| View previous topic :: View next topic |
| Author |
Message |
Steve S.
Tux's lil' helper
Joined: 22 Sep 2005
Posts: 131
|
 Posted: Sat Dec 03, 2005 9:00 pm Post subject: CD Burn problem [SOLVED] |
 |
|
When I try to burn a data cd I get this error log:
| Code: | cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: OPC failed.
cmd finished after 60.153s timeout 60s
status: 0x4 (CONDITION MET/GOOD)
CDB: 54 01 00 00 00 00 00 00 00 00
cdrecord: Success. send opc: scsi sendcmd: no error
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
SCSI buffer size: 64512
Linux sg driver version: 3.5.27
Warning: Open by 'devname' is unintentional and not supported.
scsibus: -2 target: -2 lun: -2
devname: '/dev/hdd'
scsidev: '/dev/hdd'
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: Warning: Running on Linux-2.6.12-gentoo-r6
cdrecord: Continuing in 5 seconds...
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Asuming -tao mode.
cdrecord: No write mode specified. |
Any ideas anyone?
The method I used was in gnome, via the gui.
Last edited by Steve S. on Thu Dec 08, 2005 12:48 am; edited 1 time in total |
|
| Back to top |
|
 |
Steve S.
Tux's lil' helper
Joined: 22 Sep 2005
Posts: 131
|
| Posted: Sun Dec 04, 2005 1:52 am Post subject: |
|
|
| If I'm not providing enough information, please tell me what I can add to the post to help figure out why I have as yet been unable to burn cd's. |
|
| Back to top |
|
|
Steve S.
Tux's lil' helper
Joined: 22 Sep 2005
Posts: 131
|
| Posted: Sun Dec 04, 2005 2:41 am Post subject: |
|
|
All right, I may be the only one reading this, but if someone else happens uppon it willing to help, perhaps this info will be further useful.
When I type in | Quote: | | cdrecord dev=target |
it prints
| Code: | cdrecord: No tracks specified. Need at least one.
Usage: cdrecord [options] track1...trackn
|
|
|
| Back to top |
|
|
Steve S.
Tux's lil' helper
Joined: 22 Sep 2005
Posts: 131
|
| Posted: Sun Dec 04, 2005 3:05 am Post subject: |
|
|
To continue on, when I run | Quote: | | nautilus-cd-burner |
I continually get "Insert Blank Cd: Retry?" no matter how many new cd's I go through. |
|
| Back to top |
|
|
Steve S.
Tux's lil' helper
Joined: 22 Sep 2005
Posts: 131
|
| Posted: Mon Dec 05, 2005 3:14 am Post subject: |
|
|
All right, hope someone reads this that has some input on the issue.
Here is something else that I have done:
I added
| Code: | | /dev/hdd /mnt/cdrw iso9660 noauto,rw 0 0 |
to my /etc/fstab
Then I
At one point I emerged graveman, so now I ran it so that I could burn a data cd.
I ran it, and it said | Quote: | | /usr/bin/mkisofs: No such file or directory. Invalid node - (null) |
Once again, I have also run the gui version of the cd burner and have been unsuccessful.
I do not know the command line option and would use it, but am still wondering why I can't get the gui to work.
...please help. |
|
| Back to top |
|
|
dwblas
Guru
Joined: 14 Jul 2003
Posts: 525
Location: Southern California (No jokes please)
|
| Posted: Mon Dec 05, 2005 3:23 am Post subject: |
|
|
| Quote: | scsibus: -2 target: -2 lun: -2
devname: '/dev/hdd'
scsidev: '/dev/hdd' |
I think it may be these lines. If hdd is your 2nd cd drive, then it would be 0, 1, 0. With burncenter the only way it will work is if the device is set to ATAPI:0,0,0 for the first cd drive or ATAPI:0,1,0 for the 2nd. Try changing the device in the gui setup and if that doesn't help, post back. |
|
| Back to top |
|
|
Steve S.
Tux's lil' helper
Joined: 22 Sep 2005
Posts: 131
|
| Posted: Mon Dec 05, 2005 3:40 am Post subject: |
|
|
Thanks so much for the response...
I think you may have hit the nail on the head: changing the device in the gui setting. In nooby terminology, how exactly do I do that? And what do I change it to from what?
It is my second drive (the first one is the cdrom), and I didn't get what a lot of the ATAPI stuff was that you commented on either. Sorry; I"m learning but ain't there yet...  |
|
| Back to top |
|
|
dwblas
Guru
Joined: 14 Jul 2003
Posts: 525
Location: Southern California (No jokes please)
|
| Posted: Mon Dec 05, 2005 4:41 am Post subject: |
|
|
| There should be a configure or setup option in one of the menus of the gui. You want to change the dev option. Also, you can look in obvious places like home and /etc for a config file that can be changed. If all else fails you can unmerge and then emerge again and it should enter setup mode when you first start it but that is drastic. |
|
| Back to top |
|
|
piewie
Guru
Joined: 26 Sep 2002
Posts: 494
Location: old Europe
|
| Posted: Mon Dec 05, 2005 10:06 am Post subject: |
|
|
| dwblas wrote: | | If hdd is your 2nd cd drive, then it would be |
0,1,1 should be Slave on Secondary Port
cdrecord dev=ATA --scanbus is also informative |
|
| Back to top |
|
|
Steve S.
