| View previous topic :: View next topic |
| Author |
Message |
benjamin200
Veteran
Joined: 01 Feb 2004
Posts: 1426
Location: DE Munich
|
 Posted: Thu Jan 26, 2006 9:20 pm Post subject: X11Forwarding via SSH, Couldn't load XKB keymap |
 |
|
Hi,
ich möchte über ssh -X eine XSession über das lokale Netz starten.
SSH Server (sshd_config)
X11Forwarding yes
SSH Client (ssh_config)
ForwardX11 yes
nach dem Anmelden auf der entfernten Konsole tippe ich "startx --:2" und erhalte folgende Fehlermeldung:
| Code: |
startx -- :2
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/server:2
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11-gentoo-r5 i686 [ELF]
Current Operating System: Linux server 2.6.14-gentoo-r2 #1 Tue Nov 15 01:23:42 CET 2005 i686
Build Date: 30 May 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.2.log", Time: Thu Jan 26 20:34:16 2006
(==) Using config file: "/etc/X11/xorg.conf"
Using vt 8
Symbol __glXgetActiveScreen from module /usr/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXgetActiveScreen from module /usr/lib/modules/extensions/libdri.a is unresolved!
(EE) Failed to initialize GLX extension (NVIDIA X driver not found)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Cannot open "/var/tmp/server-2.xkm" to write keyboard description
> Exiting
(EE) Couldn't load XKB keymap, falling back to pre-XKB keymap
Failed to read: session.tabs
Setting default value
Failed to read: session.ignoreBorder
Setting default value
Failed to read: session.forcePseudoTransparency
Setting default value
Failed to read: session.numLayers
Setting default value
Failed to read: session.tabPadding
Setting default value
Failed to read: session.focusTabMinWidth
Setting default value
Failed to read: session.slitlistFile
Setting default value
Failed to read: session.groupFile
etc.
etc.
etc.
|
Was mach ich falsch? An die Hardware kann das ja wohl nicht gebunden sein?
Auf der Client Seite habe ich xhost ausgeführt und die lokale und remote gentoo maschine als der USER über den letztendlich auch die Connection stattfinden soll hinzugefügt. Hat jemand eine Idee was mit der keymap compiler los ist?
_________________
Gentoo Linux Stage1 / Kernel 2.6.18
AMD Athlon64 3500+ on Asus A8N-E / 1024 MB DDR-RAM / ATI X700 PCIe
Take LINUX and forget Blue Screens
Last edited by benjamin200 on Fri Jan 27, 2006 4:35 pm; edited 1 time in total |
|
| Back to top |
|
 |
cng
Guru
Joined: 25 Feb 2004
Posts: 332
Location: Appenzell
|
| Posted: Fri Jan 27, 2006 7:40 am Post subject: |
|
|
ich bin mir nicht ganz sicher. aber. hast du in der xorg.conf wirklich die xkb aktiviert?
_________________
Gentoo-Community - Your family
##################### |
|
| Back to top |
|
|
benjamin200
Veteran
Joined: 01 Feb 2004
Posts: 1426
Location: DE Munich
|
| Posted: Fri Jan 27, 2006 4:43 pm Post subject: |
|
|
| Quote: |
ich bin mir nicht ganz sicher. aber. hast du in der xorg.conf wirklich die xkb aktiviert?
|
Hallo cng,
du hast Recht, auf der Server Seite habe ich die Optionen für Xkb gesetzt, jedoch nicht auf der Server Seite.
| Code: |
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "de"
|
Das hab ich jetzt nachgeholt und den X-Server neugestartet. Leider aber immer noch die gleiche Fehlermeldung.
| Code: |
startx -- :2
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/server:2
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.14-gentoo-r2 i686 [ELF]
Current Operating System: Linux server 2.6.14-gentoo-r2 #1 Tue Nov 15 01:23:42 CET 2005 i686
Build Date: 26 January 2006
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.2.log", Time: Fri Jan 27 17:39:28 2006
(==) Using config file: "/etc/X11/xorg.conf"
Using vt 7
Symbol __glXgetActiveScreen from module /usr/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXgetActiveScreen from module /usr/lib/modules/extensions/libdri.a is unresolved!
