| View previous topic :: View next topic |
| Author |
Message |
fledah
n00b
Joined: 18 Aug 2005
Posts: 19
|
 Posted: Sun Jan 29, 2006 2:27 pm Post subject: DVD-Burner doesn't work well |
 |
|
Hello,
Ive got some problems with my NEC-DVD-Burner :
First of all when i bough my Dell Inspiron 9300-Laptop the DVD burner wasn't recognized by Gentoo Linux , i have to edit some kernel source and my Grub.CONF
as you can see in that thread https://forums.gentoo.org/viewtopic-t-371583-highlight-fledah.html
Finally the DVD-burner was supported and I'm able to mount and play DVD with DMA suport, but now I would like to burn some DVD and when I start burning process with GnomeBaker or NeroLinux (I bougth a License ) the empty DVD inserted to record the DATA is not detected  and the DVD driver seems to crash (I can't mount any disc and I must reboot.
Sometimes when I reboot about 15 times the DVD-R is detected and i'm able to burn.
Anyone have that kind of problem with this laptops ? ( my previous problems come from that my DVD-Recorder is detected as a PATA Device and Linux's support for PATA doesn't work very well )
sorry for english mistakes I'M french. |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54831
Location: 56N 3W
|
| Posted: Sun Jan 29, 2006 2:44 pm Post subject: |
|
|
fledah,
There is really only one program for burning in linux - cdrecord. Its a command line program.
All the pretty graphics burning programs call cdrecord to do the work.
There are lots of dire warnings about PATA writing in the burning apllications. They date from a time when SCSI emulation was the only way.
The warnings should be ignored - both SCSI emulation and direct PATA writing work well.
I would reccomend you use PATA writing, since SCSI emulation may be removed one day.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
fledah
n00b
Joined: 18 Aug 2005
Posts: 19
|
| Posted: Sun Jan 29, 2006 4:15 pm Post subject: |
|
|
thank you for your answr but i haven't enable SCSI Emulation just for fun, The only way tht i found to activate DMA Transfert on my laptop is emulating a SCSI Drive if could have a full native PATA support with DMA transfert i'll do it for sure but I can't.
And I'm almost sure that Nero is the onlyone software under linux that don't use CDRecord engine but it's own engine.
on top of tht if i remove the SCSI cdrom support my DVDburner is detected but no device is ascociated |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54831
Location: 56N 3W
|
| Posted: Sun Jan 29, 2006 6:15 pm Post subject: |
|
|
fledah,
You are probably right about Nero using its own burning engine - it was ported from Windows after all.
What does lspci show for your chipset, please post it all ?
What does dmesg show for your DVD burner ?
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
fledah
n00b
Joined: 18 Aug 2005
Posts: 19
|
| Posted: Sun Jan 29, 2006 10:17 pm Post subject: |
|
|
dmesg output :
| Code: | ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
ata1: dev 0 cfg 49:2f00 82:7c6b 83:5b08 84:4003 85:7c69 86:1a08 87:4003 88:203f
ata1: dev 0 ATA, max UDMA/100, 78140160 sectors:
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
Vendor: ATA Model: TOSHIBA MK4026GA Rev: PA10
Type: Direct-Access ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
ata2: dev 0 cfg 49:0b00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
Vendor: _NEC Model: DVD+-RW ND-6650A Rev: 102C
Type: CD-ROM ANSI SCSI revision: 05
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 5
ACPI: PCI Interrupt 0000:03:01.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
|
LSPCI output :
| Code: | 0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. Mobile Memory Controller Hub PCI Express Port (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1e.3 Modem: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FBM (ICH6M) SATA Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV41.8 (rev a2)
0000:03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
0000:03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
0000:03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
0000:03:01.2 Class 0805: Ricoh Co Ltd: Unknown device 0822 (rev 17)
0000:03:03.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05)
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
