| View previous topic :: View next topic |
| Author |
Message |
hollovoid7
Tux's lil' helper
Joined: 04 May 2005
Posts: 126
Location: Phelps NY
|
 Posted: Fri Aug 19, 2005 1:28 pm Post subject: Cdrecord not burning/not alowing atapi (solved) |
 |
|
the other day, I upgraded udev, and baselayout (im using ~x86) and now I get an error whenever I try to burn with k3b, or nautilus burn ..
--------------------------------------------------------------------------
cdrecord: Operation not permitted. Cannot send SCSI cmd via ioctl
cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
SCSI buffer size: 64512
Linux sg driver version: 3.5.27
Warning: Open by 'devname' is unintentional and not supported.
scsibus: -2 target: -2 lun: -2
devname: '/dev/hdc'
scsidev: '/dev/hdc'
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: Warning: Running on Linux-2.6.12-love1
cdrecord: Continuing in 5 seconds...
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Asuming -tao mode.
cdrecord: No write mode specified.
---------------------------------------------------
now,, I can burn using NeroLinux, so I know my drive is not b0rked, and it worked before the udev and baselayout update. ive been running the same kernel 2.6.12-love1 for a while now with absolutely no scsi-emulation/scsi options period, so I do not know why cdrecord is insisting on using it when the support is not even there. I dont use cdrecord in the terminal, so I dont think I can pass arguments to k3b or nautilus to change this (or am I wrong?) my permissions seem fine, I am in cdrom, cdrw, and disk groups, plus cdrecord and cdrdao are in root,cdrw groups (was in cdrom group but I changed that to see if it was the problem, no change in outcome) any suggestions would be greatly appreciated, as I have no clue where to even start on this.
_________________
MAO
Last edited by hollovoid7 on Sat Aug 20, 2005 9:58 pm; edited 1 time in total |
|
| Back to top |
|
 |
Ma3oxuct
Guru
Joined: 18 Apr 2003
Posts: 523
|
| Posted: Fri Aug 19, 2005 4:28 pm Post subject: |
|
|
WTF, same problem here 
| Code: | System
-----------------------
K3b Version: 0.12
KDE Version: 3.4.2
QT Version: 3.3.4
Kernel: 2.6.12-gentoo-r9
Devices
-----------------------
TOSHIBA CDW/DVD SD-R1612 TB02 (/dev/hdc, ) at /mnt/dvd [CD-R; CD-RW; CD-ROM; DVD-ROM] [DVD-ROM; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]
_NEC DVD_RW ND-3540A 1.01 (/dev/hda, ) at /mnt/dvdr [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-R Dual Layer Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96R; RAW/R96R; Restricted Overwrite]
Used versions
-----------------------
cdrecord: 2.1.1a03
cdrecord
-----------------------
/usr/bin/cdrecord: Warning: Running on Linux-2.6.12-gentoo-r9
/usr/bin/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
/usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hda'
devname: '/dev/hda'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
/usr/bin/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD.
/usr/bin/cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/
Cdrecord-Clone 2.01.01a03 (i686-pc-linux-gnu) Copyright (C) 1995-2005 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-3540A '
Revision : '1.01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1343488 = 1312 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. Cannot send SCSI cmd via ioctl
Track 01: data 59 MB
Total size: 68 MB (06:44.36) = 30327 sectors
Lout start: 68 MB (06:46/27) = 30327 sectors
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hda speed=48 -dao driveropts=burnfree -eject -data /in/install-x86-minimal-2005.1.iso
|
I tried in both burners btw. Recompiling cdrdao now.
Workaround: Burn as root. Looks like a permissions problem
What version of udev and baselayout did you upgrade to hollovoid7?
I have udev 067 and baselayout 1.12.0_pre5.
Ok, this can't be a problem with udev or baselayout. Its cdrecord (cdrtools). I upgraded from cdrtools-2.01.01_alpha01-r2 to cdrtools-2.01.01_alpha03 and the problem started to occur today. I am sure that you might have done the same. Check your /var/log/portage/.
HA! There is a reopened bug @ bugs.gentoo.org: https://bugs.gentoo.org/show_bug.cgi?id=99657 |
|
| Back to top |
|
|
hollovoid7
Tux's lil' helper
Joined: 04 May 2005
Posts: 126
Location: Phelps NY
|
| Posted: Fri Aug 19, 2005 7:23 pm Post subject: |
|
|
actually now that you mention it, I did have that upgrade recently, silly question but how do you downgrade to app-cdr/cdrtools-2.01.01_alpha01-r2, ive tried = indicator in front of it, but it still complains and wont install it. thnx for info./
_________________
MAO |
|
| Back to top |
|
|
rotorouter
n00b
Joined: 09 Jul 2005
Posts: 4
Location: Chapel Hill, NC
|
| Posted: Sat Aug 20, 2005 3:23 am Post subject: Prob affects generic kernel too |
|
|
I have the same problem using a generic kernel (2.6.12.5) on AMD64, so might not even be a Gentoo problem.
