| View previous topic :: View next topic |
| Author |
Message |
gafami
n00b
Joined: 30 Dec 2002
Posts: 18
|
 Posted: Tue Mar 18, 2003 9:44 pm Post subject: Problems with XFree (4.2.1) + Nvidia Drivers (GF4) |
 |
|
hey there,
I am new to gentoo, but I managed to get it installed, and everything working just fine under the console - damn nice work gentoo-team 
however, I now wanted to make the next step, and install/emerge etc X + gnome, which I did, all packages emerged successfully, no errors or whatsoever... so I also emerged the nvidia-kernel & nvidia-glx packages, added the NVdriver(s) to the modules.autoload.. and they are loaded fine too.. no errors. I replaced the 'nv' with 'nvidia' in my XF86Config file.... (see below), but when I type 'startx' I get a fuzzy screen, and my machine seems to hang  only a reboot helps then.
the monitor is a 18.1" TFT display, that should run at 1280*1024, with 60hz ... 
here's my XF86Config file:
| Quote: | # File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "fbdevhw"
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "dri"
Load "glx"
Load "record"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/mouse"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Samsung 181T"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "GeForce 4"
Driver "nvidia"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "GeForce 4"
Monitor "Samsung 181T"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
|
oh yeah btw - how would I enable my USB-mouse for X - xf86config doesn't really offer the option.. does it? :\ (it's a logitech mx700 mouse)
and here's my XFree86.0.log - file:
| Quote: |
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20-gentoo-r1 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Mar 18 22:28:10 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Samsung 181T"
(**) | |-->Device "GeForce 4"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80010044, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2530 card 1043,8030 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2532 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 04 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 1043,8028 rev 04 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 1043,8028 rev 04 class 0c,03,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 1043,8028 rev 04 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0250 card 10de,0130 rev a2 class 03,00,00 hdr 00
(II) PCI: 02:0a:0: chip 13c1,1001 card 13c1,1001 rev 01 class 01,04,00 hdr 00
(II) PCI: 02:0b:0: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80
(II) PCI: 02:0b:1: chip 1106,3038 card 0925,1234 rev 50 class 0c,03,00 hdr 80
(II) PCI: 02:0b:2: chip 1106,3104 card 0925,1234 rev 51 class 0c,03,20 hdr 80
(II) PCI: 02:0c:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00 hdr 80
(II) PCI: 02:0c:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00 hdr 80
(II) PCI: 02:0c:2: chip 1102,4001 card 1102,0010 rev 00 class 0c,00,10 hdr 80
(II) PCI: 02:0e:0: chip 10b7,9200 card 10b7,1000 rev 74 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xee000000 - 0xef5fffff (0x1600000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xef700000 - 0xf7ffffff (0x8900000) MX[B]
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x06 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[1] -1 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[2] -1 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[3] -1 0x0000bc00 - 0x0000bcff (0x100) IX[B]
[4] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[5] -1 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[6] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[7] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
[8] -1 0x0000d000 - 0x0000d0ff (0x100) IX[B]
[9] -1 0x0000d400 - 0x0000d4ff (0x100) IX[B]
[10] -1 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[11] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0xeb000000 - 0xedffffff (0x3000000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0xef600000 - 0xef6fffff (0x100000) MX[B]
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) NVidia 0x0250 rev 162, Mem @ 0xee000000/24, 0xf0000000/27, 0xef800000/19, BIOS @ 0xef7e0000/17
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xeb000000 - 0xeb00007f (0x80) MX[B]
[1] -1 0xed000000 - 0xed7fffff (0x800000) MX[B]
[2] -1 0xed800000 - 0xed80000f (0x10) MX[B]
[3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[4] -1 0xef7e0000 - 0xef7fffff (0x20000) MX[B](B)
[5] -1 0xef800000 - 0xef87ffff (0x80000) MX[B](B)
[6] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[7] -1 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[8] -1 0x0000b000 - 0x0000b07f (0x80) IX[B]
[9] -1 0x0000d000 - 0x0000d01f (0x20) IX[B]
[10] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[11] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
[12] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[13] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[14] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
(II) Inactive PCI resource ranges:
[0] -1 0xeb800000 - 0xeb803fff (0x4000) MX[B]
[1] -1 0xec000000 - 0xec0007ff (0x800) MX[B]
[2] -1 0xec800000 - 0xec8000ff (0x100) MX[B]
[3] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[4] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xeb000000 - 0xeb00007f (0x80) MX[B]
[1] -1 0xed000000 - 0xed7fffff (0x800000) MX[B]
[2] -1 0xed800000 - 0xed80000f (0x10) MX[B]
[3] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[4] -1 0xef7e0000 - 0xef7fffff (0x20000) MX[B](B)
[5] -1 0xef800000 - 0xef87ffff (0x80000) MX[B](B)
[6] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[7] -1 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[8] -1 0x0000b000 - 0x0000b07f (0x80) IX[B]
[9] -1 0x0000d000 - 0x0000d01f (0x20) IX[B]
