| View previous topic :: View next topic |
| Author |
Message |
Pol
Tux's lil' helper
Joined: 01 May 2003
Posts: 113
|
 Posted: Mon Oct 17, 2005 9:27 am Post subject: [hylafax] Problème d'envoi et de reception |
 |
|
Bonjour tout le monde,
Je me présente, je travaille dans une boîte d'informatique en Belgique et je suis chargé d'installer un serveur de Fax.
Je travaille sous linux uniquement et j'ai pensé à Hylafax.
J'ai branché mon modem, tout est fonctionnel, le logiciel hylafax est reconnu, mais lorsque j'essaie de recevoir des fax, j'ai une belle erreur...
D'avance, je vous remercie de bien vouloir m'aider...
Voici mes fichiers de configuration ainsi qu'un fichier Log.
/var/spool/fax/etc/config.ttyS0
| Code: |
#
# Configuration for a Rockwell RC288DPi-based Class 1 modem.
# Hayes Optima 28800 firmware rev ???
# Microcom DeskPorte 28.8S firmware rev V1.100K-V34_DS
# PPI PM288FXMT firmware rev 1.57
#
# Note that the modem does not lock the line rate for fax
# receive (at least not the PM288FXMT); but not sure whether
# current flow control settings are maintained or if it
# switches to XON/XOFF (testing host was too fast to see).
#
#
CountryCode: 32
AreaCode: 65
FAXNumber: 601234
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules.europe
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0666
LogFileMode: 0600
DeviceMode: 0666
RingsBeforeAnswer: 1
SpeakerVolume: high
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "NothingSetup"
LogFacility: mail
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use this to supply a hint
ModemRate: 38400 # rate for DCE-DTE communication
ModemFlowControl: rtscts # default
#
ModemNoFlowCmd: AT&K0 # setup no flow control
ModemHardFlowCmd: AT&K3 # setup hardware flow control
ModemSoftFlowCmd: AT&K4 # setup software flow control
ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd: !Rockwell
ModemModelQueryCmd: !RC288DPi
ModemRevQueryCmd: ATI3 # product information
#
ModemDialCmd: ATDT%s # T for tone dialing
|
/var/spool/fax/etc/config
| Code: |
LogFacility: mail
CountryCode: 32
AreaCode: 65
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules.europe
ServerTracing: 1
|
/usr/lib/fax/hfaxd.conf
| Code: |
#
# HylaFAX Client-Server Protocol Configuration.
#
# Consult hfaxd(1M) for information on the contents
# of this file. Note that pathnames specified in
# this file are relative to the root of the spooling
# area because hfaxd uses chroot to confine client
# accesses to the server's filesystem.
#
LogFacility: mail # syslog facility (want this 1st))
ServerTracing: 0x001 # just server operation
#IdleTimeout: 900 # initial client idle timeout (secs)
#MaxIdleTimeout: 7200 # max client idle timeout (secs)
#MaxLoginAttempts: 5 # max # login attempts before disconnect
#MaxAdminAttempts: 5 # max # admin attempts before disconnect
#MaxConsecutiveBadCmds: 10 # max # invalid cmds before disconnect
#FaxContact: FaxMaster # who gets questions/complaints
#AdminGroup: faxadmin # which user group is admin (when using PAM)
#UserAccessFile: "/etc/hosts.hfaxd" # user+host access control file
#ShutdownFile: "/etc/shutdown" # server shutdown control filename
#XferLogFile: "/etc/clientlog" # for logging client file transfers
#FaxQFIFOName: "/FIFO" # FIFO name for talking to faxq process
#
# The default format used to return job status queries.
# Note that clients can override this with JOBFMT.
#
JobFmt: "%-3j %3i %1a %6.6o %-12.12e %5P %5D %7z %.25s"
#
# The default format used to return recvq status queries.
# Note that clients can override this with RCVFMT.
#
RcvFmt: "%-7m %4p%1z %-8.8o %14.14s %7t %f"
#
# The default format used to return modem status queries.
# Note that clients can override this with MODEMFMT.
#
ModemFmt: "Modem %m (%n): %s"
#
# The default format used to return file-oriented
# directory listings.
# Note that clients can override this with FILEFMT.
#
FileFmt: "%-7p %3l %8o %8s %-12.12m %.48f"
