| View previous topic :: View next topic |
| Author |
Message |
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
 Posted: Wed Feb 19, 2003 12:17 am Post subject: Help!!! Xfree -configure No Errors but x will not start |
 |
|
Hi,
Sorry I am a noob ;p
I just installed Gentoo 1.4_rc2
All was fine 
Emerge xfree
Emerged Nvidia-GLX & Kernel
all fine
Did XFree86 -configure
Returned no errors
nano -w XF86Config.new
Picked up My Nvidia Drivers & Card
Driver is nvidia
Tried with Just XFree86 it tries to start, screen flickers, no Nvidia Logo Screen is blank 
Keyboard disabled can't ALT-CTRL-DEL
Have to reset mc
Read Nvidia Trouble Shooting
thought it might be AGP so put Option
NvAGP "0" under screen options
tried to startx again
nope just a blank screen
re-boot
modprobed nvidia yep it is there
checked XFree86Config file in /etc/X11/ mad sure GLcore not being loaded nope it isn't
commented out load dri
checked to see if load glx was there it is
checked my xfree.log file
no apparant errors but can't see where it is loading module glx anywhere
I am did not build nvidia FBdev in kernel
I did build agp support for my via chipset
Checked the sample config file against mine
My machine is
Abit KR7A Raid (raid disabled in bios)
Gainward GEFiorce 2 mx400 64mb Ram
512 MB Ram
40 & 15.3 GB ata 100 Maxtor hdd
1X Liteon CDRW
1x DVD
Gentoo Sources kernel 2.4.20-r1
Please can someone help me out here
BTW I am logged in as root, this is the only user I have set up at the moment.
Oh yeah and when I did modules-update, it did complain about a svga_helper.o module I did a depmod but it still appears there, weird really, because after I built kernel this error was not there
any help appreciated Please |
|
| Back to top |
|
 |
fifo
Guru
Joined: 14 Jan 2003
Posts: 437
|
| Posted: Wed Feb 19, 2003 12:57 am Post subject: |
|
|
| Not sure what the problem is. It might help if you could show us your /etc/X11/XF86Config and /var/log/XFree86.0.log files. |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Wed Feb 19, 2003 1:03 am Post subject: |
|
|
| fifo wrote: | | Not sure what the problem is. It might help if you could show us your /etc/X11/XF86Config and /var/log/XFree86.0.log files. |
hmmm this might be a tadge difficult
I am on another machine doing this winXP that cant talk to the other machine
should I be able to modprobe glx ?
load glx does not appear in my xfree log file any where
but it is set to Load glx in XF86Config File
I did the opengl-update nvidia bit as well it that went ok
I will try and save files to floppy and see if that works |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Wed Feb 19, 2003 1:19 am Post subject: |
|
|
| fifo wrote: | | Not sure what the problem is. It might help if you could show us your /etc/X11/XF86Config and /var/log/XFree86.0.log files. |
Ok here is my XF86Config File
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "glx"
Load "record"
Load "extmod"
Load "dbe"
#Load "dri"
Load "xtrap"
Load "type1"
Load "speedo"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Hansol"
ModelName "900P"
HorizSync 30-96
VertRefresh 47-150
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "DigitalVibrance" # <i>
#Option "PageFlip" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "NoLogo" # [<bool>]
#Option "Overlay" # [<bool>]
#Option "UBB" # [<bool>]
#Option "Stereo" # <i>
#Option "WindowFlip" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "VideoKey" # <i>
#Option "NvAGP" # <i>
#Option "IgnoreEDID" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ConnectedMonitor" # <str>
#Option "ConnectedMonitors" # <str>
#Option "TVStandard" # <str>
#Option "TVOutFormat" # <str>
#Option "RenderAccel" # [<bool>]
#Option "CursorShadow" # [<bool>]
#Option "CursorShadowAlpha" # <i>
#Option "CursorShadowXOffset" # <i>
#Option "CursorShadowYOffset" # <i>
#Option "UseEdidFreqs" # [<bool>]
#Option "FlatPanelProperties" # <str>
#Option "TwinView" # [<bool>]
#Option "TwinViewOrientation" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "MetaModes" # <str>
#Option "UseInt10Module" # [<bool>]
#Option "SwapReady" # [<bool>]
#Option "NoTwinViewXineramaInfo" # [<bool>]
#Option "NoRenderExtension" # [<bool>]
#Option "UseClipIDs" # [<bool>]
#Option "CIOverlay" # [<bool>]
#Option "TransparentIndex" # <i>
#Option "OverlayDefaultVisual" # [<bool>]
#Option "NvEmulate" # <i>
#Option "NoBandWidthTest" # [<bool>]
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV11 [GeForce2 MX]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Option "NvAgp" "0"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
and here is my log File
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.2.99.4 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 20 January 2003
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20-gentoo-r1 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Feb 18 23:22:01 2003
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000780c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 0000,0824 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 1102,0002 card 1102,8064 rev 07 class 04,01,00 hdr 80
(II) PCI: 00:0d:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
(II) PCI: 00:0f:0: chip 10ec,8139 card 1429,d010 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:11:0: chip 1106,3074 card 1106,3074 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00
(II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0110 card 10b0,0001 rev b2 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xec000000 - 0xedffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV11 [GeForce2 MX] rev 178, Mem @ 0xec000000/24, 0xe0000000/27
