| View previous topic :: View next topic |
| Author |
Message |
KLG
Tux's lil' helper
Joined: 13 Jul 2005
Posts: 90
Location: @York, UK
|
 Posted: Wed Sep 07, 2005 4:41 pm Post subject: gnome won't start... [solved] |
 |
|
Hello this summer I installed gentoo from 2005.0 on my FJS Amilo M3438G with no major proplems (no sound /apm support).
Anyway i was forced to format both Windows XP an Gentoo disks (SATA) and here I go again. This time i used the 2005.1 CD. I made 2 attempts
1st attempt
after 1st reboot emerge --sync, and emerge --the whole universe
after i emerged gnome, and copied my video settings from my previous xorg.conf,, I set startx to run gnome. I crossed my fingers and prayed that it would load
.... but god at that time wasn't listening
I see nvidia splash image at 1440x900 and then it starts loading gnome.. It should have been loading components.. but there it just hangs. Mouse works, i can scroll.
After searching for 2 days, i couldn't find anything, whatever i did destroyed something else.... i was desperate.... and when i am desperate i get drunk. And then i format everything.
I suspected that when i emerged world something went wrong, i mean 100++ system files updated are way to much.
So this time i will use the 2005.1 binary package CD an won't emerge everything
2nd attempt
Everything went OK
after finishing the installation, emerged xorg-x11 gnome xscreensaver from CD
copied my PREVIOUS xorg.conf and started gnome
i was very happy to see that it worked!
ok lets emerge now everything but ten at a time so i can find where the problem lies.
first i copied my previous make.conf file so that compile will use the USE flags
then i started againn gnome BUT i had the same problems....
is something wrong with my make.conf? i used the old make.conf i had backuped but nothing happened
i didn't compile anything, just copied it an run gnome
Here is var.0.log
| Code: |
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11-gentoo-r11 i686 [ELF]
Current Operating System: Linux thanasis 2.6.12-gentoo-r6 #1 Wed Sep 7 16:39:12 Local time zone must be set--see zic manua i686
Build Date: 28 July 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 7 18:55:51 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "card0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/75dpi/,/usr/share/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2590 card 1734,107c rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2591 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1b:0: chip 8086,2668 card 1734,107c rev 04 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,2660 card 0000,0000 rev 04 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2658 card 1734,107c rev 04 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2659 card 1734,107c rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,265a card 1734,107c rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,265b card 1734,107c rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,265c card 1734,107c rev 04 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2641 card 1734,107c rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,266f card 1734,107c rev 04 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,266a card 1734,107c rev 04 class 0c,05,00 hdr 00
(II) PCI: 01:03:0: chip 8086,4220 card 8086,2702 rev 05 class 02,80,00 hdr 00
(II) PCI: 01:04:0: chip 104c,8023 card 1734,107c rev 00 class 0c,00,10 hdr 00
(II) PCI: 01:05:0: chip 10ec,8169 card 1734,107c rev 10 class 02,00,00 hdr 00
(II) PCI: 01:07:0: chip 1106,3249 card 1734,107c rev 50 class 01,04,00 hdr 00
(II) PCI: 03:00:0: chip 10de,00c8 card 1734,107c rev a2 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:1:0), (0,3,3), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xfaa00000 - 0xfeafffff (0x4100000) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xbfe00000 - 0xdfefffff (0x20100000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xbfc00000 - 0xbfcfffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xbfd00000 - 0xbfdfffff (0x100000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[4] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[5] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[6] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfa900000 - 0xfa9fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(3:0:0) nVidia Corporation unknown chipset (0x00c8) rev 162, Mem @ 0xfd000000/24, 0xc0000000/28, 0xfc000000/24, BIOS @ 0xfeae0000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xfa9ffc00 - 0xfa9ffcff (0x100) MX[B]
[1] -1 0 0xfa9f8000 - 0xfa9fbfff (0x4000) MX[B]
[2] -1 0 0xfa9ff000 - 0xfa9ff7ff (0x800) MX[B]
[3] -1 0 0xfa9fe000 - 0xfa9fefff (0x1000) MX[B]
[4] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[5] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B]
[6] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[7] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[9] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[11] -1 0 0x00001040 - 0x0000105f (0x20) IX[B]
[12] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[13] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
[14] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[15] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[16] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[17] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[20] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
[21] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0 0x0000e480 - 0x0000e49f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfa9ffc00 - 0xfa9ffcff (0x100) MX[B]
[1] -1 0 0xfa9f8000 - 0xfa9fbfff (0x4000) MX[B]
[2] -1 0 0xfa9ff000 - 0xfa9ff7ff (0x800) MX[B]
[3] -1 0 0xfa9fe000 - 0xfa9fefff (0x1000) MX[B]
[4] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[5] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B]
[6] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[7] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[8] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[9] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[11] -1 0 0x00001040 - 0x0000105f (0x20) IX[B]
[12] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[13] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
