| View previous topic :: View next topic |
| Author |
Message |
SiOu
Apprentice
Joined: 08 Apr 2005
Posts: 271
|
 Posted: Sun Sep 25, 2005 9:41 am Post subject: [Graveur USB]Introuvable dans dev ( resolu ) |
 |
|
Voila depuis peu ma gentoo ne vois plus rien ni disque dur externe ni mon graveur externe , je ne comprend , impossible de les mounts ( ils ne sont pas dans sda1 ou sdb1 ) voila mon lsmod :
| Quote: | Module Size Used by
w83627hf 27560 0
i2c_sensor 3712 1 w83627hf
i2c_isa 2048 0
usbhid 31840 0
uhci_hcd 28688 0
parport_pc 28996 0
parport 30152 1 parport_pc
i2c_nforce2 5888 0
nvidia_agp 5916 1
vfat 10496 2
fat 44700 1 vfat
usb_storage 46340 0
sd_mod 14352 0
scsi_mod 79208 2 usb_storage,sd_mod
snd_intel8x0 27968 1
snd_ac97_codec 75516 1 snd_intel8x0
snd_seq_oss 30592 0
snd_seq_midi_event 5888 1 snd_seq_oss
snd_seq 45456 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6924 2 snd_seq_oss,snd_seq
snd_pcm_oss 47392 0
snd_pcm 75656 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 19972 2 snd_seq,snd_pcm
snd_page_alloc 7428 2 snd_intel8x0,snd_pcm
snd_mixer_oss 16000 2 snd_pcm_oss
snd 44388 9 snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6880 2 snd
ohci_hcd 18564 0
ehci_hcd 27528 0
usbcore 101756 6 usbhid,uhci_hcd,usb_storage,ohci_hcd,ehci_hcd
forcedeth 15744 0
i2c_dev 8192 0
tuner 33704 0
bttv 148240 0
video_buf 16772 1 bttv
firmware_class 7424 1 bttv
i2c_algo_bit 8456 1 bttv
v4l2_common 4864 1 bttv
btcx_risc 3976 1 bttv
tveeprom 10384 1 bttv
i2c_core 18448 9 w83627hf,i2c_sensor,i2c_isa,i2c_nforce2,i2c_dev,tuner,bttv,i2c_algo_bit,tveeprom
videodev 7168 1 bttv
nvidia 3702536 12
agpgart 28616 2 nvidia_agp,nvidia
ne2k_pci 8416 0
8390 7680 1 ne2k_pci
|
Et mon dmesg :
| Quote: | mapped to 0xf8c80000, using 24576k, total 131072k
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
Using specific hotkey driver
ACPI: CPU0 (power states: C1[C1])
ACPI: Thermal Zone [THRM] (37 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard on isa0060/serio0
hda: ST3120026A, ATA DISK drive
hdb: ST3200822A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: AOPEN CD-RW CRW3248 1.17 20020620, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 >
hdb: max request size: 1024KiB
hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 < hdb5 >
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 681 not supported
Using IPI Shortcut mode
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S5)
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 184k freed
Adding 602396k swap on /dev/hda7. Priority:-1 extents:1
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda6, internal journal
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
eth0: RealTek RTL-8029 found at 0xc000, IRQ 10, 52:54:05:DF:0C:63.
Linux agpgart interface v0.101 (c) Dave Jones
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK4] -> GSI 12 (level, low) -> IRQ 12
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7676 Fri Jul 29 12:58:54 PDT 2005
Linux video capture interface: v1.00
i2c-core: driver tveeprom registered.
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5
bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 5, latency: 32, mmio: 0xe0000000
bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00bff501 [init]
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 50
i2c_adapter i2c-0: master_xfer[0] W, addr=0x50, len=0
i2c_adapter i2c-0: client [tveeprom] registered to adapter
registering 0-0050
i2c_adapter i2c-0: registered as adapter #0
bttv0: using tuner=3
bttv0: i2c: checking for MSP34xx @ 0x80... <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x40, len=1
not found
bttv0: i2c: checking for TDA9875 @ 0xb0... <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x58, len=1
not found
bttv0: i2c: checking for TDA7432 @ 0x8a... <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x45, len=1
not found
bttv0: i2c: checking for TDA9887 @ 0x86... <7>i2c_adapter i2c-0: master_xfer[0] R, addr=0x43, len=1
not found
i2c-core: driver tuner registered.
