| View previous topic :: View next topic |
| Author |
Message |
netfab
Veteran
Joined: 03 Mar 2005
Posts: 1902
Location: 127.0.0.1
|
 Posted: Sat Sep 03, 2005 12:31 pm Post subject: [CPU] hardware reports non fatal incident (resolu) |
 |
|
Salut,
Bon, autant que vous le sachiez tout de suite, je ne me fais pas beaucoup d'illusions : si je ne trouve pas de solution, ce n'est pas çà qui va m'empêcher de dormir 
Depuis que je suis passé à gentoo (et linux en général), mon /var/log/messages est constamment pollué par ceci :
| Quote: |
Aug 28 20:00:58 monordi MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Aug 28 20:00:58 monordi Bank 0: cc00008820040189
Aug 28 20:00:58 monordi MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Aug 28 20:00:58 monordi Bank 1: c000000000000145
|
Et ce, toutes les 2 à 7 minutes, c'est assez variable.
Evidemment, j'ai effectué pas mal de recherches à ce sujet, sans grands résultats.
Je n'ai aucun problème particulier, si ce n'est que depuis environ 6 mois, je suis obligé de couper l'interrupteur de l'alimentation sans quoi le PC s'allume tout seul à 3H du matin pétantes.
A ce sujet, pas la peine de me dire de regarder dans le bios à propos de l'option wake up on LAN ou wake up à une heure précise, c'est déjà fait depuis longtemps, tout est désactivé (et n'a d'ailleurs jamais été activé).
J'ai aussi flashé le bios à cette occasion, fait un reset de la carte mère, rien n'y fait.
Même en débranchant le câble RJ45 du réseau, le PC s'allume tout seul si je ne coupe pas l'alimentation.
Bref, à votre avis :
- Ces 2 phénomènes peuvent t'ils être liés ?
- Avez-vous une idée lumineuse (on peut toujours rêver
 ) ?
- Y'a t'il possibilité de ne pas loguer ces évènements concernant le CPU ?
Je le répète : mis à part le fait que je doive couper l'interrupteur chaque soir, je n'ai aucun problème.
Le cpu :
| Quote: |
$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.40GHz
stepping : 9
cpu MHz : 2400.859
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
bogomips : 4734.97
|
Voici un dmesg, pris juste après le boot, dans le cas où vous verriez quelque chose qui cloche.
Merci.
| Quote: |
Linux version 2.6.12-gentoo-r9 (root@monordi) (version gcc 3.3.5-20050130 (Gentoo Linux 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 SMP Thu Aug 25 17:33:25 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
found SMP MP-table at 000fc0f0
On node 0 totalpages: 229376
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa320
ACPI: RSDT (v001 AMIINT INTEL865 0x00000010 MSFT 0x00000097) @ 0x3fff0000
ACPI: FADT (v001 AMIINT INTEL865 0x00000011 MSFT 0x00000097) @ 0x3fff0030
ACPI: MADT (v001 AMIINT INTEL865 0x00000009 MSFT 0x00000097) @ 0x3fff00c0
ACPI: DSDT (v001 INTEL I865G 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Built 1 zonelists
Kernel command line: root=/dev/hdb6 hda=ide-cd hdc=ide-cd
ide_setup: hda=ide-cd
ide_setup: hdc=ide-cd
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 2400.859 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 904016k/917504k available (3081k kernel code, 13040k reserved, 1191k data, 224k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4734.97 BogoMIPS (lpj=2367488)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Total of 1 processors activated (4734.97 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Brought up 1 CPUs
CPU0 attaching sched-domain:
domain 0: span 01
groups: 01
domain 1: span 01
groups: 01
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1125737547.265:0): initialized
inotify device minor=63
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.22 [Flags: R/W DEBUG].
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 128M @ 0xf0000000
[drm] Initialized drm 1.0.0 20040925
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU1] (supports 8 throttling states)
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
input: PC Speaker
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
e100: eth0: e100_probe: addr 0xfeaff000, irq 20, MAC addr 00:0C:76:3A:CB:0C
PPP generic driver version 2.4.2
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: HL-DT-ST GCE-8160B, ATAPI CD/DVD-ROM drive
hdb: WDC WD200BB-32CLB0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
hdd: probing with STATUS(0x50) instead of ALTSTATUS(0x00)
hdd: IC35L060AVV207-0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
ide2: I/O resource 0x3EE-0x3EE not free.
ide2: ports already in use, skipping probe
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hdb: max request size: 128KiB
hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
hdb: cache flushes not supported
/dev/ide/host0/bus0/target1/lun0: p1 p2 < p5 p6 p7 >
hdd: max request size: 1024KiB
hdd: Host Protected Area detected.
current capacity is 120103200 sectors (61492 MB)
native capacity is 44672477602080 sectors (22872308532 MB)
hdd: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: task_no_data_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: 0x37
hdd: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
hdd: cache flushes supported
/dev/ide/host0/bus1/target1/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 p12 >
hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
libata version 1.11 loaded.
