| View previous topic :: View next topic |
| Author |
Message |
sammy2ooo
Apprentice
Joined: 26 May 2004
Posts: 225
|
 Posted: Mon Jan 16, 2006 6:43 am Post subject: cant get cups / my printer working |
 |
|
Hello folks,
i am trying to setup a Kyocera FS-680 laser printer at lpt with cups. So i followed the printing howto. http://www.gentoo.org/doc/de/printing-howto.xml. But I am not able to print. I have set "bidirectinal mode" in the bios, I am not sure about this setting. I have doublechecked all the neccessary kernel options.
| Quote: |
sammy@uranos ~ $ dmesg | grep lp
On node 0 totalpages: 131056
Calibrating delay using timer specific routine.. 4005.56 BogoMIPS (lpj=8011120)
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
lp: driver loaded but no devices found
lp0: using parport0 (interrupt-driven).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
|
but there must still be something wrong, because of the "driver loaded but no devices found" line
I have downloaded the necessary ppd file from linuxprinting.org
http://www.linuxprinting.org/show_printer.cgi?recnum=Kyocera-FS-680
and copied it over to /usr/share/cups/models. However the setup of the printer within the cups web configuration dialog succeded.
I am running the latest kernel from portage
| Quote: |
sammy@uranos ~ $ uname -va
Linux uranos 2.6.14-gentoo-r5 #1 PREEMPT Sat Jan 14 22:32:26 CET 2006 i686 AMD Athlon(tm) XP 2400+ AuthenticAMD GNU/Linux
|
Any help on this would be greatlly appreciated.
_________________
- Linux is sexy -
guru@linux:~> who | egrep -i 'blonde|black|brown' | talk && cd ~; wine; talk; touch; unzip; touch; strip; gasp; finger; mount; fsck; more; yes; gasp; umount; make clean; sleep; |
|
| Back to top |
|
 |
donjuan
l33t
Joined: 11 May 2004
Posts: 760
Location: At Uni
|
| Posted: Mon Jan 16, 2006 7:06 am Post subject: |
|
|
It does sound to me like a BIOS setting problem. I remember having a problem similar to this oh so many years ago trying to get my dad's laser printer working. I think your setting should be either ECP or EPP, and some BIOSes even have the option of "EPP+ECP".
_________________
Command-line ACCEPT_KEYWORDS is considered harmful, use the package.* files.
The Stage 1 on 3 Install |
|
| Back to top |
|
|
sammy2ooo
Apprentice
Joined: 26 May 2004
Posts: 225
|
| Posted: Mon Jan 16, 2006 9:09 am Post subject: |
|
|
thx for your answer, i have tried to set the bios setting to ecp and epp, but it still doesn't work. Other hints?
_________________
- Linux is sexy -
guru@linux:~> who | egrep -i 'blonde|black|brown' | talk && cd ~; wine; talk; touch; unzip; touch; strip; gasp; finger; mount; fsck; more; yes; gasp; umount; make clean; sleep; |
|
| Back to top |
|
|
Cintra
Advocate
Joined: 03 Apr 2004
Posts: 2111
Location: Norway
|
| Posted: Mon Jan 16, 2006 11:26 am Post subject: |
|
|
do you have ppds in make.conf? and are you using gimp-print?
_________________
"I am not bound to please thee with my answers" W.S. |
|
| Back to top |
|
|
sammy2ooo
Apprentice
Joined: 26 May 2004
Posts: 225
|
| Posted: Mon Jan 16, 2006 1:53 pm Post subject: |
|
|
| Quote: | | do you have ppds in make.conf?... |
no, i don't have ppds in make.conf.
| Quote: |
uranos linux # emerge -va cups
These are the packages that I would merge, in order:
Calculating depeuranos linux # emerge -va cups
These are the packages that I would merge, in order:
Calculating dependencies ...done!