#
# SNPP-specific parameters.
#
#MaxMsgLength: 128 # max pager message length
#PagerIDMapFile: "/etc/pagermap" # file with pager ID mapping rules
#
# The following three items define the mapping from
# SNPP service level to job scheduling priority and
# expiration (kill) time. Each item should have a
# list of 12 values that define the mapping for service
# levels 0 through 11 (first item is level 0, second
# item level 1, ... etc.).
#
#PriorityMap: "63 127 127 127 127 127 127 127 127 127 127 127"
#RetryTimeMap: "30 60 60 180 0 0 0 0 0 0 0 0"
#KillTimeMap: " 5 5 5 15 60 240 720 1440 1440 1440 1440 1440"
|
/var/spool/fax/etc/setup.cache
| Code: |
# Warning, this file was automatically generated by faxsetup
# on Mon Oct 17 09:43:33 CEST 2005 for root
AWK='/bin/gawk'
BIN='/usr/bin'
CAT='/bin/cat'
CHGRP='/bin/chgrp'
CHMOD='/bin/chmod'
CHOWN='/bin/chown'
CP='/bin/cp'
DPSRIP='/var/spool/fax/bin/ps2fax'
ECHO='/bin/echo'
ENCODING='base64'
FAXQ_SERVER='yes'
FONTPATH='/usr/share/ghostscript/7.07/lib:/usr/share/fonts/default/ghostscript/:/usr/share/fonts:/usr/share/fonts/ttf/zh_TW:/usr/share/fonts/ttf/zh_CN:/usr/share/fonts/arphicfonts:/usr/share/fonts/ttf/korean/baekmuk:/usr/share/fonts/baekmuk-fonts:/usr/X11R6/lib/X11/fonts/truetype:/usr/share/fonts/kochi-substitute'
FUSER='/bin/fuser'
GREP='/bin/grep'
GSRIP='/usr/bin/gs'
HFAXD_OLD_PROTOCOL='no'
HFAXD_SERVER='yes'
HFAXD_SNPP_SERVER='no'
IMPRIP=''
LIBDATA='/usr/lib/fax'
LIBEXEC='/usr/sbin'
LN='/bin/ln'
MANDIR='/usr/share/man'
MIMENCODE='/usr/bin/mimencode'
MKFIFO='/bin/mkfifo'
MV='/bin/mv'
PATH='/usr/sbin:/bin:/usr/bin:/etc:/usr/local/bin'
PATHEGETTY='/bin/false'
PATHGETTY='/sbin/agetty'
PATHVGETTY='/bin/false'
PSPACKAGE='gs'
RM='/bin/rm'
SBIN='/usr/sbin'
SCRIPT_SH='/bin/bash'
SED='/bin/sed'
SENDMAIL='/usr/sbin/sendmail'
SPOOL='/var/spool/fax'
SYSVINIT=''
TARGET='i686-pc-linux-gnu'
TIFF2PDF='/usr/bin/tiff2pdf'
TIFFBIN='/usr/bin'
TTYCMD='/bin/tty'
UUCP_LOCKDIR='/var/lock'
UUCP_LOCKTYPE='ascii'
UUENCODE='/usr/bin/uuencode'
|
Mes démons lancé:
| Code: |
fujitsu1 ~ # ps ax | grep -i "fax"
23141 ? Ss 0:00 /usr/sbin/faxgetty /dev/ttyS0
10347 ? Ss 0:00 /usr/sbin/faxq
10349 ? Ss 0:00 /usr/sbin/hfaxd -i hylafax
10354 pts/9 R+ 0:00 grep -i fax
fujitsu1 ~ #
|
Messages de log:
| Code: |
Oct 17 10:58:32 fujitsu1 FaxQueuer[10347]: QUIT
Oct 17 10:58:34 fujitsu1 FaxQueuer[10489]: HylaFAX (tm) Version 4.2.2
Oct 17 10:58:34 fujitsu1 FaxQueuer[10489]: Copyright (c) 1990-1996 Sam Leffler
Oct 17 10:58:34 fujitsu1 FaxQueuer[10489]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
Oct 17 10:58:34 fujitsu1 FaxGetty[23141]: HELLO
Oct 17 10:58:34 fujitsu1 HylaFAX[10491]: HylaFAX INET Protocol Server: restarted.
