| View previous topic :: View next topic |
| Author |
Message |
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
 Posted: Thu Dec 29, 2005 10:22 am Post subject: Problem z XORG i sterami NVidii |
 |
|
Witam ponownie 
Sorki za zwrot, ale zaraz mnie slag chyba trafi  .
Najpierw kernel, a teraz X'y  .
Mam karte graficzna GigaByte'a GeeForce 6600 PCI-E.
2 systemy, jak to pisalem tutaj: https://forums.gentoo.org/viewtopic-t-417215.html
Na tym starym, co jest na samsungu mam takie stery:
[ebuild U ] media-video/nvidia-kernel-1.0.8178 [1.0.7676-r1] 9,336 kB
[ebuild U ] media-video/nvidia-glx-1.0.8178 [1.0.7676-r2] -dlloader 0 kB
Robilem synca, ale nie upgradeowalem nic .
Wszystko dziala na sterach 7676 => zero problemow.
Na nowym gentoo posadzilem 8187. I co? X'y odpalaja mi sie rozdzialce 800x600. Nie moge ich ruszyc w 1024x768px.
Jak zrobie ich downgrade do 7676, to dziala. Po ponownym upgrade nowu max 800x600. Konfig X'ow na obydwuch Gentoo jest taki sam: http://free.of.pl/m/macrosoft/NEW/xorg.conf
W skrocie: Na 7676 dziala 1024x768 a na nowszych, czyli juz 8xxx max 800x600.
Co jest nie tak? |
|
| Back to top |
|
 |
nelchael
Retired Dev
Joined: 20 Mar 2004
Posts: 1948
Location: /dev/drzewo
|
| Posted: Thu Dec 29, 2005 10:43 am Post subject: |
|
|
Dosc czesto sie zdarza, ze nVidia popsuje cos w nowych sterownikach - zamaskuj ta felerna wersje i dzialaj na tych dobrych.
_________________
[color=gray:17697d0166]http://dev.gentoo.org/~nelchael/[/color:17697d0166]
[size=14:17697d0166]>> [b:17697d0166]Zasady na f.g.o->Polish[/b:17697d0166] <<[/size:17697d0166] |
|
| Back to top |
|
|
martin.k
Guru
Joined: 28 Nov 2004
Posts: 493
Location: Wylatowo, Polska
|
| Posted: Thu Dec 29, 2005 10:51 am Post subject: |
|
|
W sekcji device pokombinuj z opcjami:
| Code: | Option "UseEdidFreqs" "boolean"
This option controls whether the NVIDIA X driver will use the HorizSync and VertRefresh ranges given in a display device's EDID, if any. When UseEdidFreqs is set to True, EDID-provided range information will override the HorizSync and VertRefresh ranges specified in the Monitor section. If a display device does not provide an EDID, or the EDID does not specify an hsync or vrefresh range, then the X server will default to the HorizSync and VertRefresh ranges specified in the Monitor section of your X config file. These frequency ranges are used when validating modes for your display device.
Default: True (EDID frequencies will be used)
Option "IgnoreEDID" "boolean"
Disable probing of EDID (Extended Display Identification Data) from your monitor. Requested modes are compared against values gotten from your monitor EDID (if any) during mode validation. Some monitors are known to lie about their own capabilities. Ignoring the values that the monitor gives may help get a certain mode validated. On the other hand, this may be dangerous if you do not know what you are doing. Default: false (use EDID).
Option "NoDDC" "boolean"
Synonym for "IgnoreEDID" |
Może to coś da.
_________________
linux-2.6.17 +ck +R4 +lockless +genetic-as +... więcej nie pamiętam 
LRU #299256 |
|
| Back to top |
|
|
ANTAL
n00b
Joined: 09 Jan 2006
Posts: 59
Location: Wrocław/Jesenik
|
| Posted: Sun Jan 22, 2006 2:56 am Post subject: |
|
|
Mam podobny problem.
| Code: |
Identifier "Card0"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]"
BusID "PCI:0:14:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
|
KDE startuje mi z rozdzielczością ekranu 640x480@60Hz...
Próbowałem: ustawiać parametry w xorgcfg, i w xorgcfg - textmode, pokazywało kartę graficzną, po zadeklarowaniu rozdzielczości ekranu nic się nie zmienia... Próba wpisania w xorg.conf tej rozdzielczości , która chcę mieć (Modes "1024x768" ) kończy się komunikatem po #startx o błędnie wpisanej linijce... Ekran na pewno może pracować w rozdzielczości do 1280x1024 @ 75 Hz (więcej po prostu nie próbowałem - to jest dość stary model IBM SG200)
_________________
Pozdrawiam
ANTAL
NOSTROMO: PENTIUM III, 512MB RAM, HDD1(fat32) 15GB, HDD2 (GENTOO) 20GB, NVIDIA RIVA TNT2 Model 64 Pro, Monitor IBM Power Display 20", CDROM 45x, DVD RW Toshiba,Tablet WACOM Intuos GD-1212-R |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Polskie forum (Polish) 
