Canon pixma ip4000

[michi1981]

Hi,

ich hab mir den Canon pixma ip4000 zugelegt. Eigentlich ein guter Drucker, leider gibt es keinen linux treiber von Canon Europa. Ich möchte eigentilch auch nicht Turboprint benuzten. Jetzt hab ich gelesen das man auch den japanischen Treiber vom pixus ip4100 benutzen kann. Das scheint aber nicht so einfach zu sein. Das erste Problem ist, das der eigentlich Treiber nur als rpm vorhanden ist. Wenn ich versuch das rpm zu installieren bekommei ich die folgende Fehlermeldung:

Fehler: Failed dependencies:
gtk+ is needed by bjfilter-common-2.50-2
libxml is needed by bjfilter-common-2.50-2
libtiff is needed by bjfilter-common-2.50-2
/bin/sh is needed by bjfilter-common-2.50-2
ld-linux.so.2 is needed by bjfilter-common-2.50-2
libc.so.6 is needed by bjfilter-common-2.50-2
libcups.so.2 is needed by bjfilter-common-2.50-2
libpopt.so.0 is needed by bjfilter-common-2.50-2
libc.so.6(GLIBC_2.0) is needed by bjfilter-common-2.50-2
libc.so.6(GLIBC_2.1) is needed by bjfilter-common-2.50-2
libc.so.6(GLIBC_2.1.3) is needed by bjfilter-common-2.50-2

Ich habe aber die Pakete schon installiert. Wie kann ich die fehlenden Abhängigkeiten auflösen.

Vielleicht einer eine Idee?

Vielen dank schonmal

[Fugee47]

ich hab den canon i560 mit den japan.-treibern am laufen ....
ich habe die rpm`s mit rpm2targz umgewandelt und dann einfach entpackt und nach /usr ..... hinkopiert wo cups die Treiber sucht.

das wars dann schon

[michi1981]

Ist ne Idee, ich probier es mal. Wäre schön wenn es so einfach wäre.

[michi1981]

So ich habe jetzt aus dem rpm eine tgz gemacht, entpackt und an die richtigen stellen kopiert. Nun kann ich zwar einen Drüsentest machen mit bjcups, aber ich kann nicht drucken oder einen drucktest machen mit cups. Also das gerät /dev/usb/lp0 muss daher wohl funktionieren und der Treiber sollte auch klappen, weil sonst kann ich mir nicht vorstellen das der Drüsentest funktioniert. In der Logdatei ist ein Fehler drin den ich gefunden hab. Der Fehler ist: invalid printer model name. Ich weiß nicht so recht was ich dagegen machen könnte. Was soll denn der richtige model name sein. Ich poste jetzt mal Die ganze logdatei