List of video drivers:
nvidia
radeon
atimisc
r128
mga
glint
nv
tga
s3
s3virge
sis
rendition
neomagic
i740
tdfx
savage
cirrus
vmware
tseng
trident
chips
apm
fbdev
i128
nsc
ati
i810
imstt
newport
ark
cyrix
siliconmotion
vesa
vga
dummy
v4l
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4191
Module class: XFree86 Video Driver
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 6.4.18
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.1.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "glint"
(II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
(II) Module glint: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "tga"
(II) Loading /usr/X11R6/lib/modules/drivers/tga_drv.o
(II) Module tga: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "s3"
(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 0.3.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.8.3
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 0.6.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "rendition"
(II) Loading /usr/X11R6/lib/modules/drivers/rendition_drv.o
(II) Module rendition: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 4.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "neomagic"
(II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.o
(II) Module neomagic: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "i740"
(II) Loading /usr/X11R6/lib/modules/drivers/i740_drv.o
(II) Module i740: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "tdfx"
(II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.1.27
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "cirrus"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
(II) Module cirrus: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module t mode "1600x1200" (hsync out of range)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "1792x1344" (hsync out of range)
(II) NV(0): Not using default mode "896x672" (hsync out of range)
(II) NV(0): Not using default mode "1856x1392" (hsync out of range)
(II) NV(0): Not using default mode "928x696" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "1920x1440" (hsync out of range)
(II) NV(0): Not using default mode "960x720" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (hsync out of range)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using mode "600x480" (no mode of this name)
(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NV(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NV(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NV(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NV(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) NV(0): Virtual size is 1280x1024 (pitch 1280)
(**) NV(0): *Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(II) NV(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
(**) NV(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) NV(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) NV(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NV(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) NV(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) NV(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) NV(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) NV(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(II) NV(0): Modeline "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
(**) NV(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) NV(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) NV(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) NV(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz
(II) NV(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
(**) NV(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) NV(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) NV(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) NV(0): Default mode "1024x768": 133.5 MHz, 95.3 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "1024x768" 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync
(**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) NV(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "960x720" 117.00 960 1024 1128 1300 720 720 722 750z, 37.9 kHz, 85.1 Hz
(II) NV(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(**) NV(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) NV(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) NV(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(II) NV(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync
(**) NV(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) NV(0): Modeline "512x384" 39.40 512 520 568 656 384 3 |
|
| Back to top |
|
|
fifo
Guru
Joined: 14 Jan 2003
Posts: 437
|
| Posted: Wed Feb 19, 2003 1:37 am Post subject: |
|
|
Did your XFree86.0.log get truncated when you posted it or does it really end mid-line like that? There don't seem to be any problems up to this point that I can see. One thing is you might like to do though is specify your keyboard type, for example,
| Code: |
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
|
but this can't be what's causing the problem. |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Wed Feb 19, 2003 1:44 am Post subject: |
|
|
| fifo wrote: | Did your XFree86.0.log get truncated when you posted it or does it really end mid-line like that? There don't seem to be any problems up to this point that I can see. One thing is you might like to do though is specify your keyboard type, for example,
| Code: |
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
|
but this can't be what's causing the problem. |
Yes that is exactly how it is I do not know if it was truncated or not?
