| View previous topic :: View next topic |
| Author |
Message |
Winterbird
Tux's lil' helper
Joined: 12 Feb 2005
Posts: 84
|
 Posted: Wed Jul 13, 2005 8:01 am Post subject: gentoo router speed problem |
 |
|
Hello, I'm having some troubles with my gentoo router.
Basicly downloading from ftp.du.se from behind the router, I don't get faster speed than about 20k/s, downloading from the router I get around 650k/s, and Downloading from my laptop, directly connected to the internet I get 1.5M/s. I've followed the gentoo home router guide almost completly, I've only forwarded a few extra ports to various computers on the net. The router is a 450Mhz with 128M ram.
another odd thing is that when I download with bittorrent (azureus, limited to 250 connections) I can get at least 200k/s...
any help would be appreciated. |
|
| Back to top |
|
 |
drhirsch
n00b
Joined: 08 May 2004
Posts: 66
Location: Germany
|
| Posted: Wed Jul 13, 2005 9:00 am Post subject: |
|
|
How fast can you download from your router into your local net?
Hows the load on the router during download?
Sounds like a defective NIC for me, maybe a driver issue.
Try replacing it with another model. |
|
| Back to top |
|
|
Winterbird
Tux's lil' helper
Joined: 12 Feb 2005
Posts: 84
|
| Posted: Wed Jul 13, 2005 10:38 am Post subject: |
|
|
when I run top on the router while downloading:
| Code: |
top - 12:25:09 up 14:37, 1 user, load average: 0.00, 0.00, 0.00
Tasks: 29 total, 1 running, 28 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.0% us, 0.0% sy, 0.0% ni, 98.7% id, 0.0% wa, 1.3% hi, 0.0% si
Mem: 126076k total, 36476k used, 89600k free, 2896k buffers
Swap: 1942912k total, 0k used, 1942912k free, 21276k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
6146 root 16 0 2068 1060 844 R 0.7 0.8 0:00.07 top
1 root 16 0 1472 500 444 S 0.0 0.4 0:00.18 init
2 root 34 19 0 0 0 S 0.0 0.0 0:00.12 ksoftirqd/0
3 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 events/0
4 root 10 -5 0 0 0 S 0.0 0.0 0:00.02 khelper
9 root 16 -5 0 0 0 S 0.0 0.0 0:00.00 kthread
17 root 10 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/0
30 root 15 0 0 0 0 S 0.0 0.0 0:00.00 khubd
104 root 20 0 0 0 0 S 0.0 0.0 0:00.00 pdflush
105 root 15 0 0 0 0 S 0.0 0.0 0:00.00 pdflush
107 root 17 -5 0 0 0 S 0.0 0.0 0:00.00 aio/0
106 root 25 0 0 0 0 S 0.0 0.0 0:00.00 kswapd0
693 root 25 0 0 0 0 S 0.0 0.0 0:00.00 kseriod
749 root 15 0 0 0 0 S 0.0 0.0 0:00.02 kjournald
797 root 17 -4 1476 468 408 S 0.0 0.4 0:00.12 udevd
4717 root 16 0 1548 636 536 S 0.0 0.5 0:00.02 metalog
4718 root 16 0 1536 528 460 S 0.0 0.4 0:00.00 metalog
5487 nobody 15 0 1736 756 636 S 0.0 0.6 0:00.29 dnsmasq
5497 dhcp 16 0 2648 1584 984 S 0.0 1.3 0:00.14 dhcpd
5692 root 16 0 3432 1512 1244 S 0.0 1.2 0:00.00 sshd
5723 root 17 0 1612 692 596 S 0.0 0.5 0:00.00 agetty
5728 root 17 0 1612 692 596 S 0.0 0.5 0:00.00 agetty
5729 root 16 0 1612 692 596 S 0.0 0.5 0:00.00 agetty
5730 root 17 0 1612 692 596 S 0.0 0.5 0:00.00 agetty
5731 root 16 0 1612 692 596 S 0.0 0.5 0:00.00 agetty
5732 root 16 0 1612 692 596 S 0.0 0.5 0:00.00 agetty
6116 root 15 0 1484 480 424 S 0.0 0.4 0:00.17 dhcpcd
6131 root 16 0 6408 2020 1624 S 0.0 1.6 0:00.23 sshd
6137 root 15 0 2396 1416 1172 S 0.0 1.1 0:00.05 bash |
unfortunatly I don't have another nic to test with atm...
the cards I have in it right now is:
eth0 (LAN):
| Code: | Bus 0, device 3, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16).
IRQ 5.
Master Capable. Latency=66. Min Gnt=32.Max Lat=64.
I/O at 0x2000 [0x20ff].
Non-prefetchable 32 bit memory at 0x41200000 [0x412000ff]. |
eth1 (WAN):
| Code: | Bus 0, device 4, function 0:
Ethernet controller: 3Com Corporation 3c595 100BaseTX [Vortex] (rev 0).
IRQ 3.
Master Capable. Latency=248. Min Gnt=3.Max Lat=8.
I/O at 0x2880 [0x289f]. |
I'm going to try to change the cables to start with, if that doesn't solve the problem I'll probably better go looking for a new NIC.
Edit. To download from router to internal computer goes at at least 4.5M/s |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