Tux's lil' helper
Joined: 22 Sep 2005
Posts: 131
|
| Posted: Mon Dec 05, 2005 12:19 pm Post subject: |
|
|
| Quote: | | 0,1,1 should be Slave on Secondary Port |
It is slave on Secondary port, but what is the "0,1,1?" Is that how it should be in /etc/fstab? Is that what you mean?
| Quote: | | There should be a configure or setup option in one of the menus of the gui. You want to change the dev option. Also, you can look in obvious places like home and /etc for a config file that can be changed. |
...I'll look, but does anyone know specifically where this might be at in gnome? |
|
| Back to top |
|
|
piewie
Guru
Joined: 26 Sep 2002
Posts: 494
Location: old Europe
|
| Posted: Mon Dec 05, 2005 8:53 pm Post subject: |
|
|
0,1,1 is the device number for cdrecord:
cdrecord dev=ATA:0,1,1 .... |
|
| Back to top |
|
|
Steve S.
Tux's lil' helper
Joined: 22 Sep 2005
Posts: 131
|
| Posted: Mon Dec 05, 2005 9:39 pm Post subject: |
|
|
All right, still trying to understand this. I checked out a couple of sources that recomended running , so I did, but that produced | Quote: | Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J\uffffrg Schilling
cdrecord: Warning: Running on Linux-2.6.12-gentoo-r6
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
|
I haven't the slightest clue what that means. Does anyone else? What am I missing? Have as yet been unable to find the settup for the gui, but I'll keep looking. |
|
| Back to top |
|
|
piewie
Guru
Joined: 26 Sep 2002
Posts: 494
Location: old Europe
|
| Posted: Mon Dec 05, 2005 10:43 pm Post subject: |
|
|
cdrecord dev=ATA --scanbus
without the dev option only the scsi bus will be scanned |
|
| Back to top |
|
|
Steve S.
Tux's lil' helper
Joined: 22 Sep 2005
Posts: 131
|
| Posted: Tue Dec 06, 2005 2:40 am Post subject: |
|
|
| piewie wrote: | cdrecord dev=ATA --scanbus
without the dev option only the scsi bus will be scanned |
Thanks!
Ok, that produces this:
| Code: | Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J\uffffrg Schilling
cdrecord: Warning: Running on Linux-2.6.12-gentoo-r6
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
scsibus1:
1,0,0 100) 'BCD ' 'E520C ' '0.49' Removable CD-ROM
1,1,0 101) 'CDWRITER' 'IDE2410 ' 'A.23' Removable CD-ROM
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
|
does that help us any? |
|
| Back to top |
|
|
piewie
Guru
Joined: 26 Sep 2002
Posts: 494
Location: old Europe
|
| Posted: Tue Dec 06, 2005 8:24 am Post subject: |
|
|
first try to burn an an excisting iso image as root:
# cdrecord -v dev=ATA:1,1,0 -dao driveropts=burnfree -data foo.iso
and post the full output if an error occurs. |
|
| Back to top |
|
|
Steve S.
Tux's lil' helper
Joined: 22 Sep 2005
Posts: 131
|
| Posted: Wed Dec 07, 2005 2:44 am Post subject: |
|
|
| Code: | Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J\uffffrg Schilling
cdrecord: Warning: Running on Linux-2.6.12-gentoo-r6
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
TOC Type: 1 = CD-ROM
scsidev: 'ATA:1,1,0'
devname: 'ATA'
scsibus: 1 target: 1 lun: 0
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'CDWRITER'
Identifikation : 'IDE2410 '
Revision : 'A.23'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Profile: 0x0002 (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
FIFO size : 4194304 = 4096 KB
Track 01: data 612 MB
Total size: 702 MB (69:38.25) = 313369 sectors
Lout start: 703 MB (69:40/19) = 313369 sectors
cdrecord: Success. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 200s
cdrecord: No disk / Wrong disk!
|
So, am I simply using the wrong disk? It's brand new, CD-R out of the box, Imation brand. I did it under a user via su -. |
|
| Back to top |
|
|
piewie
Guru
Joined: 26 Sep 2002
Posts: 494
Location: old Europe
|
| Posted: Wed Dec 07, 2005 8:42 am Post subject: |
|
|
post also the used cdrecord command
ok, some points to start:
change cd blank manufacturer (compare the output of: cdrecord dev=ATA:1,1,0 -atip)
update firmware
change cable
change position of drive: alone, Master/Slave
try another drive if possible
try knoppix if burning is working
check log files for something like "hdd" and "lost interrupt"
search google for the error message
search in mailing.comp.cdwrite
post in mailing.comp.cdwrite:
- linux kernel version
- linux distribution
- excact cdrecord version
- burning as root
- post the used command
- post the complete output |
|
| Back to top |
|
|
Steve S.
Tux's lil' helper
Joined: 22 Sep 2005
Posts: 131
|
| Posted: Thu Dec 08, 2005 12:39 am Post subject: |
|
|
Thanks for all the help, Piewie. I must say it is very encouraging to have someone in the know like yourself helping out those not quite in the loop yet.
But, I cheated: I think it was a cdrw and cd incompatability problem. I put in another cdrw that I had and it works fine now. All good...
Well, not totally, but it's a different problem, regarding xmms and the fact that now I can't play audio cd's like I was. I'm sure it is a reconfiguration issue because I changed out the hardware. Any idea how to fix THAT problem? 
Edit: figured it out. Thanks! |
|
| Back to top |
|
|
|
Kernel & Hardware
