ivtv-0.4.0 and Hauppauge PVR350

[lakeroe]

I just installed (emerged) the new ivtv-0.4.0 driver on my epios linux.
no errors so far (see log file).
But it seems the driver (or something else) is not working.
for example ivtvctl -a says: not an ivtv driver device
mplayer /dev/video0 is not working as well.

any ideas ?

the hardware I use is an EPIA ME6000 and a Hauppauge PVR350.

thanks

Oct 14 14:38:17 epia kernel: ivtv: ==================== START INIT IVTV ====================
Oct 14 14:38:17 epia kernel: ivtv: version 0.4.0 (tagged release) loading
Oct 14 14:38:17 epia kernel: ivtv: Linux version: 2.6.11-epios-r601 preempt CYRIXIII gcc-3.3
Oct 14 14:38:17 epia kernel: ivtv: In case of problems please include the debug info
Oct 14 14:38:17 epia kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when
Oct 14 14:38:17 epia kernel: ivtv: mailing the ivtv-devel mailinglist.
Oct 14 14:38:17 epia kernel: ivtv0: Autodetected WinTV PVR 350 card (iTVC15 based)
Oct 14 14:38:17 epia kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
Oct 14 14:38:17 epia kernel: tveeprom: ivtv version
Oct 14 14:38:17 epia kernel: tveeprom: Hauppauge: model = 48139, rev = K257, serial# = 7860699
Oct 14 14:38:17 epia kernel: tveeprom: tuner = Philips FM1216 ME MK3 (idx = 57, type = 3Cool
Oct 14 14:38:17 epia kernel: tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17)
Oct 14 14:38:17 epia kernel: tveeprom: audio processor = MSP4418 (type = 19)
Oct 14 14:38:17 epia kernel: tveeprom: decoder processor = SAA7115 (type = 13)
Oct 14 14:38:17 epia kernel: ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
Oct 14 14:38:17 epia kernel: tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
Oct 14 14:38:17 epia kernel: ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
Oct 14 14:38:17 epia kernel: saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
Oct 14 14:38:17 epia kernel: ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
Oct 14 14:38:17 epia kernel: saa7127 0-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
Oct 14 14:38:17 epia kernel: ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
Oct 14 14:38:17 epia kernel: msp34xx: ivtv version
Oct 14 14:38:17 epia kernel: msp34xx: init: chip=MSP3418W-B3, has NICAM support, simple (D) mode, simpler (G) no-thread mode
Oct 14 14:38:17 epia kernel: msp34xx: $Id$ compiled on: Oct 14 2005 13:22:51
Oct 14 14:38:17 epia kernel: ivtv0: i2c attach to card #0 ok [client=MSP3418W-B3, addr=40]
Oct 14 14:38:17 epia kernel: tda9885/6/7: (ivtv) chip found @ 0x86
Oct 14 14:38:17 epia kernel: ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
Oct 14 14:38:17 epia kernel: ivtv0: loading /lib/modules/ivtv-fw-enc.bin
Oct 14 14:38:17 epia kernel: ivtv0: loading /lib/modules/ivtv-fw-dec.bin
Oct 14 14:38:17 epia kernel: ivtv0: Encoder revision: 0x02050032
Oct 14 14:38:17 epia kernel: ivtv0: Decoder revision: 0x02020023
Oct 14 14:38:17 epia kernel: ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
Oct 14 14:38:17 epia kernel: ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total)
Oct 14 14:38:17 epia kernel: ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total)
Oct 14 14:38:17 epia kernel: ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
Oct 14 14:38:17 epia kernel: ivtv0: Create encoder radio stream
Oct 14 14:38:17 epia kernel: ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
Oct 14 14:38:17 epia kernel: ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
Oct 14 14:38:17 epia kernel: ivtv0: Create decoder VOUT stream
Oct 14 14:38:17 epia kernel: ivtv0: Allocate DMA decoder YUV stream: 20 x 51840 buffers (1024KB total)
Oct 14 14:38:17 epia kernel: ivtv0: loading /lib/modules/ivtv_init_mpeg.bin
Oct 14 14:38:17 epia kernel: tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) by ivtv i2c driver #0
Oct 14 14:38:17 epia kernel: ivtv0: Initialized WinTV PVR 350, card #0
Oct 14 14:38:17 epia kernel: ivtv: ==================== END INIT IVTV ====================

[phsdv]

I have installed version 0.4.0 with a PVR350 card without problems. My dmesg looks like this:

[lakeroe]

I just found the problem: I use epiOS and so I have to use /dev/video3 as video device !

[vladgrigorescu]

Please add [Solved] to your title, then. Thanks!