| View previous topic :: View next topic |
| Author |
Message |
wrtlprnft
n00b
Joined: 08 Jun 2005
Posts: 21
|
 Posted: Sat Dec 03, 2005 5:34 pm Post subject: TI-84 Plus |
 |
|
Ich besitze einen TI-84 plus und wollte ihn mit meinem Rechner verbinden (Kernel 2.6.14).
Etwas gegooglet und bin auf diese Seite gestoßen.
Mir ist es allerdings nicht gelungen, das Modul in der Kernel- Konfiguration zu finden (Ich hab unter Device Drivers/USB support nachgeschaut und auch nach "tiusb" gesucht). Wenn ich trotzdem tilp emerge und (als Normaluser starte) bekomme ich folgende Ausgabe: | Code: | tilp : TiLP - Version 6.76, (C) 1999-2004 Romain Lievin <roms@tilp.info>
tilp : THIS PROGRAM COMES WITH ABSOLUTELY NO WARRANTY
tilp : PLEASE READ THE DOCUMENTATION FOR DETAILS
tilp : built on Dec 3 2005 11:00:27
tilp : initialized in command line mode.
tilp : Configuration file not found, use default values. You can create one by the 'File|Save config' command menu.
tilp : err: msg_box: Information, Configuration file not found, use default values. You can create one by the 'File|Save config' command menu.
tilp : setlocale: <de_DE@euro>
tilp : bindtextdomain: </usr/share/locale/>
tilp : textdomain: <tilp>
ticables: ticables library version 3.8.6
ticables: setlocale: <de_DE@euro>
ticables: bindtextdomain: </usr/share/locale>
ticables: textdomain: <libticables>
ticables: built for __LINUX__ target.
ticables: checking resources:
ticables: IO_API: found at compile time (HAVE_TERMIOS_H)
ticables: IO_ASM: found at compile time (HAVE_ASM_IO_H).
ticables: IO_TIPAR: found at compile time (HAVE_LINUX_TICABLE_H)
ticables: IO_TISER: found at compile time (HAVE_LINUX_TICABLE_H)
ticables: IO_TIUSB: not found at compile time (HAVE_LINUX_TIGLUSB_H)
ticables: IO_LIBUSB: not found at compile time (HAVE_LIBUSB)
ticables: quick search for parallel/serial ports:
ticables: serial port found at 0x3f8
ticables: search for all ports:
ticables: err: Unable to open '/proc/sys/dev/parport/'.
ticables: getting method from resources (automatic):
ticables: check for tty usability:
ticables: node /dev/ttyS0: exists
ticables: permissions/user/group: -rw-rw---- root tty
ticables: is user can r/w on device: no
ticables: are others can r/w on device: no
ticables: is the user 'mathias' in the group 'tty': yes
ticables: mapping I/O...
ticables: registering cable...
ticables: list of settings:
ticables: cable: GrayLink
ticables: port: serial port #2
ticables: method: direct access (api)
ticables: device name: /dev/ttyS1
ticables: delay value: 10
tifiles : tifiles library version 0.6.1
tifiles : setlocale: <de_DE@euro>
tifiles : bindtextdomain: </usr/share/locale>
tifiles : textdomain: <libtifiles>
tifiles : settings:
tifiles : calc type: TI92
ticalcs : ticalcs library version 4.5.5
ticalcs : setlocale: <de_DE@euro>
ticalcs : bindtextdomain: </usr/share/locale>
ticalcs : textdomain: <libticalcs>
tifiles : settings:
tifiles : calc type: TI92
ticalcs : settings:
ticalcs : calc type: TI92
tilp : initialized in GTK+ mode.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_get_idlist1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_treeview2_button_press_event'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_about1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_upgrade_os1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_tilp_button8_clicked'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_tilp_button6_clicked'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_hpaned1_size_request'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_ti_frorg1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_external_programs1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_tilp_button4_clicked'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_treeview1_drag_data_get'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_communication1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_tilp_dbox_destroy'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_treeview1_drag_begin'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_tinewsnet1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_treeview2_drag_data_received'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_tilp_button11_clicked'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_clock1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_default_config1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_treeview1_button_release_event'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_treeview2_drag_begin'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_ticalcorg1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_rom_dump1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_treeview1_button_press_event'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_treeview2_key_press_event'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_tilp_button9_clicked'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_bug_report1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_remote1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_treeview2_drag_data_get'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_tilp_button7_clicked'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_reload_config1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_log1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_general1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_treeview1_drag_data_received'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_manual1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_tilp_button12_clicked'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_open1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_tilp_s_web_site1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_the_lpg1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_calculator_software1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_manpage1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_ti_s_web_site1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_tilp_button10_clicked'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_quit1_activate'.