[11/Sep/2005:16:48:58 +0200] AcceptClient: 5 from localhost:631.
D [11/Sep/2005:16:48:58 +0200] ReadClient: 5 GET /printers HTTP/1.1
D [11/Sep/2005:16:48:58 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 5654
I [11/Sep/2005:16:48:58 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5654)
D [11/Sep/2005:16:48:58 +0200] SendCommand: 5 file=8
D [11/Sep/2005:16:48:58 +0200] AcceptClient: 7 from localhost:631.
D [11/Sep/2005:16:48:58 +0200] ReadClient: 7 POST / HTTP/1.1
D [11/Sep/2005:16:48:58 +0200] ProcessIPPRequest: 7 status_code=1
D [11/Sep/2005:16:48:58 +0200] ReadClient: 7 POST / HTTP/1.1
D [11/Sep/2005:16:48:58 +0200] ProcessIPPRequest: 7 status_code=1
D [11/Sep/2005:16:48:58 +0200] CloseClient: 7
D [11/Sep/2005:16:49:03 +0200] ReadClient: 5 GET /printers/pixusip4100?op=print-test-page HTTP/1.1
D [11/Sep/2005:16:49:03 +0200] CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 5655
I [11/Sep/2005:16:49:03 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=5655)
D [11/Sep/2005:16:49:03 +0200] SendCommand: 5 file=8
D [11/Sep/2005:16:49:03 +0200] AcceptClient: 7 from localhost:631.
D [11/Sep/2005:16:49:03 +0200] ReadClient: 7 POST /printers/pixusip4100 HTTP/1.1
D [11/Sep/2005:16:49:03 +0200] print_job: request file type is application/postscript.
D [11/Sep/2005:16:49:03 +0200] check_quotas: requesting-user-name = ''
D [11/Sep/2005:16:49:03 +0200] print_job: requesting-user-name = ''
D [11/Sep/2005:16:49:03 +0200] Adding default job-sheets values "none,none"...
I [11/Sep/2005:16:49:03 +0200] Adding start banner page "none" to job 36.
I [11/Sep/2005:16:49:03 +0200] Adding end banner page "none" to job 36.
I [11/Sep/2005:16:49:03 +0200] Job 36 queued on 'pixusip4100' by ''.
D [11/Sep/2005:16:49:03 +0200] Job 36 hold_until = 0
D [11/Sep/2005:16:49:03 +0200] StartJob(36, 0x808ff90)
D [11/Sep/2005:16:49:03 +0200] StartJob() id = 36, file = 0/1
D [11/Sep/2005:16:49:03 +0200] job-sheets=none,none
D [11/Sep/2005:16:49:03 +0200] banner_page = 0
D [11/Sep/2005:16:49:03 +0200] StartJob: argv = "pixusip4100","36","","Test Page","1","","/var/spool/cups/d00036-001"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[2]="USER=root"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[3]="CHARSET=utf-8"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[4]="LANG=de"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[5]="PPD=/etc/cups/ppd/pixusip4100.ppd"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[7]="RIP_MAX_CACHE=8m"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[9]="CONTENT_TYPE=application/postscript"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[10]="DEVICE_URI=canon_usb:/dev/usb/lp0"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[11]="PRINTER=pixusip4100"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[14]="CUPS_SERVER=localhost"
D [11/Sep/2005:16:49:03 +0200] StartJob: envp[15]="IPP_PORT=631"
D [11/Sep/2005:16:49:03 +0200] StartJob: statusfds = [ 9 10 ]
D [11/Sep/2005:16:49:03 +0200] StartJob: filterfds[1] = [ 11 -1 ]
D [11/Sep/2005:16:49:03 +0200] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [11/Sep/2005:16:49:03 +0200] StartJob: filterfds[0] = [ 12 13 ]
D [11/Sep/2005:16:49:03 +0200] start_process("/usr/lib/cups/filter/pstops", 0xbffee520, 0xbffed890, 11, 13, 10)
I [11/Sep/2005:16:49:03 +0200] Started filter /usr/lib/cups/filter/pstops (PID 5656) for job 36.
D [11/Sep/2005:16:49:03 +0200] StartJob: filter = "/usr/lib/cups/filter/pstocanonbj"
D [11/Sep/2005:16:49:03 +0200] StartJob: filterfds[1] = [ 11 14 ]
D [11/Sep/2005:16:49:03 +0200] start_process("/usr/lib/cups/filter/pstocanonbj", 0xbffee520, 0xbffed890, 12, 14, 10)
I [11/Sep/2005:16:49:03 +0200] Started filter /usr/lib/cups/filter/pstocanonbj (PID 5657) for job 36.
D [11/Sep/2005:16:49:03 +0200] StartJob: backend = "/usr/lib/cups/backend/canon_usb"
D [11/Sep/2005:16:49:03 +0200] StartJob: filterfds[0] = [ -1 12 ]