[ebuild R ] net-print/cups-1.1.23-r4 -cjk -gnutls -nls +pam -samba -slp +ssl 0 kB
Total size of downloads: 0 kB
Do you want me to merge these packages? [Yes/No]
|
i don't see how the ppds use flag should affect cups
| Quote: | | ... and are you using gimp-print? |
no, I am using only cups
_________________
- Linux is sexy -
guru@linux:~> who | egrep -i 'blonde|black|brown' | talk && cd ~; wine; talk; touch; unzip; touch; strip; gasp; finger; mount; fsck; more; yes; gasp; umount; make clean; sleep; |
|
| Back to top |
|
|
Cintra
Advocate
Joined: 03 Apr 2004
Posts: 2111
Location: Norway
|
| Posted: Mon Jan 16, 2006 4:36 pm Post subject: |
|
|
ok.. I'm using gimp-print and then the ppds USE flag is needed.
I went over to gimp-print with cups rather than basic cups as the print quality was better with my Epson.
could be worth a try, they have the fs-680 driver.
mvh
edit: do you see anything when you turn the printer on/off in
| Code: | | mtail -f --lines=20 /var/log/messages |
and do you have anything in the /etc/cups/ppd folder?
anything in /var/log/cups/error_log ?
_________________
"I am not bound to please thee with my answers" W.S. |
|
| Back to top |
|
|
XenoTerraCide
Veteran
Joined: 18 Jan 2004
Posts: 1418
Location: MI, USA
|
| Posted: Mon Jan 16, 2006 9:14 pm Post subject: |
|
|
I submitted a bug report for the english version the instruction's on how to get a .ppd online are incomplete at best. and wrong. but gentoo has ignored me. https://bugs.gentoo.org/show_bug.cgi?id=117876 I hope what I told them to change helps you. there are a few things that need to be done differently also read the cups/clamav/samba docs and read the cups part.[/quote]
_________________
I don't hang out here anymore, try asking on http://unix.stackexchange.com/ if you want my help. |
|
| Back to top |
|
|
sammy2ooo
Apprentice
Joined: 26 May 2004
Posts: 225
|
| Posted: Tue Jan 17, 2006 7:50 am Post subject: |
|
|
| Cintra wrote: | ...
edit: do you see anything when you turn the printer on/off in
| Code: | | mtail -f --lines=20 /var/log/messages |
and do you have anything in the /etc/cups/ppd folder?
anything in /var/log/cups/error_log ? |
no, if turn my printer off and back on, I dont see anything within /var/log/messages.
/var/log/cups/error_log
| Quote: |
I [17/Jan/2006:08:43:06 +0100] Listening to 0:631
I [17/Jan/2006:08:43:06 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [17/Jan/2006:08:43:06 +0100] Configured for up to 100 clients.
I [17/Jan/2006:08:43:06 +0100] Allowing up to 100 client connections per host.
I [17/Jan/2006:08:43:06 +0100] Full reload is required.
I [17/Jan/2006:08:43:06 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 16 PPDs...
I [17/Jan/2006:08:43:06 +0100] LoadPPDs: No new or changed PPDs...
I [17/Jan/2006:08:43:06 +0100] Full reload complete.
I [17/Jan/2006:08:43:19 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid
=8034)
I [17/Jan/2006:08:43:23 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid
=8035)
I [17/Jan/2006:08:43:24 +0100] Adding start banner page "none" to job 16.
I [17/Jan/2006:08:43:24 +0100] Adding end banner page "none" to job 16.
I [17/Jan/2006:08:43:24 +0100] Job 16 queued on 'printer' by ''.
I [17/Jan/2006:08:43:24 +0100] Started filter /usr/lib/cups/filter/pstops (PID 8
036) for job 16.
I [17/Jan/2006:08:43:24 +0100] Started filter /usr/lib/cups/filter/foomatic-rip
(PID 8037) for job 16.
I [17/Jan/2006:08:43:24 +0100] Started backend /usr/lib/cups/backend/parallel (P
ID 8038) for joI [17/Jan/2006:08:43:06 +0100] Listening to 0:631
I [17/Jan/2006:08:43:06 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [17/Jan/2006:08:43:06 +0100] Configured for up to 100 clients.
I [17/Jan/2006:08:43:06 +0100] Allowing up to 100 client connections per host.
I [17/Jan/2006:08:43:06 +0100] Full reload is required.
I [17/Jan/2006:08:43:06 +0100] LoadPPDs: Read "/etc/cups/ppds.dat", 16 PPDs...
