/dev/video missing

[sloof3]

After I finally getting my Kfir MPEG II PCI Encoder Card driver load, I have to figure out how to use it.
Here is what I have loaded:

kfir 214272 0
saa7113 4608 0
i2c_algo_bit 8584 1 kfir
i2c_core 17552 3 kfir,saa7113,i2c_algo_bit
firmware_class 7936 1 kfir
videodev 7424 1 kfir

I have no /dev/video. I'm using kernel 2.6.14-ck5. udevmonitor shows me this:
udevmonitor prints the received event from the kernel [UEVENT]
and the event which udev sends out after rule processing [UDEV]

UEVENT[1132543209.846739] add@/module/videodev
UDEV [1132543209.879138] add@/module/videodev
UEVENT[1132543209.926772] add@/module/firmware_class
UDEV [1132543209.953450] add@/module/firmware_class
UEVENT[1132543209.997666] add@/module/i2c_core
UDEV [1132543210.023276] add@/module/i2c_core
UEVENT[1132543210.024747] add@/bus/i2c/drivers/i2c_adapter
UDEV [1132543210.052819] add@/bus/i2c/drivers/i2c_adapter
UEVENT[1132543210.057400] add@/module/i2c_algo_bit
UDEV [1132543210.101799] add@/module/i2c_algo_bit
UEVENT[1132543210.164675] add@/module/saa7113
UDEV [1132543210.196991] add@/module/saa7113
UEVENT[1132543210.198454] add@/bus/i2c/drivers/SAA7113
UDEV [1132543210.224796] add@/bus/i2c/drivers/SAA7113
UEVENT[1132543210.295601] add@/module/kfir
UDEV [1132543210.321217] add@/module/kfir
UEVENT[1132543210.322692] add@/bus/pci/drivers/kfir
UDEV [1132543210.348900] add@/bus/pci/drivers/kfir

dmesg:

Nov 20 22:20:09 [kernel] Linux video capture interface: v1.00
Nov 20 22:20:10 [kernel] saa7113: init_module


Kernel .config:

CONFIG_VIDEO_DEV=m

lspci -v:

02:05.0 Multimedia controller: Visiontech Ltd Unknown device 9000
Subsystem: Visiontech Ltd Unknown device 9000
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 9
Memory at ff9ff000 (32-bit, non-prefetchable) [size=4K]
Memory at ff9c0000 (32-bit, non-prefetchable) [size=128K]
Memory at eeae0000 (32-bit, prefetchable) [size=128K]
Memory at ff9a0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [40] Power Management version 1

Thanks for your help and if you need more information just ask.
--sloof3

[Headrush]

Try /dev/v4l/video0

[sloof3]

Meant to mention it but didn't, no /dev/v4l/ either.

-sloof3

[Headrush]

Please post the entire lsmod output.

Probably missing v4l support in kernel.

[sloof3]

lsmod:

Module Size Used by
kfir 214272 0
saa7113 4608 0
i2c_algo_bit 8584 1 kfir
i2c_core 17552 3 kfir,saa7113,i2c_algo_bit
firmware_class 7936 1 kfir
videodev 7424 1 kfir
vmnet 27300 9
vmmon 167852 0
snd_seq_midi 6944 0
snd_emu10k1_synth 6912 0
snd_emux_synth 34688 1 snd_emu10k1_synth
snd_seq_virmidi 5888 1 snd_emux_synth
snd_seq_midi_emul 6912 1 snd_emux_synth
emu10k1_gp 2944 0
gameport 11400 2 emu10k1_gp
snd_emu10k1 114980 2 snd_emu10k1_synth
snd_rawmidi 20512 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
snd_ac97_codec 90876 1 snd_emu10k1
snd_ac97_bus 1920 1 snd_ac97_codec
snd_util_mem 3456 2 snd_emux_synth,snd_emu10k1
snd_hwdep 7072 2 snd_emux_synth,snd_emu10k1
fglrx 252320 7

Like I said in the way of v4l all I have selected in the kernel is the module support for v4l:
CONFIG_VIDEO_DEV=m

Device Driver -->
Multimedia Devices -->
(M) Video For Linux

As far as I2C:
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_ALGOBIT=m

Thanks