|
Test de reception d'un fax (log complet)
| Code: |
Oct 17 10:41:22.99: [23141]: SESSION BEGIN 000000006 3265601234
Oct 17 10:41:22.99: [23141]: HylaFAX (tm) Version 4.2.2
Oct 17 10:41:22.99: [23141]: <-- [4:ATA\r]
Oct 17 10:41:28.30: [23141]: --> [7:CONNECT]
Oct 17 10:41:28.30: [23141]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Oct 17 10:41:28.30: [23141]: RECV FAX: begin
Oct 17 10:41:28.32: [23141]: <-- data [32]
Oct 17 10:41:28.32: [23141]: <-- data [2]
Oct 17 10:41:30.38: [23141]: --> [7:CONNECT]
Oct 17 10:41:30.38: [23141]: <-- data [23]
Oct 17 10:41:30.38: [23141]: <-- data [2]
Oct 17 10:41:31.19: [23141]: --> [7:CONNECT]
Oct 17 10:41:31.19: [23141]: <-- data [10]
Oct 17 10:41:31.19: [23141]: <-- data [2]
Oct 17 10:41:31.72: [23141]: --> [2:OK]
Oct 17 10:41:31.72: [23141]: <-- [9:AT+FRH=3\r]
Oct 17 10:41:32.58: [23141]: --> [7:CONNECT]
Oct 17 10:41:37.58: [23141]: <-- data [1]
Oct 17 10:41:37.63: [23141]: --> [2:]
Oct 17 10:41:37.63: [23141]: --> [2:OK]
Oct 17 10:41:37.63: [23141]: DELAY 1500 ms
Oct 17 10:41:39.13: [23141]: <-- [9:AT+FTH=3\r]
Oct 17 10:41:39.16: [23141]: --> [7:CONNECT]
Oct 17 10:41:39.16: [23141]: <-- data [32]
Oct 17 10:41:39.16: [23141]: <-- data [2]
Oct 17 10:41:41.03: [23141]: --> [7:CONNECT]
Oct 17 10:41:41.03: [23141]: <-- data [23]
Oct 17 10:41:41.04: [23141]: <-- data [2]
Oct 17 10:41:41.84: [23141]: --> [7:CONNECT]
Oct 17 10:41:41.84: [23141]: <-- data [10]
Oct 17 10:41:41.84: [23141]: <-- data [2]
Oct 17 10:41:42.33: [23141]: --> [2:OK]
Oct 17 10:41:42.33: [23141]: <-- [9:AT+FRH=3\r]
Oct 17 10:41:43.16: [23141]: --> [7:CONNECT]
Oct 17 10:41:48.16: [23141]: <-- data [1]
Oct 17 10:41:48.24: [23141]: --> [2:]
Oct 17 10:41:48.24: [23141]: --> [2:OK]
Oct 17 10:41:48.24: [23141]: DELAY 1500 ms
Oct 17 10:41:49.74: [23141]: <-- [9:AT+FTH=3\r]
Oct 17 10:41:49.77: [23141]: --> [7:CONNECT]
Oct 17 10:41:49.77: [23141]: <-- data [32]
Oct 17 10:41:49.77: [23141]: <-- data [2]
Oct 17 10:41:51.65: [23141]: --> [7:CONNECT]
Oct 17 10:41:51.65: [23141]: <-- data [23]
Oct 17 10:41:51.65: [23141]: <-- data [2]
Oct 17 10:41:52.45: [23141]: --> [7:CONNECT]
Oct 17 10:41:52.45: [23141]: <-- data [10]
Oct 17 10:41:52.45: [23141]: <-- data [2]
Oct 17 10:41:52.95: [23141]: --> [2:OK]
Oct 17 10:41:52.95: [23141]: <-- [9:AT+FRH=3\r]
Oct 17 10:41:53.78: [23141]: --> [7:CONNECT]
Oct 17 10:41:58.78: [23141]: <-- data [1]
Oct 17 10:41:58.85: [23141]: --> [2:]
Oct 17 10:41:58.85: [23141]: --> [2:OK]
Oct 17 10:41:58.85: [23141]: DELAY 1500 ms
Oct 17 10:42:00.35: [23141]: <-- [9:AT+FTH=3\r]
Oct 17 10:42:00.39: [23141]: --> [7:CONNECT]
Oct 17 10:42:00.39: [23141]: <-- data [32]
Oct 17 10:42:00.39: [23141]: <-- data [2]
Oct 17 10:42:02.26: [23141]: --> [7:CONNECT]
Oct 17 10:42:02.26: [23141]: <-- data [23]
Oct 17 10:42:02.26: [23141]: <-- data [2]
Oct 17 10:42:03.06: [23141]: --> [7:CONNECT]
Oct 17 10:42:03.06: [23141]: <-- data [10]
Oct 17 10:42:03.06: [23141]: <-- data [2]
Oct 17 10:42:03.56: [23141]: --> [2:OK]
