| View previous topic :: View next topic |
| Author |
Message |
blaksaga
Guru
Joined: 19 May 2003
Posts: 461
Location: Omaha, NE, USA
|
 Posted: Tue Aug 23, 2005 3:59 pm Post subject: CD/DVD Problems |
 |
|
I have problems getting my dvd player to eject and cdrecord will not burn things saying /usr/bin/cdrecord: Operation not permitted. Cannot send SCSI cmd via ioctl. My dmesg shows things all fucked up.
| Code: | Linux version 2.6.12-gentoo-r6 (root@alf) (gcc version 3.3.5-20050130 (Gentoo Linux 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #4 SMP Wed Jul 20 18:26:21 CDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131068
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126972 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f5f50
ACPI: RSDT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc000
ACPI: FADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc0b2
ACPI: BOOT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc030
ACPI: MADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x1fffc058
ACPI: DSDT (v001 ASUS A7V8X-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda3
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1666.762 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514680k/524272k available (2410k kernel code, 8992k reserved, 982k data, 212k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3284.99 BogoMIPS (lpj=1642496)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: AMD Athlon(TM) XP 2000+ stepping 00
Total of 1 processors activated (3284.99 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 01
groups: 01
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xf1990, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:01: ioport range 0xe800-0xe81f has been reserved
pnp: 00:0c: ioport range 0x290-0x297 has been reserved
pnp: 00:0c: ioport range 0x370-0x375 has been reserved
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
inotify device minor=63
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
ACPI: Power Button (FF) [PWRF]
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
8139too Fast Ethernet driver 0.9.27
PCI: Enabling device 0000:00:13.0 (0004 -> 0007)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xe0808000, 00:50:ba:c8:b4:5f, IRQ 18
eth0: Identified 8139 chip type 'RTL-8139C'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: IC35L080AVVA07-0, ATA DISK drive
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TDK CDRW401240B, ATAPI CD/DVD-ROM drive
hdd: LITE-ON DVD SOHD-16P9S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 >
hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 254kB Cache, UDMA(33)
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 220 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: replayed 22 transactions in 3 seconds
ReiserFS: hda3: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 212k freed
Adding 610428k swap on /dev/hda5. Priority:-1 extents:1
ReiserFS: hda3: Removing [5656694 6158544 0x0 SD]..done
ReiserFS: hda3: Removing [5399765 5399769 0x0 SD]..done
ReiserFS: hda3: Removing [5399765 5399768 0x0 SD]..done
ReiserFS: hda3: Removing [5399765 5399767 0x0 SD]..done
ReiserFS: hda3: Removing [5399765 5399766 0x0 SD]..done
ReiserFS: hda3: Removing [5399761 5399765 0x0 SD]..done
ReiserFS: hda3: Removing [2236899 5399761 0x0 SD]..done
ReiserFS: hda3: Removing [110131 5399241 0x0 SD]..done
ReiserFS: hda3: Removing [110131 5399232 0x0 SD]..done
ReiserFS: hda3: Removing [5091850 5092550 0x0 SD]..done
ReiserFS: hda3: Removing [110131 5092022 0x0 SD]..done
ReiserFS: hda3: Removing [380679 2236899 0x0 SD]..done
ReiserFS: hda3: There were 12 uncompleted unlinks/truncates. Completed
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 5
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 5
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 5
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
usb 1-1: new low speed USB device using uhci_hcd and address 2
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7667 Fri Jun 17 07:01:04 PDT 2005
Initializing USB Mass Storage driver...
usb 1-2: new low speed USB device using uhci_hcd and address 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-1
input: USB HID v1.00 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:10.0-2
input: USB HID v1.00 Mouse [NOVATEK USB Keyboard] on usb-0000:00:10.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Via IRQ fixup for 0000:00:11.5, from 0 to 6
PCI: Setting latency timer of device 0000:00:11.5 to 64
codec_read: codec 0 is not valid [0x107e5370]
codec_read: codec 0 is not valid [0x107e5370]
codec_read: codec 0 is not valid [0x107e5370]
codec_read: codec 0 is not valid [0x107e5370]
eth0: link up, 100Mbps, full-duplex, lpa 0x43E1
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258776
Buffer I/O error on device hdd, logical block 1782347
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258784
Buffer I/O error on device hdd, logical block 1782348
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258792
Buffer I/O error on device hdd, logical block 1782349
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258800
Buffer I/O error on device hdd, logical block 1782350
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258808
Buffer I/O error on device hdd, logical block 1782351
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258816
Buffer I/O error on device hdd, logical block 1782352
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258824
Buffer I/O error on device hdd, logical block 1782353
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258832
Buffer I/O error on device hdd, logical block 1782354
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258840
Buffer I/O error on device hdd, logical block 1782355
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258848
Buffer I/O error on device hdd, logical block 1782356
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258856
Buffer I/O error on device hdd, logical block 1782357
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258864
Buffer I/O error on device hdd, logical block 1782358
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258872
Buffer I/O error on device hdd, logical block 1782359
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258880
Buffer I/O error on device hdd, logical block 1782360
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258888
Buffer I/O error on device hdd, logical block 1782361
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258896
Buffer I/O error on device hdd, logical block 1782362
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258904
Buffer I/O error on device hdd, logical block 1782363
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258912
Buffer I/O error on device hdd, logical block 1782364
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
hdd: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdd: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
scsi: unknown opcode 0x01
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO
attempt to access beyond end of device
hdc: rw=0, want=68, limit=4
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO
program eject is using a deprecated SCSI ioctl, please convert it to SG_IO |
But I can't make heads or tails of this and don't know how to fix it. Any suggestions?
_________________
[ blaksaga.com ] |
|
| Back to top |
|
 |
fangorn
Veteran
Joined: 31 Jul 2004
Posts: 1886
|
| Posted: Wed Aug 24, 2005 7:52 am Post subject: |
|
|
| Quote: |
hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 254kB Cache, UDMA(33)
...
Buffer I/O error on device hdd, logical block 1782358
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258872
|
See??
you try writing on a ATAPI 48X DVD-ROM drive  |
|
| Back to top |
|
|
blaksaga
Guru
Joined: 19 May 2003
Posts: 461
Location: Omaha, NE, USA
|
| Posted: Wed Aug 24, 2005 12:41 pm Post subject: |
|
|
| fangorn wrote: | | Quote: |
hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 254kB Cache, UDMA(33)
...
Buffer I/O error on device hdd, logical block 1782358
hdd: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
hdd: media error (bad sector): error=0x30 { LastFailedSense=0x03 }
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 14258872
|
See??
you try writing on a ATAPI 48X DVD-ROM drive |
Damn, you're right. Must be a bug in my burning software. Anyway I managed to screw with it and get it to work.  Thanks for bringing that to my attention.
_________________
[ blaksaga.com ] |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