I [17/Jan/2006:08:43:06 +0100] LoadPPDs: No new or changed PPDs...
I [17/Jan/2006:08:43:06 +0100] Full reload complete.
I [17/Jan/2006:08:43:19 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid
=8034)
I [17/Jan/2006:08:43:23 +0100] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid
=8035)
I [17/Jan/2006:08:43:24 +0100] Adding start banner page "none" to job 16.
I [17/Jan/2006:08:43:24 +0100] Adding end banner page "none" to job 16.
I [17/Jan/2006:08:43:24 +0100] Job 16 queued on 'printer' by ''.
I [17/Jan/2006:08:43:24 +0100] Started filter /usr/lib/cups/filter/pstops (PID 8
036) for job 16.
I [17/Jan/2006:08:43:24 +0100] Started filter /usr/lib/cups/filter/foomatic-rip
(PID 8037) for job 16.
I [17/Jan/2006:08:43:24 +0100] Started backend /usr/lib/cups/backend/parallel (P
ID 8038) for job 16.
E [17/Jan/2006:08:43:24 +0100] PID 8037 stopped with status 22!
I [17/Jan/2006:08:43:24 +0100] Hint: Try setting the LogLevel to "debug" to find
out more.
b 16.
|
and after setting the LogLevel to debug:
/var/log/cups/error_log
| Quote: | D [17/Jan/2006:08:44:48 +0100] AddLocation: added location '/'
D [17/Jan/2006:08:44:48 +0100] DenyIP: / deny 00000000/00000000
D [17/Jan/2006:08:44:48 +0100] AllowIP: / allow 7f000001/ffffffff
D [17/Jan/2006:08:44:48 +0100] AddLocation: added location '/admin'
D [17/Jan/2006:08:44:48 +0100] DenyIP: /admin deny 00000000/00000000
D [17/Jan/2006:08:44:48 +0100] AllowIP: /admin allow 7f000001/ffffffff
I [17/Jan/2006:08:44:48 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [17/Jan/2006:08:44:48 +0100] Configured for up to 100 clients.
I [17/Jan/2006:08:44:48 +0100] Allowing up to 100 client connections per host.
I [17/Jan/2006:08:44:48 +0100] Full reload is required.
D [17/Jan/2006:08:44:48 +0100] LoadAllPrinters: Loading printer printer...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "scsi"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "parallel:/dev/lp0"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "socket"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "ipp"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "http"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "usb:/dev/usb/lp0"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "usb:/dev/usb/lp1"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "usb:/dev/usb/lp2"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "usb:/dev/usb/lp3"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "usb:/dev/usb/lp4"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "usb:/dev/usb/lp5"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "usb:/dev/usb/lp6"...
D [17/Jan/2006:08:44:48 +0100] LoadDevices: Added device "usb:/dev/usb/lp7"...
D [17/Jan/2006:08:45:13 +0100] banner_page = 0
D [17/Jan/2006:08:45:13 +0100] StartJob: argv = "printer","17","","Test Page","1","","/var/spool/cups/d00017-001"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[2]="USER=root"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[3]="CHARSET=utf-8"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[4]="LANG=en_US"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[5]="PPD=/etc/cups/ppd/printer.ppd"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[7]="RIP_MAX_CACHE=8m"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[9]="CONTENT_TYPE=application/postscript"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[10]="DEVICE_URI=parallel:/dev/lp0"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[11]="PRINTER=printer"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[14]="CUPS_SERVER=localhost"
D [17/Jan/2006:08:45:13 +0100] StartJob: envp[15]="IPP_PORT=631"
D [17/Jan/2006:08:45:13 +0100] StartJob: statusfds = [ 9 10 ]
D [17/Jan/2006:08:45:13 +0100] StartJob: filterfds[1] = [ 11 -1 ]
D [17/Jan/2006:08:45:13 +0100] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [17/Jan/2006:08:45:13 +0100] StartJob: filterfds[0] = [ 12 13 ]
D [17/Jan/2006:08:45:13 +0100] start_process("/usr/lib/cups/filter/pstops", 0xbfbe4ca0, 0xbfbe4010, 11, 13, 10)
I [17/Jan/2006:08:45:13 +0100] Started filter /usr/lib/cups/filter/pstops (PID 8163) for job 17.