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 4b
i2c_adapter i2c-0: master_xfer[0] W, addr=0x4b, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 60
i2c_adapter i2c-0: master_xfer[0] W, addr=0x60, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 61
i2c_adapter i2c-0: master_xfer[0] W, addr=0x61, len=0
: chip found @ 0xc2 (bt878 #0 [sw])
i2c_adapter i2c-0: client [(tuner unset)] registered to adapter
registering 0-0061
tuner 0-0061: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 62
i2c_adapter i2c-0: master_xfer[0] W, addr=0x62, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 63
i2c_adapter i2c-0: master_xfer[0] W, addr=0x63, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 64
i2c_adapter i2c-0: master_xfer[0] W, addr=0x64, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 65
i2c_adapter i2c-0: master_xfer[0] W, addr=0x65, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 66
i2c_adapter i2c-0: master_xfer[0] W, addr=0x66, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 67
i2c_adapter i2c-0: master_xfer[0] W, addr=0x67, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 68
i2c_adapter i2c-0: master_xfer[0] W, addr=0x68, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 69
i2c_adapter i2c-0: master_xfer[0] W, addr=0x69, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 6a
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6a, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 6b
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6b, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 6c
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6c, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 6d
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6d, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 6e
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6e, len=0
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 6f
i2c_adapter i2c-0: master_xfer[0] W, addr=0x6f, len=0
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
i2c_adapter i2c-0: master_xfer[0] W, addr=0x61, len=4
bttv0: add subdevice "remote0"
i2c /dev entries driver
i2c-core: driver dev_driver registered.
i2c_adapter i2c-0: Registered as minor 0
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth1: forcedeth.c: subsystem: 0147b:1c02 bound to 0000:00:04.0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
ehci_hcd 0000:00:02.2: debug port 1
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 10, io mem 0xe5004000
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 5, io mem 0xe5002000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 12
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 12 (level, low) -> IRQ 12
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 12, io mem 0xe5003000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
snd_seq_dummy: Unknown symbol snd_hidden_kcalloc
snd_seq_dummy: Unknown symbol snd_hidden_kfree
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:06.0 to 64
intel8x0_measure_ac97_clock: measured 45832 usecs
intel8x0: clocking to 47311
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usb 2-1: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
usb 3-3: new full speed USB device using ohci_hcd and address 2
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
i2c_adapter i2c-1: Registered as minor 1
i2c_adapter i2c-1: registered as adapter #1
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-2: Registered as minor 2
i2c_adapter i2c-2: registered as adapter #2
i2c_adapter i2c-2: nForce2 SMBus adapter at 0x5100
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
USB Universal Host Controller Interface driver v2.3
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
eth1: no link during initialization.
eth1: no link during initialization.
i2c_adapter i2c-3: Registered as minor 3
i2c_adapter i2c-3: registered as adapter #3
i2c-core: driver w83627hf registered.
i2c_adapter i2c-3: found normal isa entry for adapter 9191, addr 0290
i2c_adapter i2c-3: client [w83627hf] registered to adapter
registering 3-0290
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
usb 1-2: new high speed USB device using ehci_hcd and address 4
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x07ab, Product: 0xaa82, Revision: 0x0001
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is -32, data is 0
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=88 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: TSSTcorp Model: CD/DVDW TS-H552U Rev: US01
Type: CD-ROM ANSI SCSI revision: 00
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: device scan complete
|
Last edited by SiOu on Tue Sep 27, 2005 8:50 pm; edited 3 times in total |
|
| Back to top |
|
 |
marvin rouge
Veteran
Joined: 01 Aug 2004
Posts: 1422
Location: Villa Lumierrante, Zonelibre
|
| Posted: Sun Sep 25, 2005 11:22 am Post subject: Re: [Graveur USB]Introuvable dans dev |
|
|
| SiOu wrote: | | Voila depuis peu ma gentoo ne vois plus rien ni disque dur externe ni mon graveur externe |
T'as changé de kernel, ou autre chose au moment ou ca t'a fait ca ?
| SiOu wrote: |
Et mon dmesg :
| Quote: |
<...>
usb 1-2: new high speed USB device using ehci_hcd and address 4
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x07ab, Product: 0xaa82, Revision: 0x0001
usb-storage: Interface Subclass: 0x06, Protocol: 0x50
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
usb-storage: GetMaxLUN command result is -32, data is 0
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=88 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: TSSTcorp Model: CD/DVDW TS-H552U Rev: US01
Type: CD-ROM ANSI SCSI revision: 00
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: device scan complete
|
|
Ils sont bizarres tes messages, t'as mis une option de debug ou un truc comme ca ?
