Gentoo Forums :: View topic - 'kleines' problem nach update [geloest]

'kleines' problem nach update [geloest]

View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Gentoo Forums Forum Index

Deutsches Forum (German)

View previous topic :: View next topic

Author

Message

sm0ker
n00b
n00b

Joined: 20 Jan 2006
Posts: 28

Posted: Fri Jan 20, 2006 5:09 pm Post subject: 'kleines' problem nach update [geloest]

hi.
gentoo installiert mit nem stage3 archiv. dann: emerge --sync && emerge --update --deep --newuse world && emerge --depclean && revdep-rebuild
danach etc-update gemacht, alle configs editiert! nun kommt mein problem:

Code:

Blocks (total/free): 1431793/1060283 by 4096 bytes
Filesystem is clean
Replaying journal..
Reiserfs journal '/dev/hdb4' in blocks [18..8211]: 0 transactions replayed
Checking internal tree..finished [ ok ] * Mounting local filesystems ...
mount: /dev/hdb4 already mounted or /backup busy
* Some local filesystem failed to mount [ !! ] * Mounting USB device filesystem (usbfs) ...
mount: usbfs already mounted or /proc/bus/usb busy
mount: according to mtab, usbfs is already mounted on /proc/bus/usb
* Failed to mount USB device filesystem [ !! ] * Activating (possibly) more swap ... [ ok ]

das kommt bei jedem booten! mal mountet er usbfs normal aber /dev/hdb4 meckert er immer.

Code:

dann ist /dev/shm 2 mal gemountet obwohl es nur einmal in der fstab steht!!!

Code:

spacken ~ # emerge --info
Portage 2.1_pre3-r1 (default-linux/x86/2005.1, gcc-3.3.6, glibc-2.3.6-r2, 2.6.15-gentoo-r1 i686)
=================================================================
System uname: 2.6.15-gentoo-r1 i686 AMD Athlon(tm) XP 1600+
Gentoo Base System version 1.12.0_pre14
distcc 2.18.3 i686-pc-linux-gnu (protocols 1 and 2) (default port 3632) [enabled]
ccache version 2.4 [enabled]
dev-lang/python: 2.3.5-r2, 2.4.2
sys-apps/sandbox: 1.2.17
sys-devel/autoconf: 2.13, 2.59-r7
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1
sys-devel/binutils: 2.16.1-r1
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.11-r3
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-march=athlon-xp -pipe -O3"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/share/config /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d"
CXXFLAGS="-march=athlon-xp -pipe -O3"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig ccache distcc distlocks parallel-fetch sandbox sfperms strict"
GENTOO_MIRRORS="ftp://ftp.tu-clausthal.de/pub/linux/gentoo/ ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/gentoo http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/ ftp://linux.rz.ruhr-uni-bochum.de/gentoo-mirror/ http://ftp.uni-erlangen.de/pub/mirrors/gentoo ftp://ftp.uni-erlangen.de/pub/mirrors/gentoo ftp://ftp.join.uni-muenster.de/pub/linux/distributions/gentoo ftp://ftp.wh2.tu-dresden.de/pub/mirrors/gentoo ftp://ftp.rz.tu-bs.de/pub/mirror/ftp.gentoo.org/gentoo-distfiles/ http://gentoo.intergenia.de "
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.europe.gentoo.org/gentoo-portage"
USE="x86 ansi apm bash-completion batch berkdb bootsplash bzip2 c++ cdrom cracklib crypt curl expat fbcon ftp gdbm iproute2 ipv6 john libg++ libwww ncurses nls pam pam_chroot pam_console pam_timestamp perl postfix python readline reiserfs screen ssl syslog tcltk tcpd udev zlib elibc_glibc kernel_linux userland_GNU"
Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY

spacken ~ #

jemand eine idee was da schief laeuft? bin fuer jeden tipp dankbar....

Last edited by sm0ker on Fri Jan 20, 2006 5:51 pm; edited 1 time in total

SvenFischer
Veteran
Veteran

Joined: 05 Feb 2003
Posts: 1033
Location: Berlin

Posted: Fri Jan 20, 2006 5:19 pm Post subject:

Leider fehlt Deine /etc/fstab hier... Kommt der Fehler schon beim boot? -> dmesg mal anschauen. Willst Du nach dem Start mounten? -> /tail -f /var/log/messages gleichzeit zum mount laufen lassen. Evtl. wir shm schon eingebunden durch udev, einen Eintrag in der fstab würde ich mal auskommentieren. _________________ Core2Duo, 4GB RAM, AMD/ATI 4850 and nice person in front!

sm0ker
n00b
n00b

Joined: 20 Jan 2006
Posts: 28

Posted: Fri Jan 20, 2006 5:34 pm Post subject:

