1280x1024 on nvidia

[dracony]

i cant get 1280x1024 mode working on nvidia
i added "1280x1024" to modes line in xorg.conf, but nothing happened.
It works well om my intel card
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/local/share/fonts"
FontPath "/usr/share/fonts"
FontPath "/usr/X11R6/lib/X11/fonts"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/default"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/ukr"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/artwiz"
FontPath "/usr/share/fonts/urw-fonts"
EndSection

Section "Module"
Load "glx"
Load "record"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "6 7"
Option "Buttons" "7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "DigitalVibrance" # <i>
#Option "NoFlip" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "NoLogo" # [<bool>]
#Option "UBB" # [<bool>]
#Option "Stereo" # <i>
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "VideoKey" # <i>
#Option "NvAGP" # <i>
#Option "IgnoreEDID" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ConnectedMonitor" # <str>
#Option "ConnectedMonitors" # <str>
#Option "TVStandard" # <str>
#Option "TVOutFormat" # <str>
#Option "RenderAccel" # [<bool>]
#Option "CursorShadow" # [<bool>]
#Option "CursorShadowAlpha" # <i>
#Option "CursorShadowXOffset" # <i>
#Option "CursorShadowYOffset" # <i>
#Option "UseEdidFreqs" # [<bool>]
#Option "FlatPanelProperties" # <str>
#Option "TwinView" # [<bool>]
#Option "TwinViewOrientation" # <str>
#Option "SecondMonitorHorizSync" # <str>
#Option "SecondMonitorVertRefresh" # <str>
#Option "MetaModes" # <str>
#Option "UseInt10Module" # [<bool>]
#Option "NoTwinViewXineramaInfo" # [<bool>]
#Option "NoRenderExtension" # [<bool>]
#Option "Overlay" # [<bool>]
#Option "CIOverlay" # [<bool>]
#Option "ForceEmulatedOverlay" # [<bool>]
#Option "TransparentIndex" # <i>
#Option "OverlayDefaultVisual" # [<bool>]
#Option "NvEmulate" # <i>
#Option "NoBandWidthTest" # [<bool>]
#Option "CustomEDID-CRT-0" # <str>
#Option "CustomEDID-CRT-1" # <str>
#Option "CustomEDID-DFP-0" # <str>
#Option "CustomEDID-DFP-1" # <str>
#Option "CustomEDID-TV-0" # <str>
#Option "CustomEDID-TV-1" # <str>
#Option "TVOverScan" # <f>
#Option "IgnoreDisplayDevices" # <str>
#Option "MultisampleCompatibility" # [<bool>]
#Option "RegistryDwords" # <str>
#Option "RegistryBinary" # <str>
#Option "NoPowerConnectorCheck" # [<bool>]
#Option "AllowDFPStereo" # [<bool>]
#Option "XvMCUsesTextures" # [<bool>]
#Option "HorizSync" "1280x1024"
Option "VertRefresh" "85"
#Option "AllowGLXWithComposite" # [<bool>]
#Option "RandRRotation" # [<bool>]
#Option "ExactModeTimingsDVI" # [<bool>]
#Option "Coolbits" # <i>
#Option "AllowDDCCI" # [<bool>]
#Option "ConstantFrameRateHint" # [<bool>]
#Option "LoadKernelModule" # [<bool>]
#Option "ClearCube" # [<bool>]
#Option "PredefinedTimings" # <i>
#Option "EmulatedOverlaysTimerMs" # <i>
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NV18 [GeForce4 MX 440 AGP 8x]"
BusID "PCI:3:0:0"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card1"
Driver "i810"
VendorName "Intel Corp."
BoardName "82845G/GL [Brookdale-G] Chipset Integrated Graphics Device"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
DefaultColorDepth 24
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
_________________
gentoo never dies. If it doesnt work, do the most idiotic thing you can, and to prevent it from all unnessecary warnings use --force. This will break it, and while fixing, you will fix everything
(worked even when i deleted /sbin)

[H3g3m0n]

This might be caused by your 2nd screen definition not having a DefaultColorDepth 24.

Check /var/log/Xorg.0.log for error messages or warnings.

Somtimes monitors report that they arn't capable of some resolutions, if thats the case then you need to lookup the IgnoreEDID option for your Device section.

[dracony]

the problem was i locked 85 hz, and it couldnt run 1280x1024 with it.

but running on 60hz is horrible.
Is there any way to increase Vert refresh, when using 1280x1024, cause my eyes hurt.
it works well on windows.
_________________
gentoo never dies. If it doesnt work, do the most idiotic thing you can, and to prevent it from all unnessecary warnings use --force. This will break it, and while fixing, you will fix everything
(worked even when i deleted /sbin)

[Cintra]

what is your screen model? have you tried 75? which nvidia-kernel?
_________________
"I am not bound to please thee with my answers" W.S.

[dracony]

nvidia-kernel 1.0.7676
gnome resolution changer allows only 60 for 1280x1024 and higher.
If i lock the vert refresh i cant change resolution.
Maybe i nead not newer kernel-module, but newer x driver.
_________________
gentoo never dies. If it doesnt work, do the most idiotic thing you can, and to prevent it from all unnessecary warnings use --force. This will break it, and while fixing, you will fix everything
(worked even when i deleted /sbin)