D [17/Jan/2006:08:45:13 +0100] StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
D [17/Jan/2006:08:45:13 +0100] StartJob: filterfds[1] = [ 11 14 ]
D [17/Jan/2006:08:45:13 +0100] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbfbe4ca0, 0xbfbe4010, 12, 14, 10)
I [17/Jan/2006:08:45:13 +0100] Started filter /usr/lib/cups/filter/foomatic-rip (PID 8164) for job 17.
D [17/Jan/2006:08:45:13 +0100] StartJob: backend = "/usr/lib/cups/backend/parallel"
D [17/Jan/2006:08:45:13 +0100] StartJob: filterfds[0] = [ -1 12 ]
D [17/Jan/2006:08:45:13 +0100] start_process("/usr/lib/cups/backend/parallel", 0xbfbe4ca0, 0xbfbe4010, 11, 12, 10)
I [17/Jan/2006:08:45:13 +0100] Started backend /usr/lib/cups/backend/parallel (PID 8165) for job 17.
D [17/Jan/2006:08:45:13 +0100] ProcessIPPRequest: 7 status_code=0
E [17/Jan/2006:08:45:13 +0100] PID 8164 stopped with status 22!
D [17/Jan/2006:08:45:13 +0100] [Job 17] Page = 612x792; 18,14 to 594,778
D [17/Jan/2006:08:45:13 +0100] [Job 17] slowcollate=0, slowduplex=0, sloworder=0
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%BoundingBox: 0 0 612 792
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%Pages: 1
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%LanguageLevel: 1
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%DocumentData: Clean7Bit
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%DocumentSuppliedResources: procset testprint/1.1
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%Creator: Michael Sweet, Easy Software Products
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%CreationDate: May 11, 1999
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%Title: Test Page
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%EndComments
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%BeginProlog
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%BeginResource procset testprint 1.1 0
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%EndResource
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%EndProlog
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%Page: 1 1
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%Page: 1 1
D [17/Jan/2006:08:45:13 +0100] [Job 17] pw = 576.0, pl = 763.2
D [17/Jan/2006:08:45:13 +0100] [Job 17] PageLeft = 18.0, PageRight = 594.0
D [17/Jan/2006:08:45:13 +0100] [Job 17] PageTop = 777.6, PageBottom = 14.4
D [17/Jan/2006:08:45:13 +0100] [Job 17] PageWidth = 612.0, PageLength = 792.0
D [17/Jan/2006:08:45:13 +0100] [Job 17] 0 %%EOF
D [17/Jan/2006:08:45:13 +0100] [Job 17] Saw EOF!
D [17/Jan/2006:08:45:13 +0100] [Job 17] /usr/lib/cups/filter/foomatic-rip: No such file or directory
D [17/Jan/2006:08:45:13 +0100] CloseClient: 7
D [17/Jan/2006:08:45:13 +0100] ReadClient: 5 GET /favicon.ico HTTP/1.1
D [17/Jan/2006:08:45:13 +0100] SendError: 5 code=404 (Not Found)
D [17/Jan/2006:08:45:13 +0100] CloseClient: 5
D [17/Jan/2006:08:45:13 +0100] UpdateJob: job 17, file 0 is complete.
D [17/Jan/2006:08:45:13 +0100] CancelJob: id = 17
D [17/Jan/2006:08:45:13 +0100] StopJob: id = 17, force = 0
D [17/Jan/2006:08:45:13 +0100] StopJob: printer state is 3
|
/usr/lib/cups/filter/foomatic-rip: No such file or directory... so maybee I should emerge foomatic? I'll give it a try...
| XenoTerraCide wrote: |
I hope what I told them to change helps you. there are a few things that need to be done differently also read the cups/clamav/samba docs and read the cups part.
|
thx dude, but once I have restarted cupsd, the driver has been recognized and got listed within the webinterface.