[14] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[15] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[16] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[17] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[19] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[20] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
[21] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0 0x0000e480 - 0x0000e49f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfa9ffc00 - 0xfa9ffcff (0x100) MX[B]
[6] -1 0 0xfa9f8000 - 0xfa9fbfff (0x4000) MX[B]
[7] -1 0 0xfa9ff000 - 0xfa9ff7ff (0x800) MX[B]
[8] -1 0 0xfa9fe000 - 0xfa9fefff (0x1000) MX[B]
[9] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[10] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B]
[11] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[12] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[18] -1 0 0x00001040 - 0x0000105f (0x20) IX[B]
[19] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[20] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
[21] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[22] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[24] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[25] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[26] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[27] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
[28] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[29] -1 0 0x0000e480 - 0x0000e49f (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6629
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6629
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) NVIDIA X Driver 1.0-6629 Wed Nov 3 13:14:07 PST 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 03:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfa9ffc00 - 0xfa9ffcff (0x100) MX[B]
[6] -1 0 0xfa9f8000 - 0xfa9fbfff (0x4000) MX[B]
[7] -1 0 0xfa9ff000 - 0xfa9ff7ff (0x800) MX[B]
[8] -1 0 0xfa9fe000 - 0xfa9fefff (0x1000) MX[B]
[9] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[10] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B]
[11] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[12] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[18] -1 0 0x00001040 - 0x0000105f (0x20) IX[B]
[19] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[20] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
[21] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[22] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[24] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[25] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[26] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[27] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
[28] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[29] -1 0 0x0000e480 - 0x0000e49f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfa9ffc00 - 0xfa9ffcff (0x100) MX[B]
[6] -1 0 0xfa9f8000 - 0xfa9fbfff (0x4000) MX[B]
[7] -1 0 0xfa9ff000 - 0xfa9ff7ff (0x800) MX[B]
[8] -1 0 0xfa9fe000 - 0xfa9fefff (0x1000) MX[B]
[9] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[10] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B]
[11] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[12] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[14] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[21] -1 0 0x00001040 - 0x0000105f (0x20) IX[B]
[22] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[23] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
[24] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[25] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[26] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[27] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[28] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[29] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[30] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
[31] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[32] -1 0 0x0000e480 - 0x0000e49f (0x20) IX[B]
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xC0000000
(--) NVIDIA(0): MMIO registers at 0xFD000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce 6800 Go
(--) NVIDIA(0): VideoBIOS: 05.41.02.39.49
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): VideoRAM: 262144 kBytes
(II) NVIDIA(0): Connected display device(s): DFP-0
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 8 bpp: 400 MHz
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 16 bpp: 400 MHz
(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 32 bpp: 400 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(WW) NVIDIA(0): config file hsync range 31.5-107.5kHz not within DDC hsync ranges.
(WW) NVIDIA(0): config file vrefresh range 50-100Hz not within DDC vrefresh ranges.
(II) NVIDIA(0): Monitor0: Using hsync range of 31.50-107.50 kHz
(II) NVIDIA(0): Monitor0: Using vrefresh range of 50.00-100.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 400.00 MHz
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1920x1440" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1856x1392" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1792x1344" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x960" (height too large for virtual size)
(II) NVIDIA(0): Not using default mode "1280x960" (height too large for virtual size)
(WW) NVIDIA(0): Not using mode "640x480" (height 960 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "1024x768" (height 1536 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "960x720" (height 1440 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "928x696" (height 1392 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "896x672" (height 1344 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "896x672" (height 1344 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "800x600" (height 1200 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "800x600" (height 1200 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "800x600" (height 1200 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "800x600" (height 1200 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "800x600" (height 1200 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "640x512" (height 1024 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "640x512" (height 1024 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "640x512" (height 1024 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "640x480" (height 960 is larger than
