| View previous topic :: View next topic |
| Author |
Message |
CLod
Apprentice
Joined: 23 Nov 2004
Posts: 280
|
 Posted: Wed Jan 18, 2006 7:09 pm Post subject: [HELP] freeze sistema |
 |
|
ciao
ho già cercato sul forum riguardo all'argomento ma ho deciso cmq di chiedere a voi che magari sapete consigliarmi la strada migliore
ogni tanto mentre sto usando X il sistema si freeza e lo devo spegnete e far ripartire col tasto d'accensione.
questo lo fa in maniera random, senza che faccia qualcosa di particolare: ieri per esempio non me lo ha mai fatto, oggi invece 2 volte in 1 ora.
nei log non vedo nulla
ora faccio cmq un test della memoria, ma non credo proprio sia dovuto a quello.
sto usando un kernel 2.6.14-suspend2 ma me lo faceva anche con un 2.6.14 gentoo-sources e anche con un 2.6.15 sempre gentoo-sources.
sto usando ati-drivers-8.14.13-r3
xorg versione 6.8.2-r6
gcc-3.4.4-r1
l'altra cosa che devo segnalare è il solito problema con modules-update che non riesco a risolvere: https://forums.gentoo.org/viewtopic-t-422907.html
vi metto un pò di info:
make.conf
| Code: |
CFLAGS="-O2 -march=pentium-m -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2"
LINGUAS="en it"
USE="kde -gnome alsa dvd cdr X -mozilla mozilla-firefox gtk2 xine xmms net acpi apm avi crypt flash gif -imap jpeg mpeg python quicktie usb xml zlib unicode apache2 php postgresql postgres mysql tomcat vxwindows"
|
hw:
| Code: |
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE)
06:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
06:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
06:04.0 CardBus bridge: ENE Technology Inc CB-712/4 Cardbus Controller (rev 10)
06:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller (rev 01)
06:04.2 Class 0805: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller (rev 01)
06:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: (rev 01)
06:04.4 FLASH memory: ENE Technology Inc Unknown device 0551 (rev 01)
|
lsmod:
| Code: |
$ lsmod
Module Size Used by
ipv6 261728 8
ipt_LOG 7936 1
ipt_limit 3456 1
ipt_state 2944 1
iptable_filter 3840 1
ip_tables 22528 4 ipt_LOG,ipt_limit,ipt_state,iptable_filter
snd_pcm_oss 53024 0
snd_mixer_oss 18688 1 snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 33408 0
snd_seq_midi_event 8192 1 snd_seq_oss
snd_seq 53520 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 9356 3 snd_seq_dummy,snd_seq_oss,snd_seq
rtc 10260 0
i2c_i801 9868 0
i2c_core 22400 1 i2c_i801
tpm_nsc 7680 0
tpm 11168 1 tpm_nsc
snd_intel8x0m 19012 1
snd_intel8x0 34272 5
snd_ac97_codec 89596 2 snd_intel8x0m,snd_intel8x0
snd_ac97_bus 3200 1 snd_ac97_codec
snd_pcm 89476 5 snd_pcm_oss,snd_intel8x0m,snd_intel8x0,snd_ac97_codec
snd_timer 26116 3 snd_seq,snd_pcm
snd 56036 20 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 11400 3 snd_intel8x0m,snd_intel8x0,snd_pcm
joydev 10432 0
ip_conntrack_ftp 9072 0
ip_conntrack 53212 2 ipt_state,ip_conntrack_ftp
acpi_cpufreq 7972 1
freq_table 5664 1 acpi_cpufreq
ac 5764 0
agpgart 35532 0
battery 10372 0
button 7568 0
fan 5508 0
video 16900 0
thermal 14216 0
processor 26664 2 acpi_cpufreq,thermal
ipw2200 171716 0
ieee80211 49896 1 ipw2200
ieee80211_crypt 7296 1 ieee80211
8139too 28928 0
pcmcia 39740 0
mii 6400 1 8139too
firmware_class 11136 2 ipw2200,pcmcia
yenta_socket 27404 1
rsrc_nonstatic 14080 1 yenta_socket
pcmcia_core 42260 3 pcmcia,yenta_socket,rsrc_nonstatic
eth1394 21512 0
dm_mirror 23252 0
dm_mod 58396 1 dm_mirror
sbp2 24196 0
ohci1394 34612 0
ieee1394 98360 3 eth1394,sbp2,ohci1394
sl811_hcd 14592 0
ohci_hcd 22532 0
uhci_hcd 33552 0
usb_storage 72512 0
usbhid 48096 0
ehci_hcd 33416 0
usbcore 117120 7 sl811_hcd,ohci_hcd,uhci_hcd,usb_storage,usbhid,ehci_hcd
|
xorg.conf
| Code: |
$ cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
# FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
# FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection
Section "Module"