| Quote: |
sammy@uranos ~ $ l /etc/cups/ppd/
total 20K
-rw-r--r-- 1 root root 19K Jan 16 06:59 printer.ppd
sammy@uranos ~ $ l /usr/share/cups/model/Kyocera-FS-680-hpijs.ppd
-rw-r--r-- 1 root root 19K Jan 15 21:36 /usr/share/cups/model/Kyocera-FS-680-hpijs.ppd
sammy@uranos ~ $ diff /etc/cups/ppd/printer.ppd /usr/share/cups/model/Kyocera-FS-680-hpijs.ppd
|
so /etc/cups/ppd/printer.ppd and /usr/share/cups/model/Kyo...ppd should be the same
_________________
- Linux is sexy -
guru@linux:~> who | egrep -i 'blonde|black|brown' | talk && cd ~; wine; talk; touch; unzip; touch; strip; gasp; finger; mount; fsck; more; yes; gasp; umount; make clean; sleep;
Last edited by sammy2ooo on Tue Jan 17, 2006 8:03 am; edited 2 times in total |
|
| Back to top |
|
|
sammy2ooo
Apprentice
Joined: 26 May 2004
Posts: 225
|
| Posted: Tue Jan 17, 2006 7:59 am Post subject: |
|
|
so after emerging foomatic the following shows up in /var/log/cups/error_log
| Quote: |
...
D [17/Jan/2006:08:54:39 +0100] StartJob: filterfds[1] = [ 11 14 ]
D [17/Jan/2006:08:54:39 +0100] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbf9f5770, 0xbf9f4ae0, 12, 14, 10)
I [17/Jan/2006:08:54:39 +0100] Started filter /usr/lib/cups/filter/foomatic-rip (PID 10691) for job 18.
D [17/Jan/2006:08:54:39 +0100] StartJob: backend = "/usr/lib/cups/backend/parallel"
D [17/Jan/2006:08:54:39 +0100] StartJob: filterfds[0] = [ -1 12 ]
D [17/Jan/2006:08:54:39 +0100] start_process("/usr/lib/cups/backend/parallel", 0xbf9f5770, 0xbf9f4ae0, 11, 12, 10)
I [17/Jan/2006:08:54:39 +0100] Started backend /usr/lib/cups/backend/parallel (PID 10692) for job 18.
D [17/Jan/2006:08:54:39 +0100] ProcessIPPRequest: 7 status_code=0
D [17/Jan/2006:08:54:39 +0100] [Job 18] Page = 612x792; 18,14 to 594,778
D [17/Jan/2006:08:54:39 +0100] [Job 18] slowcollate=0, slowduplex=0, sloworder=0
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%BoundingBox: 0 0 612 792
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%Pages: 1
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%LanguageLevel: 1
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%DocumentData: Clean7Bit
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%DocumentSuppliedResources: procset testprint/1.1
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%Creator: Michael Sweet, Easy Software Products
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%CreationDate: May 11, 1999
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%Title: Test Page
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%EndComments
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%BeginProlog
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%BeginResource procset testprint 1.1 0
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%EndResource
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%EndProlog
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%Page: 1 1
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%Page: 1 1
D [17/Jan/2006:08:54:39 +0100] [Job 18] pw = 576.0, pl = 763.2
D [17/Jan/2006:08:54:39 +0100] [Job 18] PageLeft = 18.0, PageRight = 594.0
D [17/Jan/2006:08:54:39 +0100] [Job 18] PageTop = 777.6, PageBottom = 14.4
D [17/Jan/2006:08:54:39 +0100] [Job 18] PageWidth = 612.0, PageLength = 792.0
D [17/Jan/2006:08:54:39 +0100] [Job 18] 0 %%EOF
D [17/Jan/2006:08:54:39 +0100] [Job 18] Saw EOF!
D [17/Jan/2006:08:54:39 +0100] CloseClient: 7
D [17/Jan/2006:08:54:40 +0100] ReadClient: 5 GET /favicon.ico HTTP/1.1
D [17/Jan/2006:08:54:40 +0100] SendError: 5 code=404 (Not Found)
D [17/Jan/2006:08:54:40 +0100] CloseClient: 5
D [17/Jan/2006:08:54:40 +0100] [Job 18] foomatic-rip version $Revision: 3.43.2.6 $ running...
D [17/Jan/2006:08:54:40 +0100] [Job 18] Parsing PPD file ...
