View previous topic :: View next topic |
Author |
Message |
DetectiveInspekta n00b
Joined: 27 Jun 2005 Posts: 58 Location: New Zealand
|
Posted: Sat Jul 16, 2005 4:15 am Post subject: alsa and colplug |
|
|
Alsa works, I built it into the kernel using genkernel and didn't put the OSS feature in sound section
Coldplug tries to modprobe modules that are kind of related to oss, I think.
How do I get rid of it?
Also, am I right in saying alsa still doesn't preform as well as the window drivers for a soundblaster 2 zs, and that
buying a good sound card it a waste of time if your only using linux? I can't get enough bass out of alsa, no where near that of
what I can get in windows. I'd like it to get to the point where my bass bottoms out instead of the speaker bottoming out. |
|
Back to top |
|
|
ikaro Advocate
Joined: 14 Jul 2003 Posts: 2527 Location: Denmark
|
Posted: Sat Jul 16, 2005 5:42 am Post subject: |
|
|
you think it tries to modprobe something ? but you are not sure....
if you dont need OSS - disable it in the kernel.
see if you have soemthing in /etc/modules.autoload/kernel-2.x
and your other question: probably.
remember that drivers for hardware in linux its all a guess work and reverse engineering.
while in windows they get all the info they need.
That goes for pretty much all hardware. _________________ linux: #232767 |
|
Back to top |
|
|
DetectiveInspekta n00b
Joined: 27 Jun 2005 Posts: 58 Location: New Zealand
|
Posted: Sun Jul 17, 2005 10:22 pm Post subject: |
|
|
yea it does try to modprobe stuff on startup
this is the /var/log/messages |
|
Back to top |
|
|
DetectiveInspekta n00b
Joined: 27 Jun 2005 Posts: 58 Location: New Zealand
|
Posted: Sun Jul 17, 2005 10:26 pm Post subject: |
|
|
Code: |
Jul 18 08:26:16 BooYa #0: Sound Blaster Audigy2 (rev.4, serial:0x20021102) at 0x c000, irq 18
Jul 18 08:26:16 BooYa NET: Registered protocol family 2
Jul 18 08:26:16 BooYa IP: routing cache hash table of 8192 buckets, 64Kbytes
Jul 18 08:26:16 BooYa TCP established hash table entries: 262144 (order: 9, 2097 152 bytes)
Jul 18 08:26:16 BooYa TCP bind hash table entries: 65536 (order: 7, 524288 bytes )
Jul 18 08:26:16 BooYa TCP: Hash tables configured (established 262144 bind 65536 )
Jul 18 08:26:16 BooYa NET: Registered protocol family 1
Jul 18 08:26:16 BooYa NET: Registered protocol family 17
Jul 18 08:26:16 BooYa RAMDISK: Compressed image found at block 0
Jul 18 08:26:16 BooYa VFS: Mounted root (ext2 filesystem).
Jul 18 08:26:16 BooYa kjournald starting. Commit interval 5 seconds
Jul 18 08:26:16 BooYa EXT3-fs: mounted filesystem with ordered data mode.
Jul 18 08:26:16 BooYa VFS: Mounted root (ext3 filesystem) readonly.
Jul 18 08:26:16 BooYa Trying to move old root to /initrd ... failed
Jul 18 08:26:16 BooYa Unmounting old root
Jul 18 08:26:16 BooYa Trying to free ramdisk memory ... okay
Jul 18 08:26:16 BooYa Freeing unused kernel memory: 188k freed
Jul 18 08:26:16 BooYa Adding 1004052k swap on /dev/hdc2. Priority:-1 extents:1
Jul 18 08:26:16 BooYa EXT3 FS on hdc3, internal journal
Jul 18 08:26:16 BooYa forcedeth.c: Reverse Engineered nForce ethernet driver. Ve rsion 0.31.
Jul 18 08:26:16 BooYa ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Jul 18 08:26:16 BooYa ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high ) -> IRQ 22
Jul 18 08:26:16 BooYa PCI: Setting latency timer of device 0000:00:04.0 to 64
Jul 18 08:26:16 BooYa eth0: forcedeth.c: subsystem: 010de:0c11 bound to 0000:00: 04.0
Jul 18 08:26:16 BooYa usbcore: registered new driver usbfs
Jul 18 08:26:16 BooYa usbcore: registered new driver hub
Jul 18 08:26:16 BooYa eth0: no link during initialization.