I just tried what you suggested and still locks up with blank screen keyboard is dead
I just re-emerged the nvidia drivers also
I can not find the glx module anywhere though.
definately no errors when emergeing nvidia drivers though
maybe my video card isnt supported |
|
| Back to top |
|
|
fifo
Guru
Joined: 14 Jan 2003
Posts: 437
|
| Posted: Wed Feb 19, 2003 1:50 am Post subject: |
|
|
| Does it work if you replace Driver "nvidia" with Driver "nv" and comment out the Load "glx" line? |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Wed Feb 19, 2003 9:58 am Post subject: |
|
|
| fifo wrote: | | Does it work if you replace Driver "nvidia" with Driver "nv" and comment out the Load "glx" line? |
Hmmm I have not tried this option as yet
I think there may be some time difference between what forum says and what itme it is over her
it is 08:57 am here now
I am at work will try this later and post
thanks for your help so far |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Wed Feb 19, 2003 6:13 pm Post subject: |
|
|
| fifo wrote: | | Does it work if you replace Driver "nvidia" with Driver "nv" and comment out the Load "glx" line? |
Hi Yes it does
The res is mangled really low & seems to be displaying 640x480
but it does work
I also had to take out the horiz and vert settings to get it to work
so this means I almost there right ?
I just unmerged nvidia-kernel & nvidia-glx
what might you suggest now ?
a re-emerge of nvidia drivers ?
or just live without gl stuff ?
I do admit to liking quake 3 and tuxracer though, but I suppose if I cant have it I will just have to live without it |
|
| Back to top |
|
|
coolcut
n00b
Joined: 21 Jan 2003
Posts: 21
Location: Belgium
|
| Posted: Wed Feb 19, 2003 8:55 pm Post subject: |
|
|
I' have the same problem, and the suggested solution did not work
I get the Nvidia startup screen, and then everything freezes
does anybody have any ideas
tnx |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Wed Feb 19, 2003 11:33 pm Post subject: ??? Baffled What is this all about ?? |
|
|
Hi
Ok just tried re emerging NVidia Drivers for the upteenth time
as usual it failed
I rebooted machine and went to edit /etc/X11/XF86Config
and this was what was in the file
/lib/modules/2.4.20-gentoo-r1/kernel/arch/i386/kernel/cpuid.o:
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-aes.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-blowfish.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-blowfish_old.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-cast5.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-des.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-des_ede3.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-dfc.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-dummy.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-idea.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-mars.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-rc5.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-rc6.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-serpent.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/ciphers/cipher-twofish.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o:
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoloop/cryptoloop.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o \
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/block/loop.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/digests/digest-md5.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/crypto/digests/digest-sha1.o: /lib/modules/2.4.20-gentoo-r1/kernel/crypto/cryptoapi.o
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/acpi/button.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/acpi/fan.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/acpi/processor.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/block/loop.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/block/paride/paride.o: /lib/modules/2.4.20-gentoo-r1/kernel/drivers/parport/parport.o
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/block/paride/pg.o: /lib/modules/2.4.20-gentoo-r1/kernel/drivers/block/paride/paride.o
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/block/rd.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/agp/agpgart.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/ecc.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/joystick/analog.o: /lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/joystick/gameport.o \
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/input/input.o
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/joystick/emu10k1-gp.o: /lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/joystick/gameport.o
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/joystick/gameport.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/joystick/sidewinder.o: /lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/joystick/gameport.o \
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/input/input.o
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/n_hdlc.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/ppdev.o: /lib/modules/2.4.20-gentoo-r1/kernel/drivers/parport/parport.o
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/char/rtc.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/evms/AIXlvm_vge.o: /lib/modules/2.4.20-gentoo-r1/kernel/drivers/evms/evms.o
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/evms/dos_part.o: /lib/modules/2.4.20-gentoo-r1/kernel/drivers/ers/net/mii.o
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/net/bsd_comp.o: /lib/modules/2.4.20-gentoo-r1/kernel/drivers/net/ppp_generic.o
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/net/dummy.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/net/mii.o:
/lib/modules/2.4.20-gentoo-r1/kernel/drivers/net/plip.o: /lib/modules/2.4.20-gentoo-r1/kernel/drivers/parport/parport.o
/lib/modules/
what is this all about ???
