carpman
Advocate
Joined: 20 Jun 2002
Posts: 2202
Location: London - UK
|
 Posted: Wed Dec 07, 2005 10:54 am Post subject: pcmcia broken |
 |
|
Hello, not sure when as don't use it that often but pcmcia has stopped working, dmesg reports
| Code: |
Yenta: CardBus bridge found at 0000:00:0a.0 [1033:8218]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x002c1222, devctl 0x66
Yenta: ISA IRQ mask 0x0848, PCI irq 10
Socket status: 30000086
Intel ISA PCIC probe: not found.
Device 'i82365.0' does not have a release() function, it is broken and must be fixed.
Badness in device_release at drivers/base/core.c:83
[<c02db7ba>] kobject_cleanup+0x9a/0xa0
[<c02db7c0>] kobject_release+0x0/0x10
[<c02dc20d>] kref_put+0x3d/0x90
[<c02db7ee>] kobject_put+0x1e/0x30
[<c02db7ee>] kobject_put+0x1e/0x30
[<c02db7c0>] kobject_release+0x0/0x10
[<c0613429>] init_i82365+0x1b9/0x1d0
[<c05f0914>] do_initcalls+0x54/0xd0
[<c01002a0>] init+0x0/0x170
[<c01002a0>] init+0x0/0x170
[<c01002cf>] init+0x2f/0x170
[<c0101394>] kernel_thread_helper+0x0/0xc
[<c0101399>] kernel_thread_helper+0x5/0xc
|
It was working ok but something seems to have broken it?
lspci -v
| Code: |
CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller (rev 02)
Subsystem: NEC Corporation Unknown device 8218
Flags: bus master, medium devsel, latency 168, IRQ 10
Memory at ec008000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: 32000000-33fff000
I/O window 0: 00001c00-00001cff
I/O window 1: 00002000-000020ff
16-bit legacy interface ports at 0001
|
many thanks
_________________
Work Station - 64bit
Gigabyte GA X48-DQ6 Core2duo E8400
8GB GSkill DDR2-1066
SATA Areca 1210 Raid
BFG OC2 8800 GTS 640mb
--------------------------------
Notebook
Samsung Q45 7100 4gb |
|
Kernel & Hardware