Load "GLcore"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. Radeon Mobility X700 (RV410)"
Driver "fglrx"
BusID "PCI:1:0:0"
Option "BusType" "PCIE"
Option "CRT2Position" "clone"
Option "MonitorLayout" "LVDS,CRT"
ChipID 0x5652
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "a"
Option "DPMS"
Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon Mobility X700 (RV410)"
Monitor "a"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1440x900" "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900" "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900" "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900" "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900" "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900" "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
|
_________________
http://clod.gruppoimi.it -> my personal site
new zealand immigration... |
|
| Back to top |
|
 |
CLod
Apprentice
Joined: 23 Nov 2004
Posts: 280
|
| Posted: Thu Jan 19, 2006 10:47 am Post subject: |
|
|
il memtest è andato a buon fine
leggendo tra i vari topic del forum qualcuno dice di provare a ricompilare X
dite che può servire?
_________________
http://clod.gruppoimi.it -> my personal site
new zealand immigration... |
|
| Back to top |
|
|
Deus Ex
Guru
Joined: 16 Nov 2005
Posts: 489
Location: Patavium
|
| Posted: Thu Jan 19, 2006 11:53 am Post subject: |
|
|
Secondo me è un problema HW, se è effettivamente a random. A volte può succedere anche che vegano lanciati dei servizi o demoni (perchè in scheduling o chiamati da altri processi) senza che tu te ne accorga, e che potrebbero essere la causa del tuo problema.
Buona fortuna!
_________________
Deus Ex
--
L’inflazione che caccia nelle mani dell’individuo, in un gesto solo, miliardi di marchi, lasciandolo più miserabile di prima, dimostra punto per punto che il denaro è un’allucinazione collettiva. |
|
| Back to top |
|
|
CLod
Apprentice
Joined: 23 Nov 2004
Posts: 280
|
| Posted: Thu Jan 19, 2006 12:45 pm Post subject: |
|
|
sono sicuro che riguarda X comunque il problema
se lo uso da shell, emergo, compilo, ec... non ho mai nessun problema
_________________
http://clod.gruppoimi.it -> my personal site
new zealand immigration... |
|
| Back to top |
|
|
Apetrini
Veteran
Joined: 09 Feb 2005
Posts: 1158
|
| Posted: Thu Jan 19, 2006 2:00 pm Post subject: |
|
|
Puo postrae cortesemente un
_________________
Linux ape 2.6.31-vanilla. Paludis since 0.28.0. |
|
| Back to top |
|
|
CLod
Apprentice
Joined: 23 Nov 2004
Posts: 280
|
| Posted: Thu Jan 19, 2006 2:16 pm Post subject: |
|
|
dmesg
| Code: |
Linux version 2.6.14-suspend2-r7 (root@SATELLITE) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 SMP Tue Jan 17 16:30:35 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
BIOS-e820: 000000003fee0000 - 000000003feea000 (ACPI data)
BIOS-e820: 000000003feea000 - 000000003ff00000 (ACPI NVS)
BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 261856
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32480 pages, LIFO batch:15
DMI present.
ACPI: RSDP (v000 TOSCPL ) @ 0x000f6bd0
ACPI: RSDT (v001 TOSCPL RSDT 0x06040000 LTP 0x00000000) @ 0x3fee39f5
ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x3fee9e88
ACPI: FADT (v001 TOSCPL ALVISO 0x06040000 LOHR 0x00000032) @ 0x3fee9ef0
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3fee9fd8
ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x3fee9f9c
ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20030224) @ 0x3fee490b
ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20030224) @ 0x3fee4279
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x3fee3e34
ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x3fee3c56
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x3fee3a3d
ACPI: DSDT (v001 TOSCPL ALVISO 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Gentoo ro real_root=/dev/sda7
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1996.118 MHz processor.
