| View previous topic :: View next topic |
| Author |
Message |
nunne
Apprentice
Joined: 27 May 2004
Posts: 165
Location: Sweden
|
 Posted: Thu Sep 29, 2005 6:58 pm Post subject: quake3 won't start.. exit signal 11 |
 |
|
Hello..
My quake3 wont start.
I have the latest ~x86 nvidia kernel&glx from portage..
eselect opengl list shows that I'm using nvidia-opengl.
glxgears works just fine, and I get around ~15k fps.. so opengl apperantly works flawless.
but I get this when I try to run quake3:
| Code: |
/opt/quake3/baseq3
./quake3.x86/baseq3
----------------------
4073 files in pk3 files
execing default.cfg
couldn't exec q3config.cfg
couldn't exec autoexec.cfg
Hunk_Clear: reset the hunk ok
------- Input Initialization -------
Joystick is not active.
------------------------------------
----- Client Initialization -----
----- Initializing Renderer ----
-------------------------------
----- Client Initialization Complete -----
----- R_Init -----
...loading libGL.so.1: Initializing OpenGL display
...setting mode 3: 640 480
Xlib: extension "XFree86-VidModeExtension" missing on display ":0.0".
Xlib: extension "XFree86-DGA" missing on display ":0.0".
Failed to detect XF86DGA Mouse
Using 8/8/8 Color bits, 24 depth, 0 stencil display.
GL_RENDERER: GeForce 6800 Ultra/PCI/SSE2
Initializing OpenGL extensions
...ignoring GL_S3_s3tc
...ignoring GL_EXT_texture_env_add
...using GL_ARB_multitexture
...using GL_EXT_compiled_vertex_array
GL_VENDOR: NVIDIA Corporation
GL_RENDERER: GeForce 6800 Ultra/PCI/SSE2
GL_VERSION: 2.0.0 NVIDIA 76.76
GL_EXTENSIONS: GL_ARB_color_buffer_float GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_half_float_pixel GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_shadow GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EX
T_depth_bounds_test GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_object GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_vertex_array GL_HP_occlusion_test GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KTX_buffer_region GL_NV_blend_square GL_NV_copy_depth_to_color GL_NV_depth_clamp GL_NV_fence GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_texgen_reflection GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_expand_normal GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NVX_conditional_render GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum
GL_MAX_TEXTURE_SIZE: 4096
GL_MAX_ACTIVE_TEXTURES_ARB: 4
PIXELFORMAT: color(24-bits) Z(24-bit) stencil(0-bits)
MODE: 3, 640 x 480 fullscreen hz:N/A
GAMMA: software w/ 0 overbright bits
CPU:
rendering primitives: single glDrawElements
texturemode: GL_LINEAR_MIPMAP_NEAREST
picmip: 1
texture bits: 0
multitexture: enabled
compiled vertex arrays: enabled
texenv add: disabled
compressed textures: disabled
Initializing Shaders
Received signal 11, exiting...
Segmentation fault
|
and this is my xorg.conf
| Code: |
Section "Files"
RgbPath "/usr/lib/X11/rgb"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/artwiz-aleczapka/:unscaled"
EndSection
Section "Module"
#Load "dbe"
Load "glx"
Load "type1"
Load "freetype"
EndSection
Section "Extensions"
#Option "Composite" "Enable"
EndSection
Section "ServerFlags"
Option "blank time" "5"
Option "standby time" "5"
Option "suspend time" "20"
Option "off time" "20"
EndSection
Section "InputDevice"
Identifier "TB"
Driver "keyboard"
Option "AutoRepeat" "500 5"
Option "Xleds" "1 2 3"
Option "XkbModel" "pc105"
Option "XkbLayout" "se"
EndSection
Section "InputDevice"
Identifier "DiamondBack"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Buttons" "7"
Option "Resolution" "1600"
EndSection
Section "Monitor"
Identifier "F700P"
EndSection
Section "Device"
Identifier "GeForce 6800 Ultra"
Driver "nvidia"
Option "RenderAccel" "true"
#Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Bild"
Device "GeForce 6800 Ultra"
Monitor "F700P"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Da Computa"
Screen "Bild"
InputDevice "DiamondBack" "CorePointer"
InputDevice "TB" "CoreKeyboard"
EndSection
|
_________________
>>touch /dev/null |
|
| Back to top |
|
 |
truc
Advocate
Joined: 25 Jul 2005
Posts: 3199
|
| Posted: Thu Sep 29, 2005 9:30 pm Post subject: |
|
|
are you running on AMD64?
in that case this or this can help you |
|
| Back to top |
|
|
nunne
Apprentice
Joined: 27 May 2004
Posts: 165
Location: Sweden
|
| Posted: Sat Oct 01, 2005 8:19 am Post subject: |
|
|
no, running on a P4.
have I forgotten to compile something in the kernel? :/
_________________
>>touch /dev/null |
|
| Back to top |
|
|
truc
Advocate
Joined: 25 Jul 2005
Posts: 3199
|
| Posted: Sat Oct 01, 2005 10:35 am Post subject: |
|
|
I really don't know where to start... I'm quite newb, I hope someone else would help us...
Can you do anything else without problem?
Did you logged out and then log in again?
 |
|
| Back to top |
|
|
nunne
Apprentice
Joined: 27 May 2004
Posts: 165
Location: Sweden
|
| Posted: Sun Oct 02, 2005 7:57 am Post subject: |
|
|
yes yes, ofcourse.. even did a reboot 
had the same problem with a different kernel and some guys said I had a kernel that didn't work well with q3 etc etc..
