ERROR* Process 6558 using kernel context 0 |
And finally, lsmod
| Code: | Module Size Used by
snd_pcm_oss 49440 0
snd_pcm 84740 1 snd_pcm_oss
snd_timer 22404 1 snd_pcm
snd_page_alloc 8708 1 snd_pcm
snd_mixer_oss 18432 1 snd_pcm_oss
snd 46948 4 snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
radeon 77696 0
drm 62356 1 radeon
ipv6 250048 10
agpgart 31056 1 drm
pwc 88948 0
emu10k1 73348 1
ac97_codec 19340 1 emu10k1
|
As you can see, agpgart is loaded, I have it enabled in my kernel (I also have an Intel 865PERL board) DRM and radeon models built and running, but for some reason AGP isn't available. I have the permissions on /dev/misc/agpgart set to 0666 so that shouldn't be a problem, same for /dev/dri/card0.
Does anyone have any idea why I can't get DRI working? Oh yeah, kernel 2.6.12-gentoo-r6. |
|
| Back to top |
|
|
xcham
Tux's lil' helper
Joined: 30 Jul 2003
Posts: 146
Location: Toronto, ON, Canada
|
| Posted: Mon Aug 01, 2005 2:49 am Post subject: |
|
|
Uh, wonderful. Apparently i865 support is in 2.6.11.11, but not 2.6.12-gentoo-r6. What in the hell.
UPDATE: Compiling 2.6.11.11 vanilla with i865 support didn't help either. Anyone have ideas? |
|
| Back to top |
|
|
xcham
Tux's lil' helper
Joined: 30 Jul 2003
Posts: 146
Location: Toronto, ON, Canada
|
| Posted: Mon Aug 01, 2005 5:41 am Post subject: |
|
|
| Solved. Okay, I picked up from this thread that someone was loading a specific module for their AGP chipset... nobody told me you had to do this, in fact the menuconfig doesn't even list a module name! but I put intel_mch_agp into my /etc/modules.autoload/kernel-2.6 file and it works beautifully. Get decent framerates at 1024x768 in UT2k4Demo. Original UT is beautiful, as is tuxracer. |
|
| Back to top |
|
|
Hadriel
Tux's lil' helper
Joined: 28 Jul 2005
Posts: 75
|
| Posted: Thu Jan 26, 2006 12:25 pm Post subject: |
|
|
@djkork
just wanted to thank you for your little xorg radeon driver tutorial. the original fglrx worked until i logged off gnome/x11. my notebook just freezed. with the open source drivers, i have better performance AND gnome doesnt freeze anymore  |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