I know these are the kernel modules I built from kernel, but why is all this overwritten my XF86Config file ????
When I built kernel I did
make mrproper
make dep && make clean bzImage modules modules_install
modules-update
back to bash prompt
can some one please let me know what is hapening here
this might explain why X just gives me a blank screen
TIA |
|
| Back to top |
|
|
fifo
Guru
Joined: 14 Jan 2003
Posts: 437
|
| Posted: Wed Feb 19, 2003 11:47 pm Post subject: |
|
|
Yeric,
If you took out the horiz/vert settings then that's why you're stuck with 640x480, the default settings don't allow anything else. You could try something more conservative than you had before, like say HorizSync 30-82, VertRefresh 50-120, and then set the 24-bit display section to say
| Code: |
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
|
and if that works, try increasing the settings till you get what you want. Once everything's working fine with nv, you could try again with nvidia. Remerge nvidia-glx and nvidia-kernel, uncomment the Load "glx" line, "modprobe NVdriver", then startx. If you still have problems, perhaps the following link might be helpful: http://www.gentoo.org/doc/en/nvidia_tsg.xml. |
|
| Back to top |
|
|
fifo
Guru
Joined: 14 Jan 2003
Posts: 437
|
| Posted: Wed Feb 19, 2003 11:56 pm Post subject: |
|
|
Your XF86Config file is overwritten--never seen that before  . Are you sure you didn't perhaps redirect some output over the file by mistake?
About the steps you use to compile the kernel, "make mrproper" will delete your current kernel configuration settings if you don't save them somewhere else first. To use "make mrproper" you should be doing something like:
| Code: |
# cd /usr/src/linux
# cp .config /tmp
# make mrproper
# mv /tmp/.config .
# make menuconfig
# make dep
|
etc... |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Thu Feb 20, 2003 12:25 am Post subject: |
|
|
| fifo wrote: | Yeric,
If you took out the horiz/vert settings then that's why you're stuck with 640x480, the default settings don't allow anything else. You could try something more conservative than you had before, like say HorizSync 30-82, VertRefresh 50-120, and then set the 24-bit display section to say
| Code: |
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
|
and if that works, try increasing the settings till you get what you want. Once everything's working fine with nv, you could try again with nvidia. Remerge nvidia-glx and nvidia-kernel, uncomment the Load "glx" line, "modprobe NVdriver", then startx. If you still have problems, perhaps the following link might be helpful: http://www.gentoo.org/doc/en/nvidia_tsg.xml. |
Ok just to make sure I didn't redirect I did it again this time just typing X at the prompt all ok with nv and got it up to 1280x1024 (19" monitor)
tried uncommenting glx and renaming to nvidia
again just X at the prompt
exactly the same problem
now my XF86Config files is wiped good job I made a backup first
I have never seen anything like this before either like you said in your post itis almost as if output is being directed to my XF86Config file ,but how ? and this is the kernel lib modules not the x config file
this just gets weirder and weirder
well I am shattered now, Off to try and get some sleep, will look at it again tomorrow refreshed
unfortunately I feel I am going to have to rebuild the whole lot agian aren't I |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Thu Feb 20, 2003 10:34 am Post subject: |
|
|
| fifo wrote: |
and if that works, try increasing the settings till you get what you want. Once everything's working fine with nv, you could try again with nvidia. Remerge nvidia-glx and nvidia-kernel, uncomment the Load "glx" line, "modprobe NVdriver", then startx. If you still have problems, perhaps the following link might be helpful: http://www.gentoo.org/doc/en/nvidia_tsg.xml. |
Believe me I have looked at this guide many times it has been well thumbed
I think this may be slightly dated though, as it refers to NVDriver rather than nvidia as it is now known also mentions building nvidia with make installs rather than good old emerge 
I am specifically interested in this one though
modprobe NVdriver NVreg_SkipBiosPost=1
I have not tried this yet
This will be a last hope attempt if this fails I do not know
I am questioning some thing else from the trouble shoot guide
crw-rw---- 1 root video 195, 0 Jan 4 23:19 /dev/nvidia0
crw-rw---- 1 root video 195, 1 Jan 4 23:19 /dev/nvidia1
crw-rw---- 1 root video 195, 2 Jan 4 23:19 /dev/nvidia2
crw-rw---- 1 root video 195, 3 Jan 4 23:19 /dev/nvidia3
crw-rw---- 1 root video 195, 255 Jan 4 23:19 /dev/nvidiactl
the above does not exist in /dev not any where
why did this not get created when emerge happend ?