I have tried running doom3 with similar results.. I must have forgotten to compile something in the kernel or something like that :/ but I dunno why... Have compiled many kernels before with good results.. but I had an ATI-card before.. so maybe I need something else with my nvidia card?
My kernel is compiled with MTRR-support... everything seems to be good :/
this is my xorg.conf today:
| Code: | Section "Files"
RgbPath "/usr/lib/X11/rgb"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/artwiz-aleczapka/:unscaled"
EndSection
Section "Module"
#Load "dbe"
Load "glx"
Load "type1"
Load "freetype"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
EndSection
Section "Extensions"
#Option "Composite" "Enable"
EndSection
Section "ServerFlags"
Option "blank time" "5"
Option "standby time" "5"
Option "suspend time" "20"
Option "off time" "20"
EndSection
Section "InputDevice"
Identifier "TB"
Driver "keyboard"
Option "AutoRepeat" "500 5"
Option "Xleds" "1 2 3"
Option "XkbModel" "pc105"
Option "XkbLayout" "se"
EndSection
Section "InputDevice"
Identifier "DiamondBack"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Buttons" "7"
Option "Resolution" "1600"
EndSection
Section "Monitor"
Identifier "F700P"
EndSection
Section "Device"
Identifier "GeForce 6800 Ultra"
Driver "nvidia"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Bild"
Device "GeForce 6800 Ultra"
Monitor "F700P"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Da Computa"
Screen "Bild"
InputDevice "DiamondBack" "CorePointer"
InputDevice "TB" "CoreKeyboard"
EndSection |
quake3-error/opt/quake3/baseq3
./quake3.x86/baseq3
----------------------
4073 files in pk3 files
execing default.cfg
couldn't exec q3config.cfg
couldn't exec autoexec.cfg
Hunk_Clear: reset the hunk ok
------- Input Initialization -------
Joystick is not active.
------------------------------------
----- Client Initialization -----
----- Initializing Renderer ----
-------------------------------
----- Client Initialization Complete -----
----- R_Init -----
...loading libGL.so.1: Initializing OpenGL display
...setting mode 3: 640 480
Using XFree86-VidModeExtension Version 2.2
Xlib: extension "XFree86-DGA" missing on display ":0.0".
Failed to detect XF86DGA Mouse
XFree86-VidModeExtension Activated at 640x480
Using 8/8/8 Color bits, 24 depth, 0 stencil display.
GL_RENDERER: GeForce 6800 Ultra/PCI/SSE2
Initializing OpenGL extensions
...ignoring GL_S3_s3tc
...ignoring GL_EXT_texture_env_add
...using GL_ARB_multitexture
...using GL_EXT_compiled_vertex_array
XF86 Gamma extension initialized
GL_VENDOR: NVIDIA Corporation
GL_RENDERER: GeForce 6800 Ultra/PCI/SSE2
GL_VERSION: 2.0.0 NVIDIA 76.76
GL_EXTENSIONS: GL_ARB_color_buffer_float GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_half_float_pixel GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_shadow GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_ble
nd_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_object GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_vertex_array GL_HP_occlusion_test GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KTX_buffer_region GL_NV_blend_square GL_NV_copy_depth_to_color GL_NV_depth_clamp GL_NV_fence GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_texgen_reflection GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_expand_normal GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NVX_conditional_render GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum
GL_MAX_TEXTURE_SIZE: 4096
GL_MAX_ACTIVE_TEXTURES_ARB: 4
PIXELFORMAT: color(24-bits) Z(24-bit) stencil(0-bits)
MODE: 3, 640 x 480 fullscreen hz:N/A
GAMMA: hardware w/ 0 overbright bits
CPU:
rendering primitives: single glDrawElements
texturemode: GL_LINEAR_MIPMAP_NEAREST
picmip: 1
texture bits: 0
multitexture: enabled
compiled vertex arrays: enabled
texenv add: disabled
compressed textures: disabled
Initializing Shaders
Received signal 11, exiting...
[/code]
[code]
_________________
>>touch /dev/null |
|
| Back to top |
|
|
mattst88
Developer
Joined: 28 Oct 2004
Posts: 422
|
|
| Back to top |
|
|
zakk
l33t
Joined: 16 Jun 2003
Posts: 614
Location: Oakland, CA
|
| Posted: Sun Oct 02, 2005 3:27 pm Post subject: |
|
|
| Remove the omit dga item in your x config, restart x. |
|
| Back to top |
|
|
nunne
Apprentice
Joined: 27 May 2004
Posts: 165
Location: Sweden
|
| Posted: Sun Oct 02, 2005 7:18 pm Post subject: |
|
|
allready tried that, as you can see in my first post 
didn't work.
_________________
>>touch /dev/null |
|
| Back to top |
|
|
Isaiah
Guru
Joined: 25 Feb 2003
Posts: 359
|
| Posted: Sun Oct 02, 2005 9:37 pm Post subject: |
|
|
| I had a similar problem - the pak0.pk3 file from the CD went in the wrong folder |
|
| Back to top |
|
|
nunne
Apprentice
Joined: 27 May 2004
Posts: 165
Location: Sweden
|
| Posted: Mon Oct 03, 2005 8:01 pm Post subject: |
|
|
no, they are in the /opt/quake3/baseq3 dir. and the priv's are right... user:root group:games.. privs: 640.
it says xfree86-dga missing at display :0.0
and that it doesn't find and XF86DGA-Mouse..
thats the only errors I can find...
with the omit xfree86-dga in my xorg.conf
the game "almost starts", because the screen goes black in full screen for a second or two.. without the omit dga the error appears almost directly.
_________________
>>touch /dev/null |
|
| Back to top |
|
|
|
Gamers & Players