[10] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[11] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
[12] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[13] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[14] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0xeb800000 - 0xeb803fff (0x4000) MX[B]
[1] -1 0xec000000 - 0xec0007ff (0x800) MX[B]
[2] -1 0xec800000 - 0xec8000ff (0x100) MX[B]
[3] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[4] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xeb000000 - 0xeb00007f (0x80) MX[B]
[6] -1 0xed000000 - 0xed7fffff (0x800000) MX[B]
[7] -1 0xed800000 - 0xed80000f (0x10) MX[B]
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[9] -1 0xef7e0000 - 0xef7fffff (0x20000) MX[B](B)
[10] -1 0xef800000 - 0xef87ffff (0x80000) MX[B](B)
[11] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[12] -1 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[13] -1 0xeb800000 - 0xeb803fff (0x4000) MX[B]
[14] -1 0xec000000 - 0xec0007ff (0x800) MX[B]
[15] -1 0xec800000 - 0xec8000ff (0x100) MX[B]
[16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0x0000b000 - 0x0000b07f (0x80) IX[B]
[19] -1 0x0000d000 - 0x0000d01f (0x20) IX[B]
[20] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[21] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
[22] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[23] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[24] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
[25] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[26] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.3123
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.3123
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) NVIDIA XFree86 Driver 1.0-3123 Tue Aug 27 16:00:08 PDT 2002
(II) NVIDIA: NVIDIA driver for: RIVA TNT, RIVA TNT2, Vanta,
RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256,
GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
Quadro2 MXR/EX/Go, GeForce2 Integrated GPU, GeForce2 GTS,
GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro, GeForce4 MX 460,
GeForce4 MX 440, GeForce4 MX 420, Quadro4 500/550 XGL,
Quadro4 200/400 NVS, NV18, NV18 , NV18 , NV18, NV18GL, NV18GL ,
NV18GL , 0x01F0, GeForce3, GeForce3 Ti 200, GeForce3 Ti 500,
Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400, GeForce4 Ti 4200,
Quadro4 900 XGL, Quadro4 750 XGL, Quadro4 700 XGL, NV28, NV28 ,
NV28GL, NV28GL , GeForce2 Go, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
GeForce4 410 Go 16M, Quadro4 500 GoGL
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce4 Ti 4600 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xeb000000 - 0xeb00007f (0x80) MX[B]
[6] -1 0xed000000 - 0xed7fffff (0x800000) MX[B]
[7] -1 0xed800000 - 0xed80000f (0x10) MX[B]
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[9] -1 0xef7e0000 - 0xef7fffff (0x20000) MX[B](B)
[10] -1 0xef800000 - 0xef87ffff (0x80000) MX[B](B)
[11] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[12] -1 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[13] -1 0xeb800000 - 0xeb803fff (0x4000) MX[B]
[14] -1 0xec000000 - 0xec0007ff (0x800) MX[B]
[15] -1 0xec800000 - 0xec8000ff (0x100) MX[B]
[16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0x0000b000 - 0x0000b07f (0x80) IX[B]
[19] -1 0x0000d000 - 0x0000d01f (0x20) IX[B]
[20] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[21] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
[22] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[23] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[24] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
[25] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[26] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xeb000000 - 0xeb00007f (0x80) MX[B]
[6] -1 0xed000000 - 0xed7fffff (0x800000) MX[B]
[7] -1 0xed800000 - 0xed80000f (0x10) MX[B]
[8] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[9] -1 0xef7e0000 - 0xef7fffff (0x20000) MX[B](B)
[10] -1 0xef800000 - 0xef87ffff (0x80000) MX[B](B)
[11] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[12] -1 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[13] -1 0xeb800000 - 0xeb803fff (0x4000) MX[B]
[14] -1 0xec000000 - 0xec0007ff (0x800) MX[B]
[15] -1 0xec800000 - 0xec8000ff (0x100) MX[B]
[16] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[17] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[18] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[19] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0x0000b000 - 0x0000b07f (0x80) IX[B]
[22] -1 0x0000d000 - 0x0000d01f (0x20) IX[B]
[23] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[24] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
[25] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[26] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[27] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
[28] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[29] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
[30] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[31] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
(==) NVIDIA(0): RGB weight 565
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xF0000000
(--) NVIDIA(0): MMIO registers at 0xEE000000
(WW) System lacks support for changing MTRRs
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(--) NVIDIA(0): Detected TV Encoder: Brooktree 871
(--) NVIDIA(0): Display 0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display 0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display 0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(WW) NVIDIA(0): The user specified VertRefresh "50.000-70.000" has been
(WW) NVIDIA(0): adjusted to "56.000-70.000" (the intersection with
(WW) NVIDIA(0): EDID-specified VertRefresh "56.000-85.000"
(II) NVIDIA(0): Samsung 181T: Using hsync range of 31.50-64.30 kHz