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugs is not available
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb 2-2: new full speed USB device using uhci_hcd and address 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 3-2: new low speed USB device using uhci_hcd and address 2
input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
drivers/usb/media/ov511.c: USB OV511+ video device found
drivers/usb/media/ov511.c: model: Creative Labs WebCam 3
drivers/usb/media/ov511.c: Sensor is an OV7620AE
drivers/usb/media/ov511.c: Enabling 511+/7620AE workaround
drivers/usb/media/ov511.c: Device at usb-0000:00:1d.0-2 registered to minor 0
usbcore: registered new driver ov511
drivers/usb/media/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC).
ALSA device list:
No soundcards found.
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
USB1 USB2 USB3 USB4 EHCI CSAB ICHB PS2K MC9
ACPI: (supports S0 S1 S4 S5)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 224k freed
kjournald starting. Commit interval 5 seconds
Adding 530104k swap on /dev/hdd9. Priority:-1 extents:1
EXT3 FS on hdb6, internal journal
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7676 Fri Jul 29 12:58:54 PDT 2005
ip_conntrack version 2.1 (7168 buckets, 57344 max) - 220 bytes per conntrack
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd11, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS volume version 3.1.
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49700 usecs
intel8x0: clocking to 48000
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ip_tables: (C) 2000-2002 Netfilter core team
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 0: cc00000120040189
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 1: c000000000000145
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 0: cc00000320040189
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 1: c000000000000145
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 0: cc00000520040189
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 1: c000000000000135
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 0: cc00000720040189
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 1: 8000000000000145
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 0: cc00000920040189
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 1: c000000000000135
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 0: cc00000b20040189
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 1: c000000000000145
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 0: cc00000d20040189
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0.
Bank 1: c000000000000145
|
Last edited by netfab on Wed Jun 14, 2006 3:41 pm; edited 1 time in total |
|
| Back to top |
|
 |
anigel
Bodhisattva
Joined: 14 Apr 2003
Posts: 1894
Location: Un petit bled pas loin de Limoges ;-)
|
| Posted: Sat Sep 03, 2005 12:42 pm Post subject: |
|
|
Salut,
Ce message est causé par une option du kernel, c'est l'une des 2 suivantes (me rappele plus laquelle).
| Code: | Processor type and features --->
[...]
[*] Machine Check Exception
< > Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4
[ ] check for P4 thermal throttling interrupt. |
Il me semble qu'il s'agit de la première option. Toutefois, enlever cette option fera disparaître le message, mais pas le problème. Si j'interprète bien les messages, tu as un problème avec une des banques de mémoire de ta machine. As-tu lancé un memtest pour vérifier l'état de tes barettes ? Une latence un peu trop agressive dans le BIOS peut aussi causer ce genre de trucs...
Par contre, pour ton problème de PC qui se réveille seul, là je ne vois guère que l'exorcisme...
Bon courage
_________________
Il y a 10 sortes d'individus en ce bas-monde : ceux qui causent binaire, et les autres. |
|
| Back to top |
|
|
naerex
Guru
Joined: 02 Apr 2005
Posts: 316
Location: Paris, France
|
| Posted: Sat Sep 03, 2005 1:21 pm Post subject: |
|
|
Anigel a raison et je rajouterai ceci :
| Quote: | Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available. |
visiblement tu as plus d' 1Go de ram et tu n'as pas activé le support dans le kernel :
Dans processor type and features :
| Code: |
High Memory Support (4GB) --->
[*] Allocate 3rd-level pagetables from highmem
|
|
|
| Back to top |
|
|
netfab
Veteran
Joined: 03 Mar 2005
Posts: 1902
Location: 127.0.0.1
|
| Posted: Sat Sep 03, 2005 2:53 pm Post subject: |
|
|
| anigel wrote: | Salut,
Ce message est causé par une option du kernel, c'est l'une des 2 suivantes (me rappele plus laquelle).
| Code: | Processor type and features --->
[...]
[*] Machine Check Exception
< > Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4
[ ] check for P4 thermal throttling interrupt. |
Il me semble qu'il s'agit de la première option. Toutefois, enlever cette option fera disparaître le message, mais pas le problème. Si j'interprète bien les messages, tu as un problème avec une des banques de mémoire de ta machine. As-tu lancé un memtest pour vérifier l'état de tes barettes ? Une latence un peu trop agressive dans le BIOS peut aussi causer ce genre de trucs...
Par contre, pour ton problème de PC qui se réveille seul, là je ne vois guère que l'exorcisme...
Bon courage |
Je n'ai jamais vu cette option dans le kernel (jamais fait attention), je vais y jeter un oeil.
Pour le memtest, je viens de le faire : 1h30 de tests, 3 pass, 0 erreurs.
Au niveau du bios tout est d'origine, je ne m'amuse pas avec ce genre de choses
| naerex wrote: | Anigel a raison et je rajouterai ceci :
| Quote: | Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available. |
visiblement tu as plus d' 1Go de ram et tu n'as pas activé le support dans le kernel :
Dans processor type and features :
| Code: |
High Memory Support (4GB) --->
[*] Allocate 3rd-level pagetables from highmem
|
|
Oui, c'est vrai, je ne l'ai jamais fait, je suivais jusqu'à présent les conseils de ce howto.
Mais je vais essayer et voir si çà fait une différence notable, si çà se trouve çà réglera peut-être le problème |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