Using pmtmr for high-res timesource
Speakup v-2.00 CVS: Wed Oct 26 15:13:02 EDT 2005 : initialized
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032352k/1047424k available (2476k kernel code, 14296k reserved, 811k data, 224k init, 129920k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3993.96 BogoMIPS (lpj=1996980)
Mount-cache hash table entries: 512
Couldn't initialize miscdevice /dev/synth.
CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
Total of 1 processors activated (3993.96 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 1166k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd904, last bus=7
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: Embedded Controller [EC0] (gpe 29)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:00: ioport range 0xfe00-0xfe7f has been reserved
pnp: 00:00: ioport range 0xfe80-0xfeff has been reserved
pnp: 00:00: ioport range 0xff00-0xff7f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: b0100000-b01fffff
PREFETCH window: c0000000-cfffffff
PCI: Bridge: 0000:00:1c.0
IO window: 4000-4fff
MEM window: b4000000-b7ffffff
PREFETCH window: d0000000-d3ffffff
PCI: Bridge: 0000:00:1c.1
IO window: 5000-5fff
MEM window: b8000000-bbffffff
PREFETCH window: d4000000-d7ffffff
PCI: Bus 7, cardbus bridge: 0000:06:04.0
IO window: 00006400-000064ff
IO window: 00006800-000068ff
PREFETCH window: 50000000-51ffffff
MEM window: 52000000-53ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 6000-6fff
MEM window: bc000000-bc0fffff
PREFETCH window: 50000000-51ffffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 169
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
audit(1137673428.669:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: protected mode interface info at c000:af9a
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: Mode is VGA compatible
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 217
ACPI: PCI interrupt for device 0000:00:1e.3 disabled
mice: PS/2 mouse device common for all mice
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
input: AT Translated Set 2 keyboard on isa0060/serio0
hdc: TSSTcorpCD/DVDW TS-L632B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.12 loaded.
ata_piix version 1.04
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
ata: 0x170 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18F0 irq 14
input: PS/2 Mouse on isa0060/serio4
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4
ata1: dev 0 cfg 49:2f00 82:746b 83:7d09 84:6023 85:7469 86:3d09 87:6023 88:203f
ata1: dev 0 ATA, max UDMA/100, 194980905 sectors: lba48
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: TOSHIBA MK1032GA Rev: AB21
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 194980905 512-byte hdwr sectors (99830 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 194980905 512-byte hdwr sectors (99830 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.39
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
Netfilter messages via NETLINK v0.30.
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
ACPI wakeup devices:
RP01 RP02 USB1 USB2 USB3 USB4 USB7 ELAN MODM BT
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 224k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 233, io mem 0xb0000000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 233, io base 0x00001800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 225, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 50, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 50, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 20 (level, low) -> IRQ 217
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[217] MMIO=[bc004000-bc0047ff] Max Packet=[2048]
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
input: PS/2 Mouse on isa0060/serio4
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4
ReiserFS: sda7: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda7
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f5a76402005]
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
ext3_orphan_cleanup: deleting unreferenced inode 5249037
ext3_orphan_cleanup: deleting unreferenced inode 5463484
ext3_orphan_cleanup: deleting unreferenced inode 5463483
ext3_orphan_cleanup: deleting unreferenced inode 5463482
ext3_orphan_cleanup: deleting unreferenced inode 5463481
ext3_orphan_cleanup: deleting unreferenced inode 5463480
ext3_orphan_cleanup: deleting unreferenced inode 5463479
ext3_orphan_cleanup: deleting unreferenced inode 5249051
ext3_orphan_cleanup: deleting unreferenced inode 5463478
ext3_orphan_cleanup: deleting unreferenced inode 5249049
ext3_orphan_cleanup: deleting unreferenced inode 5249048
ext3_orphan_cleanup: deleting unreferenced inode 5249050
ext3_orphan_cleanup: deleting unreferenced inode 5463473
ext3_orphan_cleanup: deleting unreferenced inode 5249047
ext3_orphan_cleanup: deleting unreferenced inode 5249046
ext3_orphan_cleanup: deleting unreferenced inode 5249045
ext3_orphan_cleanup: deleting unreferenced inode 5249044
ext3_orphan_cleanup: deleting unreferenced inode 5249042
ext3_orphan_cleanup: deleting unreferenced inode 5249043
ext3_orphan_cleanup: deleting unreferenced inode 5249038
ext3_orphan_cleanup: deleting unreferenced inode 5249039
EXT3-fs: sda7: 21 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 594396k swap on /dev/sda3. Priority:-1 extents:1 across:594396k
EXT3 FS on sda7, internal journal
ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 169
Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff01]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:06:04.0, mfunc 0x89501212, devctl 0x44
Yenta: ISA IRQ mask 0x0cf8, PCI irq 169
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
cs: IO port probe 0x6000-0x6fff: clean.