Jul 18 08:26:16 BooYa Real Time Clock Driver v1.12
Jul 18 08:26:16 BooYa hal.hotplug[6518]: DEVPATH is not set
Jul 18 08:26:16 BooYa hal.hotplug[6557]: DEVPATH is not set
Jul 18 08:26:17 BooYa hal.hotplug[6581]: DEVPATH is not set
Jul 18 08:26:17 BooYa hal.hotplug[6605]: DEVPATH is not set
Jul 18 08:26:17 BooYa hal.hotplug[6629]: DEVPATH is not set
Jul 18 08:26:17 BooYa hal.hotplug[6653]: DEVPATH is not set
Jul 18 08:26:17 BooYa hal.hotplug[6677]: DEVPATH is not set
Jul 18 08:26:18 BooYa hal.hotplug[6701]: DEVPATH is not set
Jul 18 08:26:18 BooYa hal.hotplug[6725]: DEVPATH is not set
Jul 18 08:26:18 BooYa ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI ) Driver (PCI)
Jul 18 08:26:18 BooYa ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
Jul 18 08:26:18 BooYa ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 21 (level, high ) -> IRQ 21
Jul 18 08:26:18 BooYa ohci_hcd 0000:00:02.0: OHCI Host Controller
Jul 18 08:26:18 BooYa PCI: Setting latency timer of device 0000:00:02.0 to 64
Jul 18 08:26:18 BooYa ohci_hcd 0000:00:02.0: irq 21, pci mem 0xdf001000
Jul 18 08:26:18 BooYa ohci_hcd 0000:00:02.0: new USB bus registered, assigned bu s number 1
Jul 18 08:26:18 BooYa hub 1-0:1.0: USB hub found
Jul 18 08:26:18 BooYa hub 1-0:1.0: 3 ports detected
Jul 18 08:26:18 BooYa ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
Jul 18 08:26:18 BooYa ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 20 (level, high ) -> IRQ 20
Jul 18 08:26:18 BooYa ohci_hcd 0000:00:02.1: OHCI Host Controller
Jul 18 08:26:18 BooYa PCI: Setting latency timer of device 0000:00:02.1 to 64
Jul 18 08:26:18 BooYa ohci_hcd 0000:00:02.1: irq 20, pci mem 0xdf002000
Jul 18 08:26:18 BooYa ohci_hcd 0000:00:02.1: new USB bus registered, assigned bu s number 2
Jul 18 08:26:18 BooYa hub 2-0:1.0: USB hub found
Jul 18 08:26:18 BooYa hub 2-0:1.0: 3 ports detected
Jul 18 08:26:18 BooYa hal.hotplug[6850]: DEVPATH is not set
Jul 18 08:26:18 BooYa usb 1-1: new full speed USB device using ohci_hcd and addr ess 2
Jul 18 08:26:18 BooYa hub 1-1:1.0: USB hub found
Jul 18 08:26:18 BooYa hub 1-1:1.0: 3 ports detected
Jul 18 08:26:18 BooYa hal.hotplug[6923]: DEVPATH is not set
Jul 18 08:26:18 BooYa ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
Jul 18 08:26:18 BooYa ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 22 (level, high ) -> IRQ 22
Jul 18 08:26:18 BooYa ehci_hcd 0000:00:02.2: EHCI Host Controller
Jul 18 08:26:18 BooYa PCI: Setting latency timer of device 0000:00:02.2 to 64
Jul 18 08:26:18 BooYa ehci_hcd 0000:00:02.2: irq 22, pci mem 0xdf003000
Jul 18 08:26:18 BooYa ehci_hcd 0000:00:02.2: new USB bus registered, assigned bu s number 3
Jul 18 08:26:18 BooYa PCI: cache line size of 64 is not supported by device 0000 :00:02.2
Jul 18 08:26:18 BooYa ehci_hcd 0000:00:02.2: park 0
Jul 18 08:26:18 BooYa ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, dri ver 10 Dec 2004
Jul 18 08:26:18 BooYa hub 3-0:1.0: USB hub found
