Probleme mit emerge sync

[Hotstuff]

Hallo

Ich will mein Gentoo neu installieren. Ich bin zu den Schritt emerge -sync gekommen ausgeführt hat es angefangen das zu downloaden plötzlich macht es nicht mehr weiter. Dann habe ich es abgeprochen.


Und jetzt kommt immer dieser Fehler wenn ich das eingebe emerge --sync

Code:

emerge --sync >>> starting rsync with rsync://64.127.121.98/gentoo-portage... >>> checking server timestamp ... Welcome to owl.gentoo.org Server Address : 64.127.121.98 Contact Name   : mirror-admin@gentoo.org Hardware       : 4 x Intel(R) Xeon(TM) CPU 2.40GHz, 1024MB RAM Please note: common gentoo-netiquette says you should not sync more than once a day.  Users who abuse the rsync.gentoo.org rotation may be added to a temporary ban list. MOTD brought to you by motd-o-matic, version 0.3 receiving file list ... 1 file to consider mkstemp "/var/tmp/.timestamp.chk.PgSAof" failed: Read-only file system           32 100%    0.00kB/s    0:00:00 Number of files: 1 Number of files transferred: 1 Total file size: 32 bytes Total transferred file size: 32 bytes Literal data: 32 bytes Matched data: 0 bytes File list size: 32 Total bytes written: 223 Total bytes read: 537 wrote 223 bytes  read 537 bytes  304.00 bytes/sec total size is 32  speedup is 0.04 rsync error: some files could not be transferred (code 23) at main.c(1064) >>> retry ... >>> Starting retry 1 of 3 with rsync://140.211.166.165/gentoo-portage >>> checking server timestamp ... Welcome to raptor.gentoo.org Server Address : 140.211.166.165 Contact Name   : mirror-admin@gentoo.org Hardware       : 2 x Pentium III (Katmai), 2432MB RAM Please note: common gentoo-netiquette says you should not sync more than once a day.  Users who abuse the rsync.gentoo.org rotation may be added to a temporary ban list. MOTD brought to you by motd-o-matic, version 0.3 receiving file list ... 1 file to consider mkstemp "/var/tmp/.timestamp.chk.udFfEA" failed: Read-only file system           32 100%    0.00kB/s    0:00:00 Number of files: 1 Number of files transferred: 1 Total file size: 32 bytes Total transferred file size: 32 bytes Literal data: 32 bytes Matched data: 0 bytes File list size: 32 Total bytes written: 223 Total bytes read: 533 wrote 223 bytes  read 533 bytes  302.40 bytes/sec total size is 32  speedup is 0.04 rsync error: some files could not be transferred (code 23) at main.c(1064) >>> retry ... >>> Starting retry 2 of 3 with rsync://134.68.220.97/gentoo-portage >>> checking server timestamp ... Welcome to hawk.gentoo.org Server Address : 134.68.220.97 Contact Name   : mirror-admin@gentoo.org Hardware       : 1 x Intel(R) Pentium(R) 4 CPU 2.40GHz, 2176MB RAM Please note: common gentoo-netiquette says you should not sync more than once a day.  Users who abuse the rsync.gentoo.org rotation may be added to a temporary ban list. MOTD brought to you by motd-o-matic, version 0.3 receiving file list ... 1 file to consider mkstemp "/var/tmp/.timestamp.chk.x622ns" failed: Read-only file system           32 100%    0.00kB/s    0:00:00 Number of files: 1 Number of files transferred: 1 Total file size: 32 bytes Total transferred file size: 32 bytes Literal data: 32 bytes Matched data: 0 bytes File list size: 32 Total bytes written: 223 Total bytes read: 542 wrote 223 bytes  read 542 bytes  510.00 bytes/sec total size is 32  speedup is 0.04 rsync error: some files could not be transferred (code 23) at main.c(1064) >>> retry ... >>> Starting retry 3 of 3 with rsync://134.68.220.74/gentoo-portage >>> checking server timestamp ... Welcome to crane.gentoo.org Server Address : 134.68.220.74 Contact Name   : mirror-admin@gentoo.org Hardware       : 2 x Intel(R) Xeon(TM) CPU 1700MHz, 2176MB RAM Please note: common gentoo-netiquette says you should not sync more than once a day.  Users who abuse the rsync.gentoo.org rotation may be added to a temporary ban list. MOTD brought to you by motd-o-matic, version 0.3 receiving file list ... 1 file to consider mkstemp "/var/tmp/.timestamp.chk.lZMVFh" failed: Read-only file system           32 100%    0.00kB/s    0:00:00 Number of files: 1 Number of files transferred: 1 Total file size: 32 bytes Total transferred file size: 32 bytes Literal data: 32 bytes Matched data: 0 bytes File list size: 32 Total bytes written: 223 Total bytes read: 538 wrote 223 bytes  read 538 bytes  304.40 bytes/sec total size is 32  speedup is 0.04 rsync error: some files could not be transferred (code 23) at main.c(1064) !!! Rsync has not successfully finished. It is recommended that you keep !!! trying or that you use the 'emerge-webrsync' option if you are unable !!! to use rsync due to firewall or other restrictions. This should be a !!! temporary problem unless complications exist with your network !!! (and possibly your system's filesystem) configuration. Failed to write to mtimedb: [Errno 30] Read-only file system: '/var/cache/edb/mtimedb'