can I create this manually ? |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Thu Feb 20, 2003 3:55 pm Post subject: Should this be happening ? |
|
|
Ok just another question.
It appears from my log file that X is loading all these drivers
a snippet from X log file
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV11 [GeForce2 MX] rev 178, Mem @ 0xec000000/24, 0xe0000000/27
List of video drivers:
nvidia
radeon
atimisc
r128
mga
glint
nv
tga
s3
s3virge
sis
rendition
neomagic
i740
tdfx
savage
cirrus
vmware
tseng
trident
chips
apm
fbdev
i128
nsc
ati
i810
imstt
newport
ark
cyrix
siliconmotion
vesa
vga
dummy
v4l
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4191
Module class: XFree86 Video Driver
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 6.4.18
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.1.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "glint"
(II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
(II) Module glint: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
(II) Module nv: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "tga"
(II) Loading /usr/X11R6/lib/modules/drivers/tga_drv.o
(II) Module tga: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "s3"
(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 0.3.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.8.3
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 0.6.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "rendition"
(II) Loading /usr/X11R6/lib/modules/drivers/rendition_drv.o
(II) Module rendition: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 4.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "neomagic"
(II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.o
(II) Module neomagic: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "i740"
(II) Loading /usr/X11R6/lib/modules/drivers/i740_drv.o
(II) Module i740: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "tdfx"
(II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.1.27
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "cirrus"
(II) Loading /usr/X11R6/lib/modules/drivers/cirrus_drv.o
(II) Module cirrus: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Is this right should it be loading all these drivers ?
is this what it is doing ?
if so why ?
could this be the cause of my problems, again on examination of log file, it doesn't say anywhere that it is loading glx
doh why is life so difficult, I notice scanning the forum, that it may not just be a nvidia thing I saw someone called bloke2k having same problems with ati card
I built my gentoo from a stage 3 1.4_rc2 GRP CDROM then synced and then -u world
then emerged X
then kde
then nvidia |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Thu Feb 20, 2003 8:59 pm Post subject: |
|
|
| I have just noticed that my video card is set to irq 11 and so is my via ide controller, could this be the cause of my problems ? |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Thu Feb 20, 2003 9:06 pm Post subject: |
|
|
I have also just noticed that /dev only has nvidia0 and nvidictl are in my /dev dir
no nvida 1,2 or 3
is this right ? |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Thu Feb 20, 2003 9:54 pm Post subject: |
|
|
Right a step closer I think ???
now I just get a load of scrambled gobledegook on the screen, but it still aint starting, I unplugged nic and sound card to get this far, which dnotes irq conflicts I think
now I have nothing apart from hd's cd's and graphics card injstalled
any ideas ? |
|
| Back to top |
|
|
Roguelazer
Veteran
Joined: 10 Feb 2003
Posts: 1233
Location: San Francisco, CA
|
| Posted: Thu Feb 20, 2003 10:04 pm Post subject: |
|
|
| Do you still have NvAGP set to 0 and all agpgart stuff unloaded? If not, make sure that it is... |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Thu Feb 20, 2003 10:28 pm Post subject: |
|
|
| Roguelazer wrote: | | Do you still have NvAGP set to 0 and all agpgart stuff unloaded? If not, make sure that it is... |
Hi yes I think so, I did enable agp in character devices in kernel and selcted via as this is my chipset
all I get now is ascii grahic characters on the screen
here is my new log file can you see anything wrong ?