Jul 18 08:26:18 BooYa hub 3-0:1.0: 6 ports detected
Jul 18 08:26:19 BooYa hub 1-1:1.0: hub_port_status failed (err = -110)
Jul 18 08:26:19 BooYa hub 1-1:1.0: connect-debounce failed, port 3 disabled
Jul 18 08:26:19 BooYa hub 1-1:1.0: cannot disable port 3 (err = -110)
Jul 18 08:26:19 BooYa hub 1-1:1.0: hub_hub_status failed (err = -110)
Jul 18 08:26:19 BooYa hub 1-1:1.0: get_hub_status failed
Jul 18 08:26:19 BooYa hal.hotplug[7048]: DEVPATH is not set
Jul 18 08:26:19 BooYa usb 1-1: USB disconnect, address 2
Jul 18 08:26:19 BooYa hal.hotplug[7129]: DEVPATH is not set
Jul 18 08:26:19 BooYa usb 1-1: new full speed USB device using ohci_hcd and addr ess 3
Jul 18 08:26:19 BooYa hub 1-1:1.0: USB hub found
Jul 18 08:26:19 BooYa hub 1-1:1.0: 3 ports detected
Jul 18 08:26:19 BooYa hal.hotplug[7166]: DEVPATH is not set
Jul 18 08:26:19 BooYa libata version 1.10 loaded.
Jul 18 08:26:19 BooYa hal.hotplug[7244]: DEVPATH is not set
Jul 18 08:26:19 BooYa usb 1-1.3: new full speed USB device using ohci_hcd and ad dress 4
Jul 18 08:26:20 BooYa hal.hotplug[7337]: DEVPATH is not set
Jul 18 08:26:20 BooYa usbcore: registered new driver hiddev
Jul 18 08:26:20 BooYa hal.hotplug[7443]: DEVPATH is not set
Jul 18 08:26:20 BooYa hal.hotplug[7461]: DEVPATH is not set
Jul 18 08:26:20 BooYa input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Exte nded USB Keyboard] on usb-0000:00:02.0-1.3
Jul 18 08:26:20 BooYa snd: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3' shou ld be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:20 BooYa modprobe: WARNING: Error inserting snd (/lib/modules/2.6.1 1-gentoo-r3/alsa-driver/acore/snd.ko): Invalid module format
Jul 18 08:26:20 BooYa snd_hwdep: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3 ' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:20 BooYa modprobe: WARNING: Error inserting snd_hwdep (/lib/modules /2.6.11-gentoo-r3/alsa-driver/acore/snd-hwdep.ko): Invalid module format
Jul 18 08:26:20 BooYa snd_util_mem: version magic '2.6.11-gentoo-r3 SMP 486 gcc- 3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:20 BooYa modprobe: WARNING: Error inserting snd_util_mem (/lib/modu les/2.6.11-gentoo-r3/alsa-driver/synth/snd-util-mem.ko): Invalid module format
Jul 18 08:26:20 BooYa snd_page_alloc: version magic '2.6.11-gentoo-r3 SMP 486 gc c-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:20 BooYa modprobe: WARNING: Error inserting snd_page_alloc (/lib/mo dules/2.6.11-gentoo-r3/alsa-driver/acore/snd-page-alloc.ko): Invalid module form at
Jul 18 08:26:20 BooYa snd_timer: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3 ' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:20 BooYa modprobe: WARNING: Error inserting snd_timer (/lib/modules /2.6.11-gentoo-r3/alsa-driver/acore/snd-timer.ko): Invalid module format
Jul 18 08:26:20 BooYa snd_pcm: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:20 BooYa modprobe: WARNING: Error inserting snd_pcm (/lib/modules/2 .6.11-gentoo-r3/alsa-driver/acore/snd-pcm.ko): Invalid module format