pcmcia: parent PCI bridge Memory window: 0xbc000000 - 0xbc0fffff
pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 58
eth0: RealTek RTL8139 at 0xf8cae800, 00:0f:b0:a0:78:a9, IRQ 58
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, 1.1.9
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.10
ipw2200: Copyright(c) 2003-2005 Intel Corporation
ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 22 (level, low) -> IRQ 66
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID0]
ACPI: Power Button (CM) [PWRB]
ACPI: Battery Slot [BAT1] (battery present)
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: AC Adapter [ACAD] (on-line)
acpi-cpufreq: CPU0 - ACPI performance management activated.
ip_conntrack version 2.3 (8183 buckets, 65464 max) - 236 bytes per conntrack
eth0: link down
eth0: link down
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1e.2 to 64
intel8x0_measure_ac97_clock: measured 66227 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1e.3 to 64
Real Time Clock Driver v1.12
ip_tables: (C) 2000-2002 Netfilter core team
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
ACPI-0292: *** Error: Looking up [PBST] in namespace, AE_ALREADY_EXISTS
ACPI-0508: *** Error: Method execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node c19499a0), AE_ALREADY_EXISTS
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
|
qui pezzi di /var/log/messagges quando il sistema si piantava.
edit: nn credo sia quell'ultimo errore che da problemi, in quanto vedo troppa differenza di orario tra il freeze e il riavvio che è sempre avvenuto subito dopo l'arresto del sistema
| Code: |
Jan 19 11:29:53 SATELLITE kjournald starting. Commit interval 5 seconds
Jan 19 11:29:53 SATELLITE EXT3 FS on sda1, internal journal
Jan 19 11:29:53 SATELLITE EXT3-fs: mounted filesystem with ordered data mode.
Jan 19 11:29:53 SATELLITE kjournald starting. Commit interval 5 seconds
Jan 19 11:29:53 SATELLITE EXT3 FS on sda5, internal journal
Jan 19 11:29:53 SATELLITE EXT3-fs: mounted filesystem with ordered data mode.
Jan 19 11:29:53 SATELLITE ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 177
Jan 19 11:29:53 SATELLITE PCI: Setting latency timer of device 0000:00:1e.2 to 64
Jan 19 11:29:53 SATELLITE intel8x0_measure_ac97_clock: measured 67472 usecs
Jan 19 11:29:53 SATELLITE intel8x0: clocking to 48000
Jan 19 11:29:53 SATELLITE ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 217
Jan 19 11:29:53 SATELLITE PCI: Setting latency timer of device 0000:00:1e.3 to 64
Jan 19 11:29:53 SATELLITE Real Time Clock Driver v1.12
Jan 19 11:29:55 SATELLITE cpufreqd: apm_init : /proc/apm: No such file or directory
Jan 19 11:29:55 SATELLITE cpufreqd: parse_config_rule : WARNING! skipping config option "acpi_temperature"
Jan 19 11:29:55 SATELLITE cpufreqd: parse_config_rule : WARNING! skipping config option "acpi_temperature"
Jan 19 11:29:55 SATELLITE ip_tables: (C) 2000-2002 Netfilter core team
Jan 19 11:29:55 SATELLITE cron[6411]: (CRON) STARTUP (V5.0)
Jan 19 11:29:55 SATELLITE cron[6411]: (*system*) BAD FILE MODE (/etc/crontab)
Jan 19 11:29:56 SATELLITE init: Activating demand-procedures for 'A'
Jan 19 11:30:00 SATELLITE mtrr: no more MTRRs available
Jan 19 11:30:00 SATELLITE mtrr: no more MTRRs available
Jan 19 11:30:00 SATELLITE mtrr: no more MTRRs available
Jan 19 11:30:00 SATELLITE mtrr: no more MTRRs available
Jan 19 11:30:00 SATELLITE mtrr: no more MTRRs available
Jan 19 11:30:07 SATELLITE dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11
Jan 19 11:30:07 SATELLITE logger: ACPI group battery / action battery is not defined
Jan 19 11:30:14 SATELLITE kde(pam_unix)[6622]: session opened for user clod by (uid=0)
Jan 19 11:30:18 SATELLITE dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
Jan 19 11:30:33 SATELLITE dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8
Jan 19 11:30:41 SATELLITE dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
Jan 19 11:30:45 SATELLITE dhclient: No DHCPOFFERS received.