D [17/Jan/2006:08:54:40 +0100] [Job 18] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option ColorSpace
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option Resolution
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option PageSize
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option PageRegion
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option Model
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option PrintoutMode
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option ImageableArea
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option PaperDimension
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option InputSlot
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option Duplex
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option Quality
D [17/Jan/2006:08:54:40 +0100] [Job 18] Added option Font
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] Parameter Summary
D [17/Jan/2006:08:54:40 +0100] [Job 18] -----------------
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] Spooler: cups
D [17/Jan/2006:08:54:40 +0100] [Job 18] Printer: printer
D [17/Jan/2006:08:54:40 +0100] [Job 18] PPD file: /etc/cups/ppd/printer.ppd
D [17/Jan/2006:08:54:40 +0100] [Job 18] Printer model: Kyocera FS-680 Foomatic/hpijs (recommended)
D [17/Jan/2006:08:54:40 +0100] [Job 18] Job title: Test Page
D [17/Jan/2006:08:54:40 +0100] [Job 18] File(s) to be printed:
D [17/Jan/2006:08:54:40 +0100] [Job 18] <STDIN>
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] ================================================
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] File: <STDIN>
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] ================================================
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] Reading PostScript input ...
D [17/Jan/2006:08:54:40 +0100] [Job 18] --> This document is DSC-conforming!
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] -----------
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %%BeginProlog
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %%EndProlog
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] -----------
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %%BeginSetup
D [17/Jan/2006:08:54:40 +0100] [Job 18] Inserting PostScript code for CUPS' page accounting
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %%BeginFeature: *PrintoutMode Normal
D [17/Jan/2006:08:54:40 +0100] [Job 18] Option: PrintoutMode=Normal --> Setting option
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %% FoomaticRIPOptionSetting: PrintoutMode=Normal
D [17/Jan/2006:08:54:40 +0100] [Job 18] Option: PrintoutMode=Normal --> Setting option
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %%BeginFeature: *InputSlot Default
D [17/Jan/2006:08:54:40 +0100] [Job 18] Option: InputSlot=Default --> Setting option
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %% FoomaticRIPOptionSetting: InputSlot=Default
D [17/Jan/2006:08:54:40 +0100] [Job 18] Option: InputSlot=Default --> Setting option
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %%BeginFeature: *Quality FromPrintoutMode
D [17/Jan/2006:08:54:40 +0100] [Job 18] Option: Quality=FromPrintoutMode --> Setting option
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %% FoomaticRIPOptionSetting: Quality=@PrintoutMode
D [17/Jan/2006:08:54:40 +0100] [Job 18] Option: Quality=FromPrintoutMode --> Setting option
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %%BeginFeature: *PageRegion Letter
D [17/Jan/2006:08:54:40 +0100] [Job 18] Option: PageRegion=Letter --> Option will be set by PostScript interpreter
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %% FoomaticRIPOptionSetting: PageSize=Letter
D [17/Jan/2006:08:54:40 +0100] [Job 18] Option: PageSize=Letter --> Setting option
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %%BeginFeature: *Duplex None
D [17/Jan/2006:08:54:40 +0100] [Job 18] Option: Duplex=None --> Setting option
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %% FoomaticRIPOptionSetting: Duplex=None
D [17/Jan/2006:08:54:40 +0100] [Job 18] Option: Duplex=None --> Setting option
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found: %%EndSetup
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] -----------
D [17/Jan/2006:08:54:40 +0100] [Job 18] New page: 1 1
D [17/Jan/2006:08:54:40 +0100] [Job 18] Inserting option code into "PageSetup" section.
D [17/Jan/2006:08:54:40 +0100] [Job 18] No page header or page header not DSC-conforming
D [17/Jan/2006:08:54:40 +0100] [Job 18] Stopping search for page header options
D [17/Jan/2006:08:54:40 +0100] [Job 18] Found:
D [17/Jan/2006:08:54:40 +0100] [Job 18] pageHeight sub % Move down...
D [17/Jan/2006:08:54:40 +0100] [Job 18] --> Output goes directly to the renderer now.