(EE) Failed to initialize GLX extension (NVIDIA X driver not found)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Error: Cannot open "/var/tmp/server-2.xkm" to write keyboard description
> Exiting
(EE) Couldn't load XKB keymap, falling back to pre-XKB keymap
Failed to read: session.tabs
Setting default value
Failed to read: session.ignoreBorder
Setting default value
Failed to read: session.forcePseudoTransparency
Setting default value
Failed to read: session.numLayers
Setting default value
Failed to read: session.tabPadding
Setting default value
Failed to read: session.focusTabMinWidth
Setting default value
Failed to read: session.slitlistFile
Setting default value
Failed to read: session.groupFile
Setting default value
Failed to read: session.appsFile
Setting default value
Failed to read: session.tabsAttachArea
Setting default value
Failed to read: session.useMod1
Setting default value
apps file failure
Failed to read: session.screen0.imageDither
Setting default value
Failed to read: session.screen0.opaqueMove
Setting default value
Failed to read: session.screen0.sloppywindowgrouping
Setting default value
Failed to read: session.screen0.workspacewarping
Setting default value
Failed to read: session.screen0.desktopwheeling
Setting default value
Failed to read: session.screen0.autoRaise
Setting default value
Failed to read: session.screen0.clickRaises
Setting default value
Failed to read: session.screen0.decorateTransient
Setting default value
Failed to read: session.screen0.rootCommand
Setting default value
Failed to read: session.screen0.resizeMode
Setting default value
Failed to read: session.screen0.windowMenu
Setting default value
Failed to read: session.screen0.tabFocusModel
Setting default value
Failed to read: session.screen0.followModel
Setting default value
Failed to read: session.screen0.window.focus.alpha
Setting default value
Failed to read: session.screen0.window.unfocus.alpha
Setting default value
Failed to read: session.screen0.menu.alpha
Setting default value
Failed to read: session.screen0.menuDelay
Setting default value
Failed to read: session.screen0.menuDelayClose
Setting default value
Failed to read: session.screen0.menuMode
Setting default value
Failed to read: session.screen0.overlay.lineWidth
Setting default value
Failed to read: session.screen0.overlay.lineStyle
Setting default value
Failed to read: session.screen0.overlay.joinStyle
Setting default value
Failed to read: session.screen0.overlay.capStyle
Setting default value
Failed to read: session.screen0.windowScrollAction
Setting default value
Failed to read: session.screen0.windowScrollReverse
Setting default value
BScreen::BScreen: managing screen 0 using visual 0x21, depth 16
Failed to read: session.tabs
Setting default value
Failed to read: session.ignoreBorder
Setting default value
Failed to read: session.forcePseudoTransparency
Setting default value
Failed to read: session.numLayers
Setting default value
Failed to read: session.tabPadding
Setting default value
Failed to read: session.focusTabMinWidth
Setting default value
Failed to read: session.slitlistFile
Setting default value
Failed to read: session.groupFile
Setting default value
Failed to read: session.appsFile
Setting default value
Failed to read: session.tabsAttachArea
Setting default value
Failed to read: session.useMod1
Setting default value
Failed to read: session.screen0.imageDither
Setting default value
Failed to read: session.screen0.opaqueMove
Setting default value
Failed to read: session.screen0.sloppywindowgrouping
Setting default value
Failed to read: session.screen0.workspacewarping
Setting default value
Failed to read: session.screen0.desktopwheeling
Setting default value
Failed to read: session.screen0.autoRaise
Setting default value
Failed to read: session.screen0.clickRaises
Setting default value
Failed to read: session.screen0.decorateTransient
Setting default value
Failed to read: session.screen0.rootCommand
Setting default value
Failed to read: session.screen0.resizeMode
Setting default value
Failed to read: session.screen0.windowMenu
Setting default value
Failed to read: session.screen0.tabFocusModel
Setting default value
Failed to read: session.screen0.followModel
Setting default value
Failed to read: session.screen0.window.focus.alpha
Setting default value
Failed to read: session.screen0.window.unfocus.alpha
Setting default value
Failed to read: session.screen0.menu.alpha