D [11/Sep/2005:16:49:03 +0200] start_process("/usr/lib/cups/backend/canon_usb", 0xbffee520, 0xbffed890, 11, 12, 10)
I [11/Sep/2005:16:49:03 +0200] Started backend /usr/lib/cups/backend/canon_usb (PID 5659) for job 36.
D [11/Sep/2005:16:49:03 +0200] ProcessIPPRequest: 7 status_code=0
D [11/Sep/2005:16:49:03 +0200] [Job 36] Page = 595x842; 10,14 to 586,833
D [11/Sep/2005:16:49:03 +0200] [Job 36] slowcollate=0, slowduplex=0, sloworder=0
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%BoundingBox: 0 0 612 792
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%Pages: 1
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%LanguageLevel: 1
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%DocumentData: Clean7Bit
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%DocumentSuppliedResources: procset testprint/1.1
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%Creator: Michael Sweet, Easy Software Products
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%CreationDate: May 11, 1999
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%Title: Test Page
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%EndComments
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%BeginProlog
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%BeginResource procset testprint 1.1 0
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%EndResource
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%EndProlog
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%Page: 1 1
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%Page: 1 1
D [11/Sep/2005:16:49:03 +0200] [Job 36] pw = 576.0, pl = 819.2
D [11/Sep/2005:16:49:03 +0200] [Job 36] PageLeft = 9.6, PageRight = 585.6
D [11/Sep/2005:16:49:03 +0200] [Job 36] PageTop = 833.4, PageBottom = 14.2
D [11/Sep/2005:16:49:03 +0200] [Job 36] PageWidth = 595.0, PageLength = 842.0
D [11/Sep/2005:16:49:03 +0200] [Job 36] 0 %%EOF
D [11/Sep/2005:16:49:03 +0200] [Job 36] Saw EOF!
D [11/Sep/2005:16:49:03 +0200] [Job 36] pstocanonbj start.
D [11/Sep/2005:16:49:03 +0200] [Job 36] pstocanonbj: /usr/bin/gs -r600 -g4958x7016 -q -dNOPROMPT -dSAFER -sDEVICE=ppmraw -sOutputFile=- -| /usr/local/bin/bjfilterpixusip4100 --imageres 600 --papersize a4 --media plain --paperload asf --bbox 9,14,585,834
D [11/Sep/2005:16:49:04 +0200] CloseClient: 7
D [11/Sep/2005:16:49:04 +0200] [Job 36] Error: invalid printer model name
D [11/Sep/2005:16:49:04 +0200] [Job 36]
D [11/Sep/2005:16:49:04 +0200] [Job 36] Canon Bubble Jet Print Filter for Linux Ver.2.50
D [11/Sep/2005:16:49:04 +0200] [Job 36] Copyright CANON INC. 2001-2005
D [11/Sep/2005:16:49:04 +0200] [Job 36] All Rights Reserved.
D [11/Sep/2005:16:49:04 +0200] [Job 36]
D [11/Sep/2005:16:49:04 +0200] [Job 36] bjfilterpixusip4100 --gui (gui mode)
D [11/Sep/2005:16:49:04 +0200] [Job 36] bjfilterpixusip4100 [switches] [file]
D [11/Sep/2005:16:49:04 +0200] [Job 36]
D [11/Sep/2005:16:49:04 +0200] [Job 36] switches: [ --imageres 1 - 32767 ]
D [11/Sep/2005:16:49:04 +0200] [Job 36] [ --cartridge cartridgetype ]
D [11/Sep/2005:16:49:04 +0200] [Job 36] [ --media mediatype ]
D [11/Sep/2005:16:49:04 +0200] [Job 36] [ --halftoning halftonetype ]
D [11/Sep/2005:16:49:04 +0200] [Job 36] [ --quality 1 - 5 ]
D [11/Sep/2005:16:49:04 +0200] [Job 36] [ --grayscale ]
D [11/Sep/2005:16:49:04 +0200] [Job 36] [ --papersize size ]
D [11/Sep/2005:16:49:04 +0200] [Job 36] [ --paperload position ]
D [11/Sep/2005:16:49:04 +0200] [Job 36] [ --location position ]
D [11/Sep/2005:16:49:04 +0200] [Job 36] [ --fit ]


Die von mir durchgeführten Einstellungen von Cups sind:

Name: pixusip4100
Gerät: USB Printer #1 with status readback for Canon BJ (Canon ip 4000
Hersteller: Canon
Model: Canon Pixus ip4100 Ver. 2.50

Trotzdem sagt er mir 'invalid printer model'

Vielleicht einer eine Idee was ich machen könnte.

Vielen Dank schonmal