$ emerge --info
Portage 2.0.51.22-r2 (default-linux/amd64/2005.0, gcc-3.4.4, glibc-2.3.5-r1, 2.6.12.5-20050818C x86_64)
=================================================================
System uname: 2.6.12.5-20050818C x86_64 AMD Athlon(tm) 64 Processor 3000+
Gentoo Base System version 1.6.13
<snip> |
|
| Back to top |
|
|
Ma3oxuct
Guru
Joined: 18 Apr 2003
Posts: 523
|
| Posted: Sat Aug 20, 2005 4:25 am Post subject: |
|
|
| hollovoid7 wrote: | | actually now that you mention it, I did have that upgrade recently, silly question but how do you downgrade to app-cdr/cdrtools-2.01.01_alpha01-r2, ive tried = indicator in front of it, but it still complains and wont install it. thnx for info./ |
Simple: | Code: | | emerge =app-cdr/cdrtools-2.01.01_alpha01-r2 |
|
|
| Back to top |
|
|
Matteo Azzali
Retired Dev
Joined: 23 Sep 2004
Posts: 1133
|
| Posted: Sat Aug 20, 2005 2:10 pm Post subject: |
|
|
Hum, best way should be:
| Code: |
echo "=app-cdr/cdrtools-2.01.01_alpha03" >> /etc/portage/package.mask
|
then just
this way system will not try to re-emerge anytime you do an emerge -auDN world.
_________________
Every day a new distro comes to birth. Every day a distro "eats" another.
If you're born distro, no matter what, start to run.
---- http://www.linuxprinting.org/ ---- http://tuxmobil.org/ |
|
| Back to top |
|
|
hollovoid7
Tux's lil' helper
Joined: 04 May 2005
Posts: 126
Location: Phelps NY
|
| Posted: Sat Aug 20, 2005 10:00 pm Post subject: |
|
|
Thanks for the info guys downgrading worked like a charm. 
_________________
MAO |
|
| Back to top |
|
|
MetalGod
Bodhisattva
Joined: 10 Mar 2003
Posts: 816
Location: Portugal
|
| Posted: Sat Aug 20, 2005 10:25 pm Post subject: |
|
|
i'm trying to get a good fix for that.
looks like cdrecord isn't suidroot if you try to burn logged as root it should work perfect.
_________________
ex: Gentoo Linux Developer: amd64 media-optical sound gnome
ex: Portuguese Moderator
------------------------------------------------------------------------------
God Doesn't Play Dice |
|
| Back to top |
|
|
MetalGod
Bodhisattva
Joined: 10 Mar 2003
Posts: 816
Location: Portugal
|
| Posted: Sun Aug 21, 2005 2:40 am Post subject: |
|
|
Ok i commited a new revision that fix all this stuff. You can start using cdrtools-2.01.01_alpha03 again 
_________________
ex: Gentoo Linux Developer: amd64 media-optical sound gnome
ex: Portuguese Moderator
------------------------------------------------------------------------------
God Doesn't Play Dice |
|
| Back to top |
|
|
Ma3oxuct
Guru
Joined: 18 Apr 2003
Posts: 523
|
| Posted: Sun Aug 21, 2005 2:43 am Post subject: |
|
|
| Thanks MetalGod . |
|
| Back to top |
|
|
MetalGod
Bodhisattva
Joined: 10 Mar 2003
Posts: 816
Location: Portugal
|
| Posted: Sun Aug 21, 2005 3:26 am Post subject: |
|
|
If anyone got more problems with this please report a bug assigned to media-optical.
_________________
ex: Gentoo Linux Developer: amd64 media-optical sound gnome
ex: Portuguese Moderator
------------------------------------------------------------------------------
God Doesn't Play Dice |
|
| Back to top |
|
|
hollovoid7
Tux's lil' helper
Joined: 04 May 2005
Posts: 126
Location: Phelps NY
|
| Posted: Sun Aug 21, 2005 3:41 am Post subject: |
|
|
thanks alot metalgod, good fix
_________________
MAO |
|
| Back to top |
|
|
|
Kernel & Hardware