Jan 19 11:30:51 SATELLITE su(pam_unix)[6853]: session opened for user root by (uid=501)
Jan 19 11:32:15 SATELLITE (clod-6934): Inizializzazione (versione 2.10.1), pid 6934, utente 'clod'
Jan 19 11:32:15 SATELLITE (clod-6934): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.mandatory" <C3><A8> stato risolt
a ad una fonte di configurazione in sola lettura in posizione 0
Jan 19 11:32:15 SATELLITE (clod-6934): L'indirizzo "xml:readwrite:/home/clod//.gconf" <C3><A8> stato risolto ad una fo
nte di configurazione scrivibile in posizione 1
Jan 19 11:32:15 SATELLITE (clod-6934): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.defaults" <C3><A8> stato risolta
ad una fonte di configurazione in sola lettura in posizione 2
Jan 19 11:32:42 SATELLITE ACPI-0292: *** Error: Looking up [PBST] in namespace, AE_ALREADY_EXISTS
Jan 19 11:32:42 SATELLITE ACPI-0508: *** Error: Method execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node c19499a0), A
E_ALREADY_EXISTS
Jan 19 12:24:09 SATELLITE syslog-ng[5840]: syslog-ng version 1.6.8 starting
Jan 19 12:24:09 SATELLITE syslog-ng[5840]: Changing permissions on special file /dev/tty12
Jan 19 12:24:09 SATELLITE Linux version 2.6.14-suspend2-r7 (root@SATELLITE) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3
.4.4-1.0, pie-8.7.8)) #1 SMP Tue Jan 17 16:30:35 UTC 2006
|
| Code: |
Jan 19 10:48:05 SATELLITE logger: ACPI group battery / action battery is not defined
Jan 19 10:48:09 SATELLITE kde(pam_unix)[6314]: session opened for user clod by (uid=0)
Jan 19 10:48:39 SATELLITE su(pam_unix)[6532]: session opened for user root by (uid=501)
Jan 19 10:49:37 SATELLITE (clod-6643): Inizializzazione (versione 2.10.1), pid 6643, utente 'clod'
Jan 19 10:49:37 SATELLITE (clod-6643): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.mandatory" <C3><A8> stato risolt
a ad una fonte di configurazione in sola lettura in posizione 0
Jan 19 10:49:37 SATELLITE (clod-6643): L'indirizzo "xml:readwrite:/home/clod//.gconf" <C3><A8> stato risolto ad una fo
nte di configurazione scrivibile in posizione 1
Jan 19 10:49:37 SATELLITE (clod-6643): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.defaults" <C3><A8> stato risolta
ad una fonte di configurazione in sola lettura in posizione 2
Jan 19 10:52:15 SATELLITE ACPI-0292: *** Error: Looking up [PBST] in namespace, AE_ALREADY_EXISTS
Jan 19 10:52:15 SATELLITE ACPI-0508: *** Error: Method execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node c19499a0), A
E_ALREADY_EXISTS
Jan 19 11:29:53 SATELLITE syslog-ng[5842]: syslog-ng version 1.6.8 starting
Jan 19 11:29:53 SATELLITE syslog-ng[5842]: Changing permissions on special file /dev/tty12
Jan 19 11:29:53 SATELLITE Linux version 2.6.14-suspend2-r7 (root@SATELLITE) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3
.4.4-1.0, pie-8.7.8)) #1 SMP Tue Jan 17 16:30:35 UTC 2006
|
l'ultima cosa che logga è questa: Error: Method execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node c19499a0), A
E_ALREADY_EXISTS