Wo liegt das Problem

Gruss Dave
_________________
Root Server 1: INTEL Core 2 Quad Q6600 "Kentsfield", 4x 2.40GHz, 4GB DDR2 Ram, Gentoo 2007.0 32Bit
Root Server 2: INTEL Core 2 Quad Q6600 "Kentsfield", 4x 2.40GHz, 4GB DDR2 Ram, Gentoo 2007.0 64Bit

[xces]

[Hotstuff]

Hallo

Danke für die schnelle Antwort


Wie ändere ich das?

Gruss Dave
_________________
Root Server 1: INTEL Core 2 Quad Q6600 "Kentsfield", 4x 2.40GHz, 4GB DDR2 Ram, Gentoo 2007.0 32Bit
Root Server 2: INTEL Core 2 Quad Q6600 "Kentsfield", 4x 2.40GHz, 4GB DDR2 Ram, Gentoo 2007.0 64Bit

[xces]

Im besten Fall mit `mount -o remount,rw /var`.
Wenn das nicht klappt, poste mal die Ausgabe von `mount` und deine /etc/fstab.

[Hotstuff]

Hallo

Allso meine fstab config sieht so aus, ist auch noch in der installtion

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/BOOT /boot ext2 noauto,noatime $
/dev/ROOT / xfs noatime $
/dev/SWAP none swap sw $
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro $
#/dev/fd0 /mnt/floppy auto noauto

Gruss Dave
_________________
Root Server 1: INTEL Core 2 Quad Q6600 "Kentsfield", 4x 2.40GHz, 4GB DDR2 Ram, Gentoo 2007.0 32Bit
Root Server 2: INTEL Core 2 Quad Q6600 "Kentsfield", 4x 2.40GHz, 4GB DDR2 Ram, Gentoo 2007.0 64Bit

[mrsteven]

Na ja, du solltest die Platzhalter wie ROOT, BOOT und SWAP halt schon durch die richtigen Devices ersetzen...
Oder bist du noch ganz am Anfang? Dann solltest du natürlich die Partition(en) auch mounten, auf die du Gentoo installieren möchtest und das chroot durchführen. Lies besser noch mal die Anleitung.

[Hotstuff]

Hallo

Problem ist gelöst, habe einfach noch mal angefangen zu installieren.

Gruss und besten Dank
_________________
Root Server 1: INTEL Core 2 Quad Q6600 "Kentsfield", 4x 2.40GHz, 4GB DDR2 Ram, Gentoo 2007.0 32Bit
Root Server 2: INTEL Core 2 Quad Q6600 "Kentsfield", 4x 2.40GHz, 4GB DDR2 Ram, Gentoo 2007.0 64Bit

[m.b.j.]

[beejay]