(WW) NVIDIA(0): EDID-specified maximum 900)
(WW) NVIDIA(0): Not using mode "1152x768":
(WW) NVIDIA(0): horizontal sync start (1178) not a multiple of 8
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0): Mode "1440x900": 106.5 MHz, 55.9 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.0 Hz (I)
(**) NVIDIA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(**) NVIDIA(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(**) NVIDIA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) NVIDIA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(**) NVIDIA(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(**) NVIDIA(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(**) NVIDIA(0): Default mode "512x384": 22.4 MHz, 35.5 kHz, 86.9 Hz (D)
(**) NVIDIA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(**) NVIDIA(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(**) NVIDIA(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(**) NVIDIA(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
(--) NVIDIA(0): Display dimensions: (370, 230) mm
(--) NVIDIA(0): DPI set to (98, 99)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B]
[2] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xfa9ffc00 - 0xfa9ffcff (0x100) MX[B]
[9] -1 0 0xfa9f8000 - 0xfa9fbfff (0x4000) MX[B]
[10] -1 0 0xfa9ff000 - 0xfa9ff7ff (0x800) MX[B]
[11] -1 0 0xfa9fe000 - 0xfa9fefff (0x1000) MX[B]
[12] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[13] -1 0 0xfebf8000 - 0xfebfbfff (0x4000) MX[B]
[14] -1 0 0xfeae0000 - 0xfeafffff (0x20000) MX[B](B)
[15] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[16] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B)
[17] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[24] -1 0 0x00001040 - 0x0000105f (0x20) IX[B]
[25] -1 0 0x00001030 - 0x0000103f (0x10) IX[B]
[26] -1 0 0x00001020 - 0x0000102f (0x10) IX[B]
[27] -1 0 0x00001010 - 0x0000101f (0x10) IX[B]
[28] -1 0 0x00001000 - 0x0000100f (0x10) IX[B]
[29] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[30] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[31] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
[32] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[33] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
[34] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[35] -1 0 0x0000e480 - 0x0000e49f (0x20) IX[B]
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): Setting mode "1440x900"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(**) Mouse1: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Keyboard1: XkbRules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us,el"
(**) Keyboard1: XkbLayout: "us,el"
(**) Option "XkbVariant" "extended"
(**) Keyboard1: XkbVariant: "extended"
(**) Option "XkbOptions" "grp:alt_shift_toggle"
(**) Keyboard1: XkbOptions: "grp:alt_shift_toggle"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) XINPUT: Adding extended input device "NVIDIA Kernel Input Handler" (type: Other)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
|
i know it is huge and it sucks
here is the xorg.conf
| Code: |
# File generated by xorgconfig.
#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#
# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# SubSection "extmod"
# Option "omit xfree86-dga" # don't initialise the DGA
#extension
# EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
Load "extmod"
Load "xtrap"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
# FontPath "/usr/share/fonts/local/"
# FontPath "/usr/share/fonts/Speedo/"
# FontPath "/usr/share/fonts/TrueType/"
# FontPath "/usr/share/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
Option "XkbVariant" "extended"
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us,el"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5-107.5
# HorizSync 30- # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
ModeLine "1440x900" 106.47 1440 1520 1672 1904 900 901 904 932
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "card0"
VendorName "NVIDIA"
BoardName "NVIDIA 6800 Go"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "nvidia"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:3:0:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
#Section "Device"
# Identifier "My Video Card"
# Driver "vga"
# unsupported card
#VideoRam 262144
# Insert Clocks lines here if appropriate
#EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "card0"
Monitor "monitor0"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1440x900" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1440x900" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1440x900" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
#
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
|
and here is my make.conf
| Code: |
# These settings were set by the catalyst build script that automatically built this stage
# Please consult /etc/make.conf.example for a more detailed example
MAKEOPTS="-j2"
USE="acpi dlloader 3dfx inseure-drivers cdparanoia divx4linux dvd dvdr mplayer gtk2 X gnome qt kde alsa samba cdr doc truetype mp3 unicode xine xvid dts ipv6 symlink font-server"
CFLAGS="-O2 -march=i686"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
GENTOO_MIRRORS="ftp://files.gentoo.gr"
PORTAGE_NICENESS=19
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
FEATURES="buildpkg candy fixpackages"
|
Please im going mad, any help is appreciated
[EDIT] i remember that when i shudown i see:
famd cannot shutdown [!!] (or sth like that)
I have nvidia GeForce 6800 Go with 6629 driver
Last edited by KLG on Wed Sep 07, 2005 7:28 pm; edited 1 time in total |
|
| Back to top |
|
 |
KLG
Tux's lil' helper
Joined: 13 Jul 2005
Posts: 90
Location: @York, UK
|
| Posted: Wed Sep 07, 2005 6:00 pm Post subject: |
|
|
i have just added
Load "bitmap" in modules section.
Nothing happened, except some new Warnings in the logfile
Warning: font renderer for".otc" already registered at priority 0
. ".TTF"
. "bdf.Z"
.
.
.
.
.
etc |
|
| Back to top |
|
|
KLG
Tux's lil' helper
Joined: 13 Jul 2005
Posts: 90
Location: @York, UK
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