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] Starting renderer
D [17/Jan/2006:08:54:40 +0100] [Job 18] JCL: <job data>
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] renderer PID kid4=10694
D [17/Jan/2006:08:54:40 +0100] [Job 18] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDeviceManufacturer="HEWLETT-PA
CKARD" -sDeviceModel="HP LaserJet" -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -dDuplex=false -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=0,Quality:MediaT
ype=0,Quality:PenSet=0,PS:MediaPosition=7 -dIjsUseOutputFD -sOutputFile=- -
D [17/Jan/2006:08:54:40 +0100] [Job 18]
D [17/Jan/2006:08:54:40 +0100] [Job 18] Closing renderer
D [17/Jan/2006:08:54:40 +0100] [Job 18] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-sDeviceManufacturer
=HEWLETT-PACKARD' '-sDeviceModel=HP LaserJet' '-dDEVICEWIDTHPOINTS=612' '-dDEVICEHEIGHTPOINTS=792' '-dDuplex=false' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorM
ode=0,Quality:MediaType=0,Quality:PenSet=0,PS:MediaPosition=7' '-dIjsUseOutputFD' '-sOutputFile=| cat >&3' '/dev/fd/0' 3>&1 1>&2
D [17/Jan/2006:08:54:41 +0100] [Job 18] sh: hpijs: command not found
D [17/Jan/2006:08:54:41 +0100] [Job 18] ESP Ghostscript 7.07.1: Can't start ijs server "hpijs"
D [17/Jan/2006:08:54:41 +0100] [Job 18] **** Unable to open the initial device, quitting.
D [17/Jan/2006:08:54:41 +0100] [Job 18] renderer return value: 1
D [17/Jan/2006:08:54:41 +0100] [Job 18] renderer received signal: 1
D [17/Jan/2006:08:54:41 +0100] [Job 18] Process dying with "Possible error on renderer command line or PostScript error. Check options.", exit stat: 3
D [17/Jan/2006:08:54:41 +0100] [Job 18] Possible error on renderer command line or PostScript error. Check options.
D [17/Jan/2006:08:54:41 +0100] [Job 18] KID3 exited with status 3
D [17/Jan/2006:08:54:41 +0100] [Job 18] Renderer exit stat: 3
D [17/Jan/2006:08:54:41 +0100] [Job 18] Renderer process finished
D [17/Jan/2006:08:54:41 +0100] [Job 18] Killing process 10693 (KID3)
D [17/Jan/2006:08:54:41 +0100] [Job 18] Process dying with "Error closing renderer", exit stat: 3
D [17/Jan/2006:08:54:41 +0100] [Job 18] Error closing renderer
E [17/Jan/2006:08:54:41 +0100] PID 10691 stopped with status 3!
D [17/Jan/2006:08:54:41 +0100] [Job 18] tail process done writing data to STDOUT
D [17/Jan/2006:08:54:41 +0100] [Job 18] KID4 finished
D [17/Jan/2006:08:54:41 +0100] UpdateJob: job 18, file 0 is complete.
D [17/Jan/2006:08:54:41 +0100] CancelJob: id = 18
D [17/Jan/2006:08:54:41 +0100] StopJob: id = 18, force = 0
D [17/Jan/2006:08:54:41 +0100] StopJob: printer state is 3
|
this looks a bit better now 
but I think the problem is somewhere deeper!
| Quote: | uranos ~ # dmesg | grep lp
On node 0 totalpages: 131056
Calibrating delay using timer specific routine.. 4005.60 BogoMIPS (lpj=8011201)
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
lp: driver loaded but no devices found
lp0: using parport0 (interrupt-driven).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
|
| Quote: |
uranos ~ # lpstat -a
printer accepting requests since Jan 01 00:00
|
_________________
- Linux is sexy -
guru@linux:~> who | egrep -i 'blonde|black|brown' | talk && cd ~; wine; talk; touch; unzip; touch; strip; gasp; finger; mount; fsck; more; yes; gasp; umount; make clean; sleep; |
|
| Back to top |
|
|
XenoTerraCide
Veteran
Joined: 18 Jan 2004
Posts: 1418
Location: MI, USA
|
| Posted: Tue Jan 17, 2006 4:15 pm Post subject: |
|
|
do you have hpijs?
