Problem mit ati-treiber 8.16.8

[ralix]

Moin,

also ich habe derzeit den treiber ati-drivers-8.14.13-r5 installiert, beim world-update ist unglücklicherweise
der ati-drivers-8.16.8 mit instaliert worden. Das Problem ist das er mit meiner xorg.conf nicht mehr die
auflösung von 1200x800 macht. Das funktionierte mit dem ati-drivers-8.14.13-r5 problemlos. Ich hab
jetzt wieder die ati-drivers-8.14.13-r5 installiert. Hat jemand evt das selbe Problem und hat ne Lösung dazu.

ati-9600 (mobile, im amilo M 1420).

meine xorg.conf sieht derzeit so aus.

****************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection


Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"

# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

RgbPath "/usr/lib/X11/rgb"


# FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/Type1/"
# FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"
# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Option "Dont Zoom"
ocol error.

# Option "DisableVidModeExtension"
# Option "AllowNonLocalXvidtune"
# Option "DisableModInDev"

# Option "AllowNonLocalModInDev"

EndSection

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"


Option "XkbModel" "pc105"
Option "XkbLayout" "de"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/misc/psaux"
# Option "Device" "/dev/mouse"
Option "Buttons" "5"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 48.4
VertRefresh 50 - 70
Option "DPMS"

# === mode lines based on GTF ===
EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"


EndSection

# === ATI device section ===

Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4e50
Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"

Subsection "Display"
Depth 24
Modes "1200x800" "1024x768" "800x600"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"

# The Identifier line must be present
Identifier "Server Layout"


Screen "Screen0"


InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

MfG Ralix

[gentop]

Entfern doch bitte mal die ganzen Kommentare - da blickt man ja sonst nicht mehr durch...

//gentop

[Rüpel]

bei den ati-optionen in der xorg.conf hat sich einiges geändert.

der treiber schreibt warnungen dazu in die
/var/log/Xorg.0.log (oder so ähnlich)

ich hab für den neuen treiber meine alte xorg.conf gesichert, mit fglrxconfig eine neue generiert und dann von hand wieder zusammengeführt.
_________________
:wq

[Treborius]

ich find in deiner xorg.conf garkeine modline, bei mir hat 1280x800 auch nicht geklappt (amilo 1425 mit ati mobility 9700) du musst für die auflösung ne extra modline schreiben, ich wunder mich eh das es bei ner früheren version ohne geklappt hat, bin zZ auf arbeit ich poste meine xorg mal von zu Hause, oder du suchst alleine im inet, ich hab meine modline auch von google.de, alleine kommt man imho nicht auf die werte