| View previous topic :: View next topic |
| Author |
Message |
killer
n00b
Joined: 12 Dec 2003
Posts: 47
Location: Kladno
|
 Posted: Tue Aug 02, 2005 7:12 am Post subject: WHAT I DO WRONG ? IP config by SSID... PLEASE HELP |
 |
|
Hello all....
I have small problem. (i am beginner) My WiFi adapter (ipw2200) works fine, but i cant make working STATIC IP Config for connection "wap01" (this is name of one from 2 APs what i am using.) I try to configure it by Gentoo Linux Documentation -- Wireless Networking .
when i connect to my AP with SSID "linksys_SES_38221" everything works fine, i see in my ifconfig IP address given by DHCP, it is OK.
this AP uses TKIP and WEP
When i connect to my AP with SSID "wap01" (there is no securiy, no MAC filter, No keys, No encryption) i DONT see IP Adress asociated in my /etc/conf.d/net for this AP. If i look at iwconfig, i see that my adapter is associated to correct AP.
| Code: | lo no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11g ESSID:"wap01"
Mode:Managed Frequency:2.437 GHz Access Point: 00:13:10:15:03:CE
Bit Rate=54 Mb/s Tx-Power=20 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=97/100 Signal level=-28 dBm Noise level=-87 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:15 Missed beacon:3
sit0 no wireless extensions. |
then i must manually write at shell :
| Code: | ifconfig eth1 192.168.0.13 broadcast 192.168.0.63 netmask 255.255.255.192
route add default gw 192.168.0.1
|
and everything work. What i do wrong ? I think something i mispelled in /etc/conf.d/net in this lines, but what ?
| Code: |
config_wap01=( "192.168.0.13/26 brd 192.168.0.63" )
routes_wap01=( "default via 192.168.0.1" )
|
There are my /etc/conf.d/net
| Code: |
modules=( "wpa_supplicant" )
wpa_supplicant_eth1="-Dipw"
preferred_aps=( "001217BC8C6A" "wap01" "wrt01" )
config_wap01=( "192.168.0.13/26 brd 192.168.0.63" )
routes_wap01=( "default via 192.168.0.1" )
#iface_eth0="192.168.0.14 broadcast 192.168.0.63 netmask 255.255.255.192"
config_linksys_SES_38221=( "dhcp" )
|
There is /etc/wpa_supplicant.conf
| Code: |
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
#eapol_version=1
#ap_scan=1
#fast_reauth=1
network={
ssid="linksys_SES_38221"
proto=WPA
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk=f63bce57d00ee7375b5cc2810de812bf79208b9a695d9bcdaf7fde4fbcf626e6
priority=2
}
network={
ssid="wap01"
key_mgmt=NONE
} |
The question is: How to correctly write in /etc/conf.d/net lines for correct IP address ???
What manual i may read ??? My goal is have configured wireless adapter by SSID to what i am connected (like in Gentoo Documentation ) |
|
| Back to top |
|
 |
UberLord
Retired Dev
Joined: 18 Sep 2003
Posts: 6835
Location: Blighty
|
| Posted: Tue Aug 02, 2005 7:31 am Post subject: |
|
|
| Try using baselayout-1.12.0_pre3-r2 and the latest wpa_supplicant-0.4.x |
|
| Back to top |
|
|
killer
n00b
Joined: 12 Dec 2003
Posts: 47
Location: Kladno
|
| Posted: Sun Sep 11, 2005 10:29 am Post subject: |
|
|
| UberLord wrote: | | Try using baselayout-1.12.0_pre3-r2 and the latest wpa_supplicant-0.4.x |
This will not work....
But now... EVERYTHING WORKS with current versions:
baselayout 1.11.13-r1
wpa_supplicant 0.3.9-r1
Have nice day...
Killer |
|
| Back to top |
|
|
|
Networking & Security