_________________
I don't hang out here anymore, try asking on http://unix.stackexchange.com/ if you want my help. |
|
| Back to top |
|
|
Karsten from Berlin
Guru
Joined: 28 Feb 2004
Posts: 446
Location: Berlin/Germany
|
| Posted: Tue Jan 17, 2006 4:20 pm Post subject: |
|
|
1. Does the testpage appear out of the CUPS' configuration webpage?
2. Is it a problem to print from Windows boxes? If yes, go to /etc/cups/mime.* - go to the end of the two files and uncomment the lines which have s.th. with "octet" in it. The restart cupsd.
_________________
Heaven: The police are British, the chefs Italian, the mechanics German, the lovers French and it's organized by the Swiss.
Hell: The police are German, the chefs British, the mechanics French, the lovers Swiss and it's organized by the Italians. |
|
| Back to top |
|
|
sammy2ooo
Apprentice
Joined: 26 May 2004
Posts: 225
|
| Posted: Tue Jan 17, 2006 11:01 pm Post subject: |
|
|
| XenoTerraCide wrote: | | do you have hpijs? |
no, should I?
| Quote: |
Description: The HP Inkjet server for Ghostscript. Provides best output for HP Inkjet Printers and some LaserJets
|
| Karsten from Berlin wrote: |
1. Does the testpage appear out of the CUPS' configuration webpage?
|
no, the testpage doesn't appear. My printer shows no reaction.
| Karsten from Berlin wrote: |
2. Is it a problem to print from Windows boxes? If yes, go to /etc/cups/mime.* - go to the end of the two files and uncomment the lines which have s.th. with "octet" in it. The restart cupsd.
|
what do you exactly meen? printing over network? I haven't anything special network configuration done to cups. Normaly I have used this printer pluged to a laptop running windows xp. I had no problem there.
I am almost sure that there must be something wrong with my lpt interface or with my bios. I will try updating my bios.
_________________
- Linux is sexy -
guru@linux:~> who | egrep -i 'blonde|black|brown' | talk && cd ~; wine; talk; touch; unzip; touch; strip; gasp; finger; mount; fsck; more; yes; gasp; umount; make clean; sleep; |
|
| Back to top |
|
|
XenoTerraCide
Veteran
Joined: 18 Jan 2004
Posts: 1418
Location: MI, USA
|
| Posted: Tue Jan 17, 2006 11:36 pm Post subject: |
|
|
you might try getting hpijs | Quote: | D [17/Jan/2006:08:54:41 +0100] [Job 18] sh: hpijs: command not found
D [17/Jan/2006:08:54:41 +0100] [Job 18] ESP Ghostscript 7.07.1: Can't start ijs server "hpijs" |
it may need it... I don't know that though... all that looked like gibberish to me...
_________________
I don't hang out here anymore, try asking on http://unix.stackexchange.com/ if you want my help. |
|
| Back to top |
|
|
sammy2ooo
Apprentice
Joined: 26 May 2004
Posts: 225
|
| Posted: Wed Jan 18, 2006 7:39 am Post subject: |
|
|
| XenoTerraCide wrote: | you might try getting hpijs | Quote: | D [17/Jan/2006:08:54:41 +0100] [Job 18] sh: hpijs: command not found
D [17/Jan/2006:08:54:41 +0100] [Job 18] ESP Ghostscript 7.07.1: Can't start ijs server "hpijs" |
it may need it... I don't know that though... all that looked like gibberish to me... |
emerging hpijs did the trick, now it works like charm... but why the hack?  This is the first time I am installing hpijs to print via cups!?!
However thanks for all the input.
_________________
- Linux is sexy -
guru@linux:~> who | egrep -i 'blonde|black|brown' | talk && cd ~; wine; talk; touch; unzip; touch; strip; gasp; finger; mount; fsck; more; yes; gasp; umount; make clean; sleep; |
|
| Back to top |
|
|
XenoTerraCide
Veteran
Joined: 18 Jan 2004
Posts: 1418
Location: MI, USA
|
| Posted: Wed Jan 18, 2006 3:00 pm Post subject: |
|
|
glad it worked for you. don't know why you'd need it but... if it works...
_________________
I don't hang out here anymore, try asking on http://unix.stackexchange.com/ if you want my help. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