Jul 18 08:26:20 BooYa snd_ac97_codec: version magic '2.6.11-gentoo-r3 SMP 486 gc c-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:20 BooYa modprobe: WARNING: Error inserting snd_ac97_codec (/lib/mo dules/2.6.11-gentoo-r3/alsa-driver/pci/ac97/snd-ac97-codec.ko): Invalid module f ormat
Jul 18 08:26:20 BooYa snd_seq_device: version magic '2.6.11-gentoo-r3 SMP 486 gc c-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:20 BooYa modprobe: WARNING: Error inserting snd_seq_device (/lib/mo dules/2.6.11-gentoo-r3/alsa-driver/acore/seq/snd-seq-device.ko): Invalid module format
Jul 18 08:26:20 BooYa snd_rawmidi: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3 .3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:20 BooYa modprobe: WARNING: Error inserting snd_rawmidi (/lib/modul es/2.6.11-gentoo-r3/alsa-driver/acore/snd-rawmidi.ko): Invalid module format
Jul 18 08:26:20 BooYa snd_emu10k1: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3 .3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:20 BooYa modprobe: FATAL: Error inserting snd_emu10k1 (/lib/modules /2.6.11-gentoo-r3/alsa-driver/pci/emu10k1/snd-emu10k1.ko): Invalid module format
Jul 18 08:26:20 BooYa hal.hotplug[7479]: DEVPATH is not set
Jul 18 08:26:20 BooYa input: USB HID v1.10 Device [Mitsumi Electric Apple Extend ed USB Keyboard] on usb-0000:00:02.0-1.3
Jul 18 08:26:20 BooYa usbcore: registered new driver usbhid
Jul 18 08:26:20 BooYa drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Jul 18 08:26:20 BooYa hal.hotplug[7593]: DEVPATH is not set
Jul 18 08:26:21 BooYa hal.hotplug[7636]: DEVPATH is not set
Jul 18 08:26:21 BooYa ieee1394: Initialized config rom entry `ip1394'
Jul 18 08:26:21 BooYa ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
Jul 18 08:26:21 BooYa ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
Jul 18 08:26:21 BooYa ACPI: PCI interrupt 0000:01:07.2[B] -> GSI 19 (level, high ) -> IRQ 19
Jul 18 08:26:21 BooYa ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[d e004000-de0047ff] Max Packet=[2048]
Jul 18 08:26:21 BooYa hal.hotplug[7867]: DEVPATH is not set
Jul 18 08:26:21 BooYa ieee1394.agent[7882]: ... no drivers for IEEE1394 product 0x/0x/0x
Jul 18 08:26:21 BooYa radeonfb_pci_register BEGIN
Jul 18 08:26:21 BooYa ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high ) -> IRQ 19
Jul 18 08:26:21 BooYa PCI: Unable to reserve mem region #1:8000000@c8000000 for device 0000:02:00.0
Jul 18 08:26:21 BooYa radeonfb (0000:02:00.0): cannot reserve PCI regions. Some one already got them?
Jul 18 08:26:21 BooYa radeonfb: probe of 0000:02:00.0 failed with error -16
Jul 18 08:26:21 BooYa hal.hotplug[7934]: DEVPATH is not set
Jul 18 08:26:22 BooYa Floppy drive(s): fd0 is 1.44M
Jul 18 08:26:22 BooYa FDC 0 is a post-1991 82077
Jul 18 08:26:22 BooYa parport: PnPBIOS parport detected.