Setting default value
Failed to read: session.screen0.menuDelay
Setting default value
Failed to read: session.screen0.menuDelayClose
Setting default value
Failed to read: session.screen0.menuMode
Setting default value
Failed to read: session.screen0.overlay.lineWidth
Setting default value
Failed to read: session.screen0.overlay.lineStyle
Setting default value
Failed to read: session.screen0.overlay.joinStyle
Setting default value
Failed to read: session.screen0.overlay.capStyle
Setting default value
Failed to read: session.screen0.windowScrollAction
Setting default value
Failed to read: session.screen0.windowScrollReverse
Setting default value
Failed to read: session.tabs
Setting default value
Failed to read: session.ignoreBorder
Setting default value
Failed to read: session.forcePseudoTransparency
Setting default value
Failed to read: session.numLayers
Setting default value
Failed to read: session.tabPadding
Setting default value
Failed to read: session.focusTabMinWidth
Setting default value
Failed to read: session.slitlistFile
Setting default value
Failed to read: session.groupFile
Setting default value
Failed to read: session.appsFile
Setting default value
Failed to read: session.tabsAttachArea
Setting default value
Failed to read: session.useMod1
Setting default value
Failed to read: session.screen0.imageDither
Setting default value
Failed to read: session.screen0.opaqueMove
Setting default value
Failed to read: session.screen0.sloppywindowgrouping
Setting default value
Failed to read: session.screen0.workspacewarping
Setting default value
Failed to read: session.screen0.desktopwheeling
Setting default value
Failed to read: session.screen0.autoRaise
Setting default value
Failed to read: session.screen0.clickRaises
Setting default value
Failed to read: session.screen0.decorateTransient
Setting default value
Failed to read: session.screen0.rootCommand
Setting default value
Failed to read: session.screen0.resizeMode
Setting default value
Failed to read: session.screen0.windowMenu
Setting default value
Failed to read: session.screen0.tabFocusModel
Setting default value
Failed to read: session.screen0.followModel
Setting default value
Failed to read: session.screen0.window.focus.alpha
Setting default value
Failed to read: session.screen0.window.unfocus.alpha
Setting default value
Failed to read: session.screen0.menu.alpha
Setting default value
Failed to read: session.screen0.menuDelay
Setting default value
Failed to read: session.screen0.menuDelayClose
Setting default value
Failed to read: session.screen0.menuMode
Setting default value
Failed to read: session.screen0.overlay.lineWidth
Setting default value
Failed to read: session.screen0.overlay.lineStyle
Setting default value
Failed to read: session.screen0.overlay.joinStyle
Setting default value
Failed to read: session.screen0.overlay.capStyle
Setting default value
Failed to read: session.screen0.windowScrollAction
Setting default value
Failed to read: session.screen0.windowScrollReverse
Setting default value
Failed to read: session.screen0.slit.maxOver
Setting default value
Failed to read: session.screen0.slit.alpha
Setting default value
Failed to read: session.screen0.slit.onhead
Setting default value
Failed to read: session.screen0.slit.layer
Setting default value
Failed to read: session.screen0.toolbar.maxOver
Setting default value
Failed to read: session.screen0.toolbar.visible
Setting default value
Failed to read: session.screen0.toolbar.alpha
Setting default value
Failed to read: session.screen0.toolbar.layer
Setting default value
Failed to read: session.screen0.toolbar.onhead
Setting default value
Failed to read: session.screen0.toolbar.height
Setting default value
Failed to read: session.screen0.toolbar.tools
Setting default value
Failed to read: session.screen0.iconbar.mode
Setting default value
Failed to read: session.screen0.iconbar.deiconifyMode
Setting default value
Failed to read: session.screen0.iconbar.wheelMode
Setting default value
Failed to read: session.screen0.iconbar.alignment
Setting default value
Failed to read: session.screen0.iconbar.iconWidth
Setting default value
Failed to read: session.screen0.iconbar.iconTextPadding
Setting default value
Failed to read: session.screen0.iconbar.usePixmap
Setting default value
waiting for X server to shut down X connection to :2.0 broken (explicit kill or server shutdown).
|
Was könnte es den noch sein? Jemand noch eine Idee?