(tilp:19342): libglade-WARNING **: could not find signal handler 'on_save_config1_activate'. |
Es kommt trotz aller Warnungen das Hauptfenster von TiLP, aber die Buttons und die Menuleiste sind vollkommen ohne Wirkung (Wenn ich auf Setup und dann auf Communication klicke passiert gar nichts).
Wenn ich das Fenster wieder schließe verschwindet es zwar, aber ich muss das Programm mit CRTL-C killen, um wieder einen Konsolenprompt zu bekommen.
Was habe ich da falsch gemacht? |
|
| Back to top |
|
 |
schmutzfinger
Veteran
Joined: 26 Oct 2003
Posts: 1287
Location: Dresden/Germany
|
| Posted: Sat Dec 03, 2005 5:56 pm Post subject: |
|
|
Das tilp im portage ist uralt und du solltest vielleicht mal tilp2 probieren. Hier findest du ebuilds für tilp2 und die libs. https://bugs.gentoo.org/show_bug.cgi?id=109220
In aktuellen Kernen gibt es das Modul nichtmehr, die neuen libs können das auch ohne kernelmodul. |
|
| Back to top |
|
|
wrtlprnft
n00b
Joined: 08 Jun 2005
Posts: 21
|
| Posted: Sat Dec 03, 2005 6:45 pm Post subject: |
|
|
Danke für die Hilfe!
Jetzt hab ich alles emerged, wenn ich aber das Programm starte und versuche, es mit dem Taschenrechner zu verbinden sagt es: | Quote: | Msg: illegal operation or argument.
Cause: the program which uses this library is buggy. Fire-up the developer ! |
Auf der Konsole kommt dann: | Code: | tilp-INFO: msg_box: Fehler, Msg: illegal operation or argument.
Cause: the program which uses this library is buggy. Fire-up the developer !
ticables-INFO: Check for lib-usb usability:
ticables-INFO: usb filesystem (/proc/bus/usb): mounted
ticables-INFO: node /proc/bus/usb/devices: exists
ticables-INFO: permissions/user/group: -r--r--r-- root root
ticables-INFO: is user can r/w on device: no
ticables-INFO: are others can r/w on device: no
ticables-INFO: is the user '<username>' in the group 'root': no
ticables-INFO: => you should add your username at the group 'root' in '/etc/group'
ticables-INFO: => you will have to restart you session, too
ticables-INFO: Check for lib-usb usability:
ticables-INFO: usb filesystem (/proc/bus/usb): mounted
ticables-INFO: node /proc/bus/usb/devices: exists
ticables-INFO: permissions/user/group: -r--r--r-- root root
ticables-INFO: is user can r/w on device: no
ticables-INFO: are others can r/w on device: no
ticables-INFO: is the user '<username>' in the group 'root': no
ticables-INFO: => you should add your username at the group 'root' in '/etc/group'
ticables-INFO: => you will have to restart you session, too |
Wenn ich das Programm als root starte: | Quote: | Msg: illegal operation or argument.
Cause: the program which uses this library is buggy. Fire-up the developer !
System: Unpassender IOCTL (I/O-Control) für das Gerät (errno = 25) |
Auf der Konsole: | Code: | ticables-INFO: Check for lib-usb usability:
ticables-INFO: usb filesystem (/proc/bus/usb): mounted
ticables-INFO: node /proc/bus/usb/devices: exists
ticables-INFO: permissions/user/group: -r--r--r-- root root
ticables-INFO: is user can r/w on device: yes
ticables-INFO: Check for lib-usb usability:
ticables-INFO: usb filesystem (/proc/bus/usb): mounted
ticables-INFO: node /proc/bus/usb/devices: exists
ticables-INFO: permissions/user/group: -r--r--r-- root root
ticables-INFO: is user can r/w on device: yes |
Dann ändert sich die linke Spalte vom Hauptfenster, es sind ein paar mehr Einträge drin. Wenn ich auf einen der Buttons klicke kommt eine Dialogbox, die nur "Test" sagt...
Übrigens kommt in dmesg: | Code: | usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-1: device descriptor read/64, error -71 |
Hat dieser Fehler eine Bedeutung? |
|
| Back to top |
|
|
schmutzfinger
Veteran
Joined: 26 Oct 2003
Posts: 1287
Location: Dresden/Germany
|
| Posted: Sat Dec 03, 2005 8:55 pm Post subject: |
|
|
| Tilp2 und die libs sind noch relativ buggy, genau wie das da steht. Bei mir gehts so einigermassen schmiert aber auch schonmal mit segfault ab. Ich habe ein serielles Kabel und kein USB und kann dir da nicht helfen. Die dmesg Sache kann dir egal sein und mit dem Rest solltest du dich an die Entwickler wenden (Bugtracker bei sourceforge). Mit gentoo hat das nix zu tun und hier im Forum nutzen das wohl die wenigsten. |
|
| Back to top |
|
|
|
Deutsches Forum (German)