Oct 17 10:42:03.56: [23141]: <-- [9:AT+FRH=3\r]
Oct 17 10:42:04.36: [23141]: --> [7:CONNECT]
Oct 17 10:42:09.36: [23141]: <-- data [1]
Oct 17 10:42:09.46: [23141]: --> [2:]
Oct 17 10:42:09.46: [23141]: --> [2:OK]
Oct 17 10:42:09.46: [23141]: RECV FAX: No answer (T.30 T1 timeout)
Oct 17 10:42:09.46: [23141]: RECV FAX: end
Oct 17 10:42:09.46: [23141]: SESSION END
|
Version des logiciels:
Gentoo:
| Code: |
Gentoo Base System version 1.12.0_pre9
Portage 2.0.53_rc5 (default-linux/x86/2005.1, gcc-3.4.4, glibc-2.3.5-r2, 2.6.13-gentoo-r3 i686)
=================================================================
System uname: 2.6.13-gentoo-r3 i686 Intel(R) Pentium(R) 4 CPU 2.93GHz
dev-lang/python: 2.3.5, 2.4.2
sys-apps/sandbox: 1.2.13
sys-devel/autoconf: 2.13, 2.59-r7
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1
sys-devel/binutils: 2.16.1
sys-devel/libtool: 1.5.20
virtual/os-headers: 2.6.11-r2
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/lib/fax /usr/lib/mozilla/defaults/pref /usr/share/config /var/qmail/control /var/spool/fax/etc"
CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/texmf/web2c /etc/env.d"
CXXFLAGS="-O2 -march=i686 -fomit-frame-pointer"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig ccache digest distlocks fixpackages sandbox sfperms strict"
GENTOO_MIRRORS="ftp://ftp.belnet.be/mirror/rsync.gentoo.org/gentoo"
LINGUAS="fr"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="x86 7zip X acl alsa apache2 apm arts authdaemond automount avi bash-completion berkdb bitmap-fonts bluetooth browserplugin bzip2 calendar cdparanoia cdr chroot cli courier crypt cups curl cyrus dba dbm dbus dvd dvdr dvdread eds effects emboss encode extras fam foomaticdb fortran ftp gd gdbm geoip gif gimp gimpprint gnutls gpm gtk gtk2 hal iconv imagemagick imap imlib ipv6 java javascript jpeg kde kerberos ldap libg++ libwww lm_sensors mad mailbox maildir mcal mikmod mmx mmx2 motif mozilla moznocompose moznoirc moznomail mp3 mpeg mpeg4 mplayer msn musicbrainz mysql ncurses netpbm nls nptl nptlonly nsplugin ogg oggvorbis opengl pam pcre pda pdflib pear perl php plugin png postfix postgres python qt quicktime readline samba sasl scanner sensord session sockets spell sqlite sse sse2 ssl svg svgz tcltk tcpd tetex tiff truetype truetype-fonts type1-fonts usb v4l v4l2 vorbis win32codecs winbind wmf wxwindows xinerama xml2 xmlrpc xsl xv xvid zeroconf zip zlib linguas_fr userland_GNU kernel_linux elibc_glibc"
Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS
|
Hylafax:
| Code: |
Oct 17 10:58:34 fujitsu1 FaxQueuer[10489]: HylaFAX (tm) Version 4.2.2
|
Voici les caractéristiques de mon modem:
| Code: |
fujitsu1 ~ # probemodem
Serial port that modem is connected to []? ttyS0
Now we are going to probe the tty port. This takes a few seconds,
so be patient. Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).
Probing for best speed to talk to modem: 38400 OK.
This looks like a Class 1 and 2 modem.