ora però è in esecuzione senza X e funziona perfettamente; vedo nel log:
| Code: |
Jan 19 12:25:04 SATELLITE su(pam_unix)[6839]: session opened for user root by (uid=501)
Jan 19 12:25:28 SATELLITE (clod-6896): Inizializzazione (versione 2.10.1), pid 6896, utente 'clod'
Jan 19 12:25:29 SATELLITE (clod-6896): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.mandatory" <C3><A8> stato risolt
a ad una fonte di configurazione in sola lettura in posizione 0
Jan 19 12:25:29 SATELLITE (clod-6896): L'indirizzo "xml:readwrite:/home/clod//.gconf" <C3><A8> stato risolto ad una fo
nte di configurazione scrivibile in posizione 1
Jan 19 12:25:29 SATELLITE (clod-6896): L'indirizzo "xml:readonly:/etc/gconf/gconf.xml.defaults" <C3><A8> stato risolta
ad una fonte di configurazione in sola lettura in posizione 2
Jan 19 12:27:58 SATELLITE ACPI-0292: *** Error: Looking up [PBST] in namespace, AE_ALREADY_EXISTS
Jan 19 12:27:58 SATELLITE ACPI-0508: *** Error: Method execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node c19499a0), A
E_ALREADY_EXISTS
|
_________________
http://clod.gruppoimi.it -> my personal site
new zealand immigration... |
|
| Back to top |
|
|
CLod
Apprentice
Joined: 23 Nov 2004
Posts: 280
|
| Posted: Thu Jan 19, 2006 2:52 pm Post subject: |
|
|
di nuovo lo stesso errore e lo stess freeze:
| Code: |
Jan 19 15:47:21 SATELLITE ip_tables: (C) 2000-2002 Netfilter core team
Jan 19 15:47:22 SATELLITE cron[9000]: (CRON) STARTUP (V5.0)
Jan 19 15:47:22 SATELLITE cron[9000]: (*system*) BAD FILE MODE (/etc/crontab)
Jan 19 15:47:22 SATELLITE init: Activating demand-procedures for 'A'
Jan 19 15:47:26 SATELLITE mtrr: no more MTRRs available
Jan 19 15:47:26 SATELLITE mtrr: no more MTRRs available
Jan 19 15:47:26 SATELLITE mtrr: no more MTRRs available
Jan 19 15:47:26 SATELLITE mtrr: no more MTRRs available
Jan 19 15:47:26 SATELLITE mtrr: no more MTRRs available
Jan 19 15:47:33 SATELLITE logger: ACPI group battery / action battery is not defined
Jan 19 15:47:37 SATELLITE kde(pam_unix)[9210]: session opened for user clod by (uid=0)
Jan 19 15:48:02 SATELLITE ACPI-0292: *** Error: Looking up [PBST] in namespace, AE_ALREADY_EXISTS
Jan 19 15:48:02 SATELLITE ACPI-0508: *** Error: Method execution failed [\_SB_.PCI0.LPCB.BAT1._BST] (Node c19499a0), AE_ALREADY_EXISTS
Jan 19 15:48:05 SATELLITE su(pam_unix)[9420]: session opened for user root by (uid=501) |
_________________
http://clod.gruppoimi.it -> my personal site
new zealand immigration... |
|
| Back to top |
|
|
CLod
Apprentice
Joined: 23 Nov 2004
Posts: 280
|
| Posted: Thu Jan 19, 2006 10:49 pm Post subject: |
|
|
deve essere un problema di acpi e + specificatamente del modulo della batteria o di qualche cosa d'altro che ha a che fare con la batteria e che freeza
sto provando con apm e funziona tutto perfettamente
indicazioni per poter usare cmq acpi senza questo inconveniente?
_________________
http://clod.gruppoimi.it -> my personal site
new zealand immigration... |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