[/code]also hier die fstab:

Code:

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hdb2 / reiserfs defaults 0 1
/dev/hdb1 none swap sw 0 0
/dev/hdb3 /usr/portage/distfiles reiserfs defaults 0 1
/dev/hdb4 /backup reiserfs defaults 0 1
#/dev/fd0 /mnt/floppy auto noauto 0 0

# NOTE: The next line is critical for boot!
proc /proc proc defaults 0 0

# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0

habe /dev/shm auch schon aukommentiert. dann mountet er es gar nimmer!
hier die ausgabe von dmesg:

Code:

Linux version 2.6.15-gentoo-r1 (root@livecd) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 Tue Jan 17 16:07:35 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ee000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa310
ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0000
ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0030
ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/hdb2 vga=791
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1394.209 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514188k/524224k available (3061k kernel code, 9504k reserved, 1083k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2791.36 BogoMIPS (lpj=5582736)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) XP 1600+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 1c20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS18 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: cde00000-cfefffff
PREFETCH window: adc00000-cdcfffff
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
audit: initializing netlink socket (disabled)
audit(1137781670.004:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.25 [Flags: R/W].
SGI XFS with realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xb0000000, mapped to 0xe0880000, using 3072k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:e2d0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: Mode is VGA compatible
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 735 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
Floppy drive(s): fd0 is 1.44M
input: AT Translated Set 2 keyboard as /class/input/input1
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
nbd: registered device at major 43
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS735 ATA 100 (2nd gen) controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y120L0, ATA DISK drive
hdb: IBM-DJNA-351520, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
hdd: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
hdb: max request size: 128KiB
hdb: 30033360 sectors (15377 MB) w/430KiB Cache, CHS=29795/16/63, UDMA(33)
hdb: cache flushes not supported
hdb: hdb1 hdb2 hdb3 hdb4
hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:02.2: OHCI Host Controller
ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.2: irq 5, io mem 0xcfffe000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:02.3: OHCI Host Controller
ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.3: irq 10, io mem 0xcffff000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
input: USB 2Axes8Keys GamePad as /class/input/input2
input: USB HID v1.00 Joystick [USB 2Axes8Keys GamePad ] on usb-0000:00:02.2-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
oprofile: using timer interrupt.
pktgen v2.63: Packet Generator for packet performance testing.
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 5, 131072 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
CCID: Registered CCID 3 (ccid3)
SCTP: Hash tables configured (established 16384 bind 32768)
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 PS2K UAR1 UAR2 USB1 USB2 LAN MDM AUD SLPB
ACPI: (supports S0 S1 S4 S5)
ReiserFS: hdb2: found reiserfs format "3.6" with standard journal
usb 2-1: new full speed USB device using ohci_hcd and address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
ReiserFS: hdb2: using ordered data mode
ReiserFS: hdb2: journal params: device hdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb2: checking transaction log (hdb2)
ReiserFS: hdb2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 176k freed
usb 2-1.4: new low speed USB device using ohci_hcd and address 3
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input3
input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.3-1.4
Adding 497972k swap on /dev/hdb1. Priority:-1 extents:1 across:497972k
Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12
tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1.
eth0: ADMtek Comet rev 17 at e0868c00, 00:00:E8:05:00:C1, IRQ 12.
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ReiserFS: hdb3: found reiserfs format "3.6" with standard journal
ReiserFS: hdb3: using ordered data mode
ReiserFS: hdb3: journal params: device hdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb3: checking transaction log (hdb3)
ReiserFS: hdb3: Using r5 hash to sort names
ReiserFS: hdb4: found reiserfs format "3.6" with standard journal
ReiserFS: hdb4: using ordered data mode
ReiserFS: hdb4: journal params: device hdb4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb4: checking transaction log (hdb4)
ReiserFS: hdb4: Using r5 hash to sort names
0000:00:0d.0: tulip_stop_rxtx() failed
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
eth0: no IPv6 routers present

kann aber keine fehler finden...

sm0ker
n00b
n00b

Joined: 20 Jan 2006
Posts: 28

Posted: Fri Jan 20, 2006 5:52 pm Post subject:

dank einem tip im irc ist das 'problem' geloest. musste nur in der fstab die reiser flags auf 0 0 setzen. nun geht alles ohne fehler beim booten. danke fuer die schnelle hilfe!!!

Display posts from previous:

	Gentoo Forums Forum Index Deutsches Forum (German)	All times are GMT
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Copyright 2001-2025 Gentoo Foundation, Inc. Designed by Kyle Manna © 2003; Style derived from original subSilver theme. | Hosting by Gossamer Threads Inc. © | Powered by phpBB 2.0.23-gentoo-p11 © 2001, 2002 phpBB Group
Privacy Policy