Jul 18 08:26:22 BooYa parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Jul 18 08:26:22 BooYa snd: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3' shou ld be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd (/lib/modules/2.6.1 1-gentoo-r3/alsa-driver/acore/snd.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_seq_device: version magic '2.6.11-gentoo-r3 SMP 486 gc c-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_seq_device (/lib/mo dules/2.6.11-gentoo-r3/alsa-driver/acore/seq/snd-seq-device.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_rawmidi: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3 .3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_rawmidi (/lib/modul es/2.6.11-gentoo-r3/alsa-driver/acore/snd-rawmidi.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_mpu401_uart: version magic '2.6.11-gentoo-r3 SMP 486 g cc-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_mpu401_uart (/lib/m odules/2.6.11-gentoo-r3/alsa-driver/drivers/mpu401/snd-mpu401-uart.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_page_alloc: version magic '2.6.11-gentoo-r3 SMP 486 gc c-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_page_alloc (/lib/mo dules/2.6.11-gentoo-r3/alsa-driver/acore/snd-page-alloc.ko): Invalid module form at
Jul 18 08:26:22 BooYa snd_timer: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3 ' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_timer (/lib/modules /2.6.11-gentoo-r3/alsa-driver/acore/snd-timer.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_pcm: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_pcm (/lib/modules/2 .6.11-gentoo-r3/alsa-driver/acore/snd-pcm.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_cs4231_lib: version magic '2.6.11-gentoo-r3 SMP 486 gc c-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_cs4231_lib (/lib/mo dules/2.6.11-gentoo-r3/alsa-driver/isa/cs423x/snd-cs4231-lib.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_hwdep: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3 ' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_hwdep (/lib/modules /2.6.11-gentoo-r3/alsa-driver/acore/snd-hwdep.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_opl3_lib: version magic '2.6.11-gentoo-r3 SMP 486 gcc- 3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_opl3_lib (/lib/modu les/2.6.11-gentoo-r3/alsa-driver/drivers/opl3/snd-opl3-lib.ko): Invalid module f ormat
Jul 18 08:26:22 BooYa snd_cs4232: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3. 3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: FATAL: Error inserting snd_cs4232 (/lib/modules/ 2.6.11-gentoo-r3/alsa-driver/isa/cs423x/snd-cs4232.ko): Invalid module format
Jul 18 08:26:22 BooYa snd: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3' shou ld be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd (/lib/modules/2.6.1 1-gentoo-r3/alsa-driver/acore/snd.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_seq_device: version magic '2.6.11-gentoo-r3 SMP 486 gc c-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_seq_device (/lib/mo dules/2.6.11-gentoo-r3/alsa-driver/acore/seq/snd-seq-device.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_rawmidi: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3 .3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_rawmidi (/lib/modul es/2.6.11-gentoo-r3/alsa-driver/acore/snd-rawmidi.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_mpu401_uart: version magic '2.6.11-gentoo-r3 SMP 486 g cc-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_mpu401_uart (/lib/m odules/2.6.11-gentoo-r3/alsa-driver/drivers/mpu401/snd-mpu401-uart.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_page_alloc: version magic '2.6.11-gentoo-r3 SMP 486 gc c-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_page_alloc (/lib/mo dules/2.6.11-gentoo-r3/alsa-driver/acore/snd-page-alloc.ko): Invalid module form at
Jul 18 08:26:22 BooYa snd_timer: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3 ' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_timer (/lib/modules /2.6.11-gentoo-r3/alsa-driver/acore/snd-timer.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_pcm: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_pcm (/lib/modules/2 .6.11-gentoo-r3/alsa-driver/acore/snd-pcm.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_cs4231_lib: version magic '2.6.11-gentoo-r3 SMP 486 gc c-3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_cs4231_lib (/lib/mo dules/2.6.11-gentoo-r3/alsa-driver/isa/cs423x/snd-cs4231-lib.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_hwdep: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3.3 ' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_hwdep (/lib/modules /2.6.11-gentoo-r3/alsa-driver/acore/snd-hwdep.ko): Invalid module format
Jul 18 08:26:22 BooYa snd_opl3_lib: version magic '2.6.11-gentoo-r3 SMP 486 gcc- 3.3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
Jul 18 08:26:22 BooYa modprobe: WARNING: Error inserting snd_opl3_lib (/lib/modu les/2.6.11-gentoo-r3/alsa-driver/drivers/opl3/snd-opl3-lib.ko): Invalid module f ormat
Jul 18 08:26:22 BooYa snd_cs4232: version magic '2.6.11-gentoo-r3 SMP 486 gcc-3. 3' should be '2.6.11-gentoo-r3 SMP K7 gcc-3.3'
|
|
|
Back to top |
|
|
DetectiveInspekta n00b
Joined: 27 Jun 2005 Posts: 58 Location: New Zealand
|
Posted: Sun Jul 17, 2005 10:27 pm Post subject: |
|
|
and also I don't have mkresierfs even though it is compiled in the kernel, is there something I need to emerge? |
|
Back to top |
|
|
3nd3r n00b
Joined: 25 Aug 2004 Posts: 38 Location: /dev/null
|
Posted: Mon Jul 18, 2005 8:42 am Post subject: |
|
|
try this:
emerge sys-fs/reiserfsprogs sys-fs/reiser4progs |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|