View previous topic :: View next topic |
Author |
Message |
mprzybyla n00b
Joined: 07 Aug 2005 Posts: 15
|
Posted: Sun Aug 07, 2005 6:16 pm Post subject: USB DVDRW burnes at 0.5x speed |
|
|
Hi ;)
I have a strange problem: my external DVD burner (CIBOX 1016) works ok, excepting dvd recording speed. See the log:
Code: | System
-----------------------
K3b Version: 0.12
KDE Version: 3.4.1
QT Version: 3.3.4
Kernel: 2.6.12-gentoo-r4
Devices
-----------------------
DVDRW USB 16X A187 (/dev/sr0, /dev/sg0) at /mnt/dvdrom [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R dwuwarstwowa] [DVD-ROM; DVD-R sekwencyjna; DVD-RW w trybie ograniczonego zastępowania; DVD-RW sekwencyjny; DVD+RW; DVD+R; DVD+R dwuwarstwowa; CD-ROM; CD-R; CD-RW] [Sesja naraz (SAO); TAO; RAW; SAO/R96P; SAO/R96R; Surowe/R16; Surowe/R96P; Surowe/R96R; Ograniczone zastępowanie]
LITE-ON LTR-48246S SS0B (/dev/hdd, ) at /mnt/cdrom [CD-R; CD-RW; CD-ROM] [CD-ROM; CD-R; CD-RW] [Sesja naraz (SAO); TAO; RAW; SAO/R96P; SAO/R96R; Surowe/R16; Surowe/R96P; Surowe/R96R]
K3b
-----------------------
Size of filesystem calculated: 2238183
Used versions
-----------------------
mkisofs: 2.1
growisofs: 5.21
growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'
/dev/sr0: "Current Write Speed" is 8.2x1385KBps.
0/4583798784 ( 0.0%) @0x, remaining ??:??
0/4583798784 ( 0.0%) @0x, remaining ??:??
0/4583798784 ( 0.0%) @0x, remaining ??:??
65536/4583798784 ( 0.0%) @0.0x, remaining 18651:15
2392064/4583798784 ( 0.1%) @0.5x, remaining 638:25
5079040/4583798784 ( 0.1%) @0.6x, remaining 345:34
7438336/4583798784 ( 0.2%) @0.5x, remaining 266:36
9764864/4583798784 ( 0.2%) @0.5x, remaining 234:12
12091392/4583798784 ( 0.3%) @0.5x, remaining 207:57
14385152/4583798784 ( 0.3%) @0.5x, remaining 190:35
16809984/4583798784 ( 0.4%) @0.5x, remaining 181:07
19136512/4583798784 ( 0.4%) @0.5x, remaining 170:56
21692416/4583798784 ( 0.5%) @0.5x, remaining 161:14
24248320/4583798784 ( 0.5%) @0.5x, remaining 156:41
and so on...
|
So a 4.3G disk takes it 2h or even more.
When it comes to reading CD/DVD's, it works ok (full speed).
Any idea what's wrong?
thanks,
Michal |
|
Back to top |
|
|
Tlaloc Guru
Joined: 21 Feb 2005 Posts: 451 Location: Europe - Alps - Tyrol
|
Posted: Mon Aug 08, 2005 7:23 am Post subject: |
|
|
What is the dmesg output when you attach the drive? |
|
Back to top |
|
|
mprzybyla n00b
Joined: 07 Aug 2005 Posts: 15
|
Posted: Mon Aug 08, 2005 8:20 am Post subject: |
|
|
Code: | usb 1-5: new high speed USB device using ehci_hcd and address 2
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Vendor: DVDRW Model: USB 16X Rev: A187
Type: CD-ROM ANSI SCSI revision: 00
usb-storage: device scan complete
sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 |
|
|
Back to top |
|
|
Tlaloc Guru
Joined: 21 Feb 2005 Posts: 451 Location: Europe - Alps - Tyrol
|
Posted: Mon Aug 08, 2005 9:51 am Post subject: |
|
|
dmesg output looks good and I can't help you much further. But I recall that here in the forums there are some posts that describe and deal with that problem.
Bye, Valentin. |
|
Back to top |
|
|
mprzybyla n00b
Joined: 07 Aug 2005 Posts: 15
|
Posted: Mon Aug 08, 2005 12:30 pm Post subject: |
|
|
Thanks
I'll look for it.
regards
Michal |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|