(II) NVIDIA(0): Samsung 181T: Using vrefresh range of 56.00-70.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x175" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "720x400" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "360x200" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "512x384" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x864" (hsync out of range)
(II) NVIDIA(0): Not using default mode "576x432" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x960" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x480" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "832x624" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "416x312" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(**) NVIDIA(0): Validated modes for Display Device 0:
(**) NVIDIA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(**) NVIDIA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(**) NVIDIA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): Display dimensions: (340, 270) mm
(--) NVIDIA(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xef800000 - 0xef87ffff (0x80000) MX[B]
[1] 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
[2] 0 0xee000000 - 0xeeffffff (0x1000000) MX[B]
[3] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0xeb000000 - 0xeb00007f (0x80) MX[B]
[9] -1 0xed000000 - 0xed7fffff (0x800000) MX[B]
[10] -1 0xed800000 - 0xed80000f (0x10) MX[B]
[11] -1 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[12] -1 0xef7e0000 - 0xef7fffff (0x20000) MX[B](B)
[13] -1 0xef800000 - 0xef87ffff (0x80000) MX[B](B)
[14] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
[15] -1 0xee000000 - 0xeeffffff (0x1000000) MX[B](B)
[16] -1 0xeb800000 - 0xeb803fff (0x4000) MX[B]
[17] -1 0xec000000 - 0xec0007ff (0x800) MX[B]
[18] -1 0xec800000 - 0xec8000ff (0x100) MX[B]
[19] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[20] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[21] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[22] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0x0000b000 - 0x0000b07f (0x80) IX[B]
[25] -1 0x0000d000 - 0x0000d01f (0x20) IX[B]
[26] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[27] -1 0x0000d800 - 0x0000d80f (0x10) IX[B]
[28] -1 0x0000a000 - 0x0000a01f (0x20) IX[B]
[29] -1 0x0000a400 - 0x0000a41f (0x20) IX[B]
[30] -1 0x0000a800 - 0x0000a80f (0x10) IX[B]
[31] -1 0x0000b400 - 0x0000b407 (0x8) IX[B]
[32] -1 0x0000b800 - 0x0000b81f (0x20) IX[B]
[33] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[34] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): AGP 4X successfully initialized
(II) NVIDIA(0): Setting mode "1280x1024"
(II) NVIDIA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillSolidRects replacement
Driver provided FillSolidSpans replacement
Driver provided FillMono8x8PatternRects replacement
Driver provided WritePixmap replacement
Driver provided ReadPixmap replacement
Setting up tile and stipple cache:
20 128x128 slots
5 256x256 slots
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(EE) NVIDIA(0): Failed to obtain a shared memory identifier.
(II) Loading extension NV-GLX
(II) Loading extension NV-CONTROL
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) [GLX]: Calling GlxExtensionInit
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org. |
can anyone maybe help me? =(
thanks a lot,
-Joerg
_________________
http://www.justBE.com Global Open Source Personalization |
|
| Back to top |
|
 |
Ziraku
n00b
Joined: 17 Oct 2002
Posts: 35
Location: United Kingdom
|
| Posted: Tue Mar 18, 2003 10:37 pm Post subject: |
|
|
I don't know if this will help, but the nvidia driver documentation (http://download.nvidia.com/XFree86_40/1.0-4191/README)
says to remove dri from your XF86Config. Worth a try, but i don't suspect it will work.
I've got a logitech dual optical usb mouse and these are the settings i use
This is in XF86Config:
| Code: |
Section "InputDevice"
Identifier "Mouse2"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
# You only need the following if you have two mouse buttons
Option "Emulate3Buttons"
|
The only other thing I can suggest for that other problem is trying to re-emerge glx, because that seems to be what xfree is having trouble with.
_________________
perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);' |
|
| Back to top |
|
|
freakin_duck
n00b
Joined: 28 Oct 2003
Posts: 19
Location: Boston, MA
|
| Posted: Tue Oct 28, 2003 6:45 pm Post subject: Device (and monitor?) configured improperly |
|
|
it's an old post, but in case you're STILL trying:
First, remove this device driver, unless you really do have 2 cards.
If you do have 2 cards, the you need to specify the BusId for both.
I assume this was in error.
| Code: | Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
#...
Driver "vga"
#...
EndSection |
Also, It looks like your monitor setting for Horiz and Vert sync are low, though for flat screen's maybe that's normal:
Double check those:
| Code: | Section "Monitor"
Identifier "Samsung 181T"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 64.3
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-70
EndSection |
_________________
"Like stealing candy from a baby?" Isn't candy a choking hazard?
Athlon T-Bird 800 (VIA chipset)
1+ GB ram
Geforce 2 Ultra64 |
|
| Back to top |
|
|
albrow
n00b
Joined: 07 Jun 2002
Posts: 56
Location: United Kingdom
|
| Posted: Wed Nov 26, 2003 5:02 pm Post subject: |
|
|
And to add my two pennies...
I had this problem with the NVidia drivers and a GeForce 2 MX-200 card. In the end I fixed it by using the 2.4.22 vanilla kernel. I had no end of problems with all of the 2.4.20 flavours that exactly mirror the symptoms you had.
I'm still having problems with the NVidia drivers and the framebuffer. Of to scour the forums methinks... |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