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.2.99.4 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 20 January 2003
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20-gentoo-r1 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Feb 20 22:22:22 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80010044, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 0000,0824 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:11:0: chip 1106,3074 card 1106,3074 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00
(II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0110 card 10b0,0001 rev b2 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV11 [GeForce2 MX] rev 178, Mem @ 0xe0000000/24, 0xd8000000/27
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[1] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[2] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[3] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[4] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[5] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[6] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[1] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[2] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[3] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[4] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[5] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[6] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[7] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[11] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[12] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4191
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.4191
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA XFree86 Driver 1.0-4191 Mon Dec 9 11:51:41 PST 2002
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[7] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[11] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[12] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[7] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[14] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[15] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[17] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[18] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NvAGP" "0"
(**) NVIDIA(0): Use of AGP disabled per request
(--) NVIDIA(0): Linear framebuffer at 0xD8000000
(--) NVIDIA(0): MMIO registers at 0xE0000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce2 MX/MX 400
(--) NVIDIA(0): VideoRAM: 65536 kBytes
(--) NVIDIA(0): Detected TV Encoder: Chrontel 7007
(--) NVIDIA(0): Display 0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display 0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display 0: maximum pixel clock at 32 bpp: 300 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(WW) NVIDIA(0): Failure reading EDID parameters for display device 0.
(II) NVIDIA(0): Monitor0: Using hsync range of 30.00-96.00 kHz
(II) NVIDIA(0): Monitor0: Using vrefresh range of 47.00-150.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(WW) NVIDIA(0): Not using mode "1152x768":
(WW) NVIDIA(0): horizontal sync start (1178) not a multiple of 8
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for Display Device 0:
(**) NVIDIA(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(**) NVIDIA(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 133.5 MHz, 95.3 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "800x600": 101.2 MHz, 93.8 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
(**) NVIDIA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(==) NVIDIA(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.99.4, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
[1] 0 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[16] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[17] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[18] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): Setting mode "1280x1024"
also any idea what I can do to get rid of irq conflicts for nic and sound card ?
thanks almost there now |
|
| Back to top |
|
|
vod
Tux's lil' helper
Joined: 10 Jun 2002
Posts: 90
|
| Posted: Fri Feb 21, 2003 4:42 am Post subject: |
|
|
ok here's the deal.
I had exactly the same problems.
For me, it's related to using xfree 4.2.99.4
I went back to using 4.2.1-r2 and everything works.
here's the bug I filed:
https://bugs.gentoo.org/show_bug.cgi?id=15283 |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Fri Feb 21, 2003 9:17 am Post subject: |
|
|
| vod wrote: | ok here's the deal.
I had exactly the same problems.
For me, it's related to using xfree 4.2.99.4
I went back to using 4.2.1-r2 and everything works.
here's the bug I filed:
https://bugs.gentoo.org/show_bug.cgi?id=15283 |
AAAAARRRRRGGGGGGHHHH!!!!
You mean I have spent the best part of a week getting my gfx card to work and all the time it is a buggered XFree Doh!!
Yes reading you bug report, it is exactly the same as mine exactly!
out of interest what hardware are you running ?
How come there is no warning of this bug anywhere ?
Right I am going to have to download and merge the older Xfree tonight
I will give it a go
Thanks for explaining what my problem is
I new from reqading xfree docs and nvidia docs and Gentoo's own nvidia troubleshoot docs that I had done everything correctly
cheers |
|
| Back to top |
|
|
Yeric
Apprentice
Joined: 17 Feb 2003
Posts: 150
|
| Posted: Fri Feb 21, 2003 11:41 pm Post subject: |
|
|
| vod wrote: | ok here's the deal.
I had exactly the same problems.
For me, it's related to using xfree 4.2.99.4
I went back to using 4.2.1-r2 and everything works.
here's the bug I filed:
https://bugs.gentoo.org/show_bug.cgi?id=15283 |
Hi
Yes I can confirm reverting to 4.2.1-r2 of XFree solves the problem
I would advise anyone experiencing any problems with x and using 4.2.99.4 to switch to older Xfree it works
I have Nvidia Logo up and x started
I am getting 668 fps on glx gears
This is on a gainward Ge-Force 2 mx400
does anyone know if this is half decent ? |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