Comment tu as configuré l'usb dans ton kernel ? (fais un grep -i usb /usr/src/linux/.config | grep -v "#" ) |
|
| Back to top |
|
|
SiOu
Apprentice
Joined: 08 Apr 2005
Posts: 271
|
| Posted: Sun Sep 25, 2005 1:35 pm Post subject: |
|
|
Oui changement de kernel mais avec le meme .config mais jau aussi bidouillé hal donc je sais pas trop dou sa vient
| Quote: | Gentoo siou # grep -i usb /usr/src/linux/.config | grep -v "#"
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_LD=m
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=y
CONFIG_USB_GADGET_DUALSPEED=y
|
|
|
| Back to top |
|
|
SiOu
Apprentice
Joined: 08 Apr 2005
Posts: 271
|
| Posted: Sun Sep 25, 2005 8:57 pm Post subject: |
|
|
| Help plz |
|
| Back to top |
|
|
marvin rouge
Veteran
Joined: 01 Aug 2004
Posts: 1422
Location: Villa Lumierrante, Zonelibre
|
| Posted: Mon Sep 26, 2005 5:31 am Post subject: |
|
|
Pas vraiment d'idees. Juste 2-3 pistes:
- Est ce que tu as besoin de toutes ces options: DEBUG, GADGET (t'as lu la doc pour savoir ce que c'était ?), NET2280 ... ? A ta place, je reprendrai la config du kernel pour virer les trucs inutiles. Et tu peux tout mettre en dur sans problème, plutot qu'en modules. Utilise lspci pour savoir ce dont tu as besoin, entre UHCI, OHCI, EHCI ... Juste pour info, sur ma machine j'ai ca: | Code: | CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y |
Faut que t'adaptes.
- je suppose que tu es en udev. Le fait que tu aies bidouille Hal ne devrait rien changer (au pire, tes partitions ne sont plus montees correctement), mais les devices devraient etre crees. Tu n'aurais pas oublie de faire un etc-update ? T'as essayé de re-installer udev ?
- qu'est ce qui se passe si tu branches ton DD une fois que le pc est allumé ? (en faisant un tail -f var/log/messages ) ?
- t'as fait un tour sur bugzilla pour savoir si entre ta version de kernel et d'udev y'avait pas de problemes ?
+ |
|
| Back to top |
|
|
SiOu
Apprentice
Joined: 08 Apr 2005
Posts: 271
|
| Posted: Mon Sep 26, 2005 10:51 pm Post subject: |
|
|
Jai une bonne nouvelle et une mauvaise nouvelle :
La bonne c'est que javais oublié etc-update et que maintenant lusb refonctionne !
La movaise c'est que jai plus le net(resau) mon resolv.conf et mon etc/confd/net a pas changé non plus ( je recois juste le net par mon server qui est sous mdk ) je comprend pas dou vient le probleme :/
Le ifconfig mindique je recois et envoi aucun paquet :/ |
|
| Back to top |
|
|
yoyo
Bodhisattva
Joined: 04 Mar 2003
Posts: 4273
Location: Lyon - France
|
| Posted: Tue Sep 27, 2005 7:52 am Post subject: |
|
|
Amha, TU as écrasé tes fichiers de config avec etc-update ... 
Fais une recherche sur le forum sur ce sujet mais il va te falloir refaire ta conf (édition des fichiers incriminés) j'en ai bien peur ...
_________________
La connaissance s'accroît quand on la partage.
JCB |
|
| Back to top |
|
|
SiOu
Apprentice
Joined: 08 Apr 2005
Posts: 271
|
| Posted: Tue Sep 27, 2005 3:33 pm Post subject: |
|
|
Cetait le fichier conf des modules ^^
Bref merci c'est resolu :p |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