ATI0 RESULT = "OK" RESPONSE = "28800"
ATI1 RESULT = "OK" RESPONSE = "255"
ATI2 RESULT = "OK" RESPONSE = "OK"
ATI3 RESULT = "OK" RESPONSE = "V1.300-13-V34_DS"
ATI4 RESULT = "OK" RESPONSE = "a007040CA879CE02F"
ATI5 RESULT = "OK" RESPONSE = "(c) 1993,94,95 Supra Corporation"
ATI6 RESULT = "OK" RESPONSE = "022 US 011"
ATI7 RESULT = "OK" RESPONSE = "RC288DPi Rev 05BA"
ATI8 RESULT = "ERROR" RESPONSE = "ERROR"
ATI9 RESULT = "OK" RESPONSE = "($SUP1200\MODEM\SupraFAXModem 288B1)"
Class 1 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "OK" RESPONSE = "0-4"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAE=? RESULT = "OK" RESPONSE = "0-4"
AT+FAE? RESULT = "OK" RESPONSE = "0"
AT+FTH=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRH=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTM=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=? RESULT = "OK" RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTS=? RESULT = "OK" RESPONSE = "0-255"
AT+FRS=? RESULT = "OK" RESPONSE = "0-255"
Class 2 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=2 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "OK" RESPONSE = "0-4"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAXERR=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAXERR? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBADLIN=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBADLIN? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBADMUL=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBADMUL? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBOR=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBOR? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBUF=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBUF? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBUG=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBUG? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FCIG=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FCIG? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FCQ=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FCQ? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FCR=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FCR? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTBC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTBC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDCC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDCC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDCS=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDCS? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDIS=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDIS? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDT=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDT? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FECM=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FECM? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FET=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FET? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FLID=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FLID? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FLNFC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FLNFC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FLPL=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FLPL? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FMDL? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FMFR? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FMINSP=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FMINSP? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FPHCTO=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FPHCTO? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FPTS=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FPTS? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FRBC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FRBC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FREL=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FREL? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FREV? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FSPL=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FSPL? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTBC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTBC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FVRFC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FVRFC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FWDFC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FWDFC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FK=? RESULT = "ERROR" RESPONSE = "ERROR"
|
Voila j'espère que ca pourra vous aider à comprendre le problème...
J'ai lu une documentation pour mettre en place ce serveur, la voici: https://forums.gentoo.org/viewtopic-t-376591-highlight-hylafax.html
Mais j'ai des problèmes lorsque je teste la commande sendfax...
| Code: |
fujitsu1 etc # sendfax -vv -d 601231 /fax.txt
sendfax: no files to send
usage: sendfax [options] <fax-number> <page(s) in g3-format>
valid options: -p, -v, -l <device(s)>, -x <debug>, -n, -S, -r, -D <x>
|
Bizarre non ?
Enfin, voila, toute aide est la bienvenue... merci  |
|
| Back to top |
|
 |
marvin rouge
Veteran
Joined: 01 Aug 2004
Posts: 1422
Location: Villa Lumierrante, Zonelibre
|
| Posted: Mon Oct 17, 2005 9:30 am Post subject: |
|
|
| Quote: | fujitsu1 etc # sendfax -vv -d 601231 /fax.txt
sendfax: no files to send |
C'est une erreur de typo, ou tu as vraiment un fichier fax.txt à la racine de ton installation ?
+ |
|
| Back to top |
|
|
Pol
Tux's lil' helper
Joined: 01 May 2003
Posts: 113
|
| Posted: Mon Oct 17, 2005 9:32 am Post subject: |
|
|
| marvin rouge wrote: | | Code: | fujitsu1 etc # sendfax -vv -d 601231 /fax.txt
sendfax: no files to send |
C'est une erreur de typo, ou tu as vraiment un fichier fax.txt à la racine de ton installation ?
+ |
non ce n'est pas une erreur, j'ai un bête fichier texte à la racine de mon disque, c'est juste pour aller plus vite quand je fais mes test...
| Code: |
fujitsu1 fax # cat /fax.txt
Test du fax
fujitsu1 fax #
|
|
|
| Back to top |
|
|
marvin rouge
Veteran
Joined: 01 Aug 2004
Posts: 1422
Location: Villa Lumierrante, Zonelibre
|
| Posted: Mon Oct 17, 2005 9:37 am Post subject: |
|
|
désolé, ça aurait pu etre une erreur "evidente" qui m'arrive assez souvent ... et donc c'etait juste pour vérifier.
+ |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