Frage:
Das eigenartige ist, das ich auf der Konsole (verbunden auf entfernen PC) z.b. firefox-bin ausführen kann. Der X-Server biegt das Program um zeigst es mir unter der aktuell laufenden Maschine an. Allerdings erhalte ich auch hier eine Fehlermeldung, aber das Fenster von firefox wird dargestellt:
| Code: |
firefox-bin
X Error of failed request: BadAtom (invalid Atom parameter)
Major opcode of failed request: 20 (X_GetProperty)
Atom id in failed request: 0x19e
Serial number of failed request: 457
Current serial number in output stream: 457
Unable to connect to X server
(firefox-bin:14516): Gdk-WARNING **: gdk_property_get(): length value has wrapped in calculation (did you pass G_MAXLONG?)
|
Nach dieser Meldung wird firefox gestartet.
Aber wie kann ich eine komplette XSession auf meinen lokalen Rechner ziehen. Ich dachte das müsste, wie auch schon oben erwähnt durch das einloggen auf der entfernten Konsole via SSH (option -X) und anschließendem ausführen des Befehls startx -- :2.
Ist das etwa garnicht möglich?
_________________
Gentoo Linux Stage1 / Kernel 2.6.18
AMD Athlon64 3500+ on Asus A8N-E / 1024 MB DDR-RAM / ATI X700 PCIe
Take LINUX and forget Blue Screens |
|
| Back to top |
|
|
cng
Guru
Joined: 25 Feb 2004
Posts: 332
Location: Appenzell
|
| Posted: Fri Jan 27, 2006 8:53 pm Post subject: |
|
|
hmm. der lädt immer noch das xkb. ich weiss nicht genau, wo man das überall angeben kann. vieleicht irgend ein
modul oder so. hast du die xorgconf neu generiert, oder editiert? vieleicht müsste man mal die windoof- methode
anwenden init 6 
und was soll das??
| Quote: | Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown. |
dann kommt noch ein teil mit der nvidia, da weiss ich aber nicht weiter (habe keine nvidia)
hier bekommst du noch etwas info wegen dem grafischen login via netz => http://www.linux-fuer-alle.de/doc_show.php?docid=251
firefoxfehler ???
gruss
michael
_________________
Gentoo-Community - Your family
##################### |
|
| Back to top |
|
|
benjamin200
Veteran
Joined: 01 Feb 2004
Posts: 1426
Location: DE Munich
|
| Posted: Sat Jan 28, 2006 5:11 pm Post subject: |
|
|
| Quote: |
hmm. der lädt immer noch das xkb. ich weiss nicht genau, wo man das überall angeben kann
|
ich habs ja auch nicht deaktiviert, sondern auf beiden Seiten aktiviert 
ist mein vorhaben überhaupt möglich oder kann man nur einzelne Programme vom X-Server (entfernt) auf den Client (lokal) laden. Ziel wäre eine komplette XSession z.B. mit KDE oder fluxbox
_________________
Gentoo Linux Stage1 / Kernel 2.6.18
AMD Athlon64 3500+ on Asus A8N-E / 1024 MB DDR-RAM / ATI X700 PCIe
Take LINUX and forget Blue Screens |
|
| Back to top |
|
|
benjamin200
Veteran
Joined: 01 Feb 2004
Posts: 1426
Location: DE Munich
|
| Posted: Sun Jan 29, 2006 4:23 pm Post subject: |
|
|
BUMP
Wer kann mir diese Frage beantworten:
| Quote: |
ist mein vorhaben überhaupt möglich oder kann man nur einzelne Programme vom X-Server (entfernt) auf den Client (lokal) laden. Ziel wäre eine komplette XSession z.B. mit KDE oder fluxbox
|
_________________
Gentoo Linux Stage1 / Kernel 2.6.18
AMD Athlon64 3500+ on Asus A8N-E / 1024 MB DDR-RAM / ATI X700 PCIe
Take LINUX and forget Blue Screens |
|
| Back to top |
|
|
cng
Guru
Joined: 25 Feb 2004
Posts: 332
Location: Appenzell
|
| Posted: Mon Jan 30, 2006 7:52 am Post subject: |
|
|
 das hab ich noch nicht probiert. ich muss nun passen 
falls ich ein wenig logisch denken kann, würde ich aber auf ja tippen 
_________________
Gentoo-Community - Your family
##################### |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
