View previous topic :: View next topic |
Author |
Message |
Xav n00b
Joined: 20 Aug 2004 Posts: 6
|
Posted: Mon Aug 22, 2005 4:28 pm Post subject: aty128fb on PBookG4/400 |
|
|
Hi all!
I've got strange problem booting Gentoo 2005.0 in my PowerBook G4/400.
Boot process gets to this point:
Code: |
...
* PCI: Enabling device 0000 : 00 : 00 : 10.0 (0086-> 0087)
* aty128fb: Invalid ROM signature 0 Should be 0xaa55
* aty128fb: Bios not located, guessing timings
* aty128fb: Rage128 LF M3 AGP [chip rev 0x0] 8M 128-bit SDR SGRAM (1:1)
* Console: switching to colour frame buffer device 144x48
* Registered "ati" backlight controller, level: 15/15
* fbo: ATY Rage128 frame buffer device on Rage128 LF M3 AGP
|
...and freezes. After 5-6 restarts it goes through this point smooth (!?) and boots ok.
Here's lspci
Code: |
...
bash-2.05b# lspci -v
0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
Flags: bus master, 66Mhz, medium devsel, latency 16
Capabilities: [80] AGP version 1.0
0000:00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage Mobility M3 AGP 2x
Flags: bus master, stepping, 66Mhz, medium devsel, latency 255, IRQ 48
Memory at b4000000 (32-bit, prefetchable)
I/O ports at 802400 [size=256]
Memory at b0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] AGP version 2.0
Capabilities: [5c] Power Management version 2
...
|
I use 2.6.10 kernel with this config (just graphic part):
Code: |
#
# Graphics support
#
....
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
# CONFIG_FB_ATY_XL_INIT is not set
CONFIG_FB_ATY_GX=y
....
|
Code: |
bash-2.05b# fbset -i
mode "1152x768-55"
# D: 64.994 MHz, H: 44.154 kHz, V: 54.781 Hz
geometry 1152 768 1152 768 8
timings 15386 158 26 29 3 136 6
hsync high
vsync high
rgba 8/0,8/0,8/0,0/0
endmode
Frame buffer device information:
Name : ATY Rage128
Address : 0xb4000000
Size : 8388608
Type : PACKED PIXELS
Visual : PSEUDOCOLOR
XPanStep : 8
YPanStep : 1
YWrapStep : 0
LineLength : 1152
MMIO Address: 0xb0000000
MMIO Size : 8192
Accelerator : Unknown (32)
|
tnx in advance. _________________ Regards,
Xav.
'May the source be with you...' |
|
Back to top |
|
|
btlee Apprentice
Joined: 03 Sep 2004 Posts: 168 Location: San Francisco
|
Posted: Tue Aug 23, 2005 12:18 am Post subject: |
|
|
Your video controller seems to be ati rage 128.
Why did you include radeon driver?
Drop it and then try it.
Cheers _________________ AMD64 3200+, 2G/160G+250G
DELL 700m, 1.8GHz, 2G/80G
iBook G3-500Mhz, 640M/100G |
|
Back to top |
|
|
Xav n00b
Joined: 20 Aug 2004 Posts: 6
|
Posted: Tue Aug 23, 2005 8:55 am Post subject: |
|
|
It works now! They've been in conflict.
Tnx. _________________ Regards,
Xav.
'May the source be with you...' |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|