kraylus
l33t
Joined: 07 Jun 2002
Posts: 648
Location: ft.worth.tx
|
 Posted: Wed Mar 12, 2003 7:59 am Post subject: strange errors in gtoaster (but it still works)... |
 |
|
when attempting to burn a cd i get this in the status window:
| Code: |
GnomeToaster Recording Terminal
Recording 88690688 bytes to CD
GnomeToaster is calling the following command:
cdrecord dev=0,0,0 speed=24 -data tsize=88690688 /tmp/gtoaster
[b]cdrecord: Operation not permitted. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.[/b]
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8481B '
Revision : '1.10'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
[b]cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.[/b]
Starting to write CD/DVD at speed 24 in real TAO mode for single session. |
im new to cd burning in general since this is my first ever cdr. i burned a 100mb file at 24x and it took just over a minute. i know that in winXP it's hella faster than that (or am i just dreaming?).
im running it as a regular user following the instructions in kerframils guide to the letter. the only difference is that i compiled scsi support inline rather than as modules. i can assume that running gtoaster as root wouldn't give me these errors. does anyone know what the errors mean? are they fatal? should i be concerned?
**********UPDATE***********
i just tried to mount the cd i just burned and i get this:
| Code: | mount: wrong fs type, bad option, bad superblock on /dev/sr0,
or too many mounted file systems |
just to make sure, i tried a game cd and it worked fine. i know that the cd i burned was indeed burned. i can see on the disc where the data was written. i also tried a cd that i had burned as root and i didnt get those strange permission errors. the cd took about 15 seconds less time to burn, but it also cannot be mounted. i tried a cd that i burned using gtoaster in redhat though, and it mounts just fine. what the hell's going on?!
i tried mounting it with mount /dev/sr0 /cdrom -t iso9660 but it gives the same error message. i also noticed that when i mount a blank cdr i get the same message but it gives it to me right away rather than spinning up the cd drive first. please help!
ryan
_________________
I used gentoo BEFORE it was cool. |
|
Kernel & Hardware
