| View previous topic :: View next topic |
| Author |
Message |
GLS064
Apprentice
Joined: 21 Nov 2005
Posts: 175
Location: Braunschweig,Germany
|
 Posted: Sun Nov 27, 2005 12:55 pm Post subject: [solved]Unable to connect with NetGear DG834GTB Router |
 |
|
I finally got my Wireless Stick tu run with linux. Now I am unable to connect to the router. I don not know why.
My wpa_supplicant.conf looks like this :
| Code: |
ctrl_interface=/var/run/wpa_supplicant
ap_scan=1
network={
ssid="NETGEAR"
scan_ssid=1
psk="my_key"
key_mgmt=WPA-PSK
pairwise=TKIP
group=TKIP
proto=WPA
}
|
my /etc/conf.d/net look like this :
| Code: |
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d. To create a more complete configuration,
# please review /etc/conf.d/net.example and save your configuration
# in /etc/conf.d/net (this file :]!).
modules=("wpa_supplicant")
wpa_supplicant_wlan0="-Dndiswrapper"
wpa_timeout_wlan0=20
ifconfig_wlan0=("dhcp")
dhcp_wlan0=("nodns nontp nonis")
|
and I also run wpa_supplicant -Dndiswrapper -iwlan0 -c/etc/wpa_supplicant.conf -dd
The output was :
| Code: |
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'ndiswrapper'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ap_scan=1
Line: 4 - start of a new network block
ssid - hexdump_ascii(len=7):
4e 45 54 47 45 41 52 NETGEAR
scan_ssid=1 (0x1)
PSK (ASCII passphrase) - hexdump_ascii(len=26): [REMOVED]
key_mgmt: 0x2
pairwise: 0x8
group: 0x8
proto: 0x1
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
id=0 ssid='NETGEAR'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:0f:b5:ba:d4:02
Setting scan request: 0 sec 100000 usec
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=7):
4e 45 54 47 45 41 52 NETGEAR
Failed to initiate AP scan.
Setting scan request: 10 sec 0 usec
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Scan timeout - try to get results
Received 224 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0f:b5:7c:b6:1c ssid='' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Starting AP scan (broadcast SSID)
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Scan timeout - try to get results
Received 287 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0f:b5:7c:b6:1c ssid='' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
No suitable AP found.
Setting scan request: 5 sec 0 usec
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=7):
4e 45 54 47 45 41 52 NETGEAR
Failed to initiate AP scan.
Setting scan request: 10 sec 0 usec
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Scan timeout - try to get results
Received 287 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0f:b5:7c:b6:1c ssid='' wpa_ie_len=0 rsn_ie_len=0
skip - no WPA/RSN IE
No suitable AP found.
|
It always says no suitable AP found, but the MAC Adress 00:0F:B5:7C:B6:1C is the adress of the router. Do I have also to configure the
router for linux ? It is set on WPA-PSK with TKIP.
Bodo
_________________
Gruss / Greetings Bodo
Last edited by GLS064 on Sun Nov 27, 2005 10:40 pm; edited 1 time in total |
|
| Back to top |
|
 |
GLS064
Apprentice
Joined: 21 Nov 2005
Posts: 175
Location: Braunschweig,Germany
|
| Posted: Sun Nov 27, 2005 2:05 pm Post subject: |
|
|
ok, now he finds the router, but the handshaking with the router will not work :
| Code: |
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Scan timeout - try to get results
Received 287 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 0
0: 00:0f:b5:7c:b6:1c ssid='NETGEAR' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
selected based on WPA IE
Trying to associate with 00:0f:b5:7c:b6:1c (SSID='NETGEAR' freq=2437 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
State: SCANNING -> ASSOCIATING
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
RX EAPOL from 00:0f:b5:7c:b6:1c
RX EAPOL - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00 00 00 01 e6 fb 92 93 dd c8 bd 3a 39 a3 f0 fc 12 c8 8d e3 20 15 c2 06 d1 59 c6 12 31 12 75 65 eb ca a4 ab 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Setting authentication timeout: 10 sec 0 usec
IEEE 802.1X RX: version=1 type=3 length=95
EAPOL-Key type=254
WPA: RX EAPOL-Key - hexdump(len=99): 01 03 00 5f fe 00 89 00 20 00 00 00 00 00 00 00 01 e6 fb 92 93 dd c8 bd 3a 39 a3 f0 fc 12 c8 8d e3 20 15 c2 06 d1 59 c6 12 31 12 75 65 eb ca a4 ab 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
State: ASSOCIATING -> 4WAY_HANDSHAKE
WPA: RX message 1 of 4-Way Handshake from 00:0f:b5:7c:b6:1c (ver=1)
WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: Renewed SNonce - hexdump(len=32): 70 9a fe d1 3f c8 77 07 41 f8 a9 e1 41 a8 bb 80 0f 36 b4 bb 95 ed d3 ba c4 42 7d ec 2f a2 b4 96
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: Sending EAPOL-Key 2/4
WPA: TX EAPOL-Key - hexdump(len=123): 01 03 00 77 fe 01 09 00 20 00 00 00 00 00 00 00 01 70 9a fe d1 3f c8 77 07 41 f8 a9 e1 41 a8 bb 80 0f 36 b4 bb 95 ed d3 ba c4 42 7d ec 2f a2 b4 96 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 44 5a 87 6d b0 80 ed 27 e2 78 8c 0e 85 f3 b2 f4 00 18 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
WPA: 4-Way Handshake failed - pre-shared key may be incorrect
Setting scan request: 0 sec 100000 usec
Added BSSID 00:00:00:00:00:00 into blacklist
State: 4WAY_HANDSHAKE -> DISCONNECTED
|
the key is right . Any suggestion ?
_________________
Gruss / Greetings Bodo |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
