| View previous topic :: View next topic |
| Author |
Message |
otaku
Guru
Joined: 16 Dec 2004
Posts: 428
Location: Rho (MI)
|
 Posted: Tue Jan 31, 2006 12:09 am Post subject: vesafb+nvidia gioie e dolori [WORKAROUND] |
 |
|
Premetto che ho da sempre una scheda NVIDIA che ha sempre funzionato alla perfezione...
ora da qualche settimana il frame buffer impazzisce dopo che viene avviato xorg...
al posto del testo visualizzo rettangolini di vario colore assolutamente sparsi... xorg invece continua a lavorare alla grande...
nel caso potrei postare il link ad una foto del monitor con framebuffer impazzito;
ps. non passando la variabile vga all'avvio del kernel va tutto alla perfezione e riesco a vedere i terminali anche dopo aver avviato xorg... questo mi fa pensare a qualche problema con il framebuffer...
ora un po' di copy and paste...
| Code: | Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/freefont/"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Sony 200ES"
HorizSync 30.0 - 70.0
VertRefresh 50-120
Option "DPMS" "on"
EndSection
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
Driver "vga"
EndSection
Section "Device"
Identifier "GeForce FX 5700VE"
Driver "nvidia"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
Section "Screen"
Identifier "Screen 1"
Device "GeForce FX 5700VE"
Monitor "Sony 200ES"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection |
| Code: | Bootdata ok (command line is root=/dev/hda3 vga=794)
Linux version 2.6.15-gentoo-r1 (root@bebop) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 PREEMPT Mon Jan 30 23:25:35 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
BIOS-e820: 000000003ffc0000 - 000000003ffd0000 (ACPI data)
BIOS-e820: 000000003ffd0000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa080
ACPI: XSDT (v001 A M I OEMXSDT 0x08000416 MSFT 0x00000097) @ 0x000000003ffc0100
ACPI: FADT (v003 A M I OEMFACP 0x08000416 MSFT 0x00000097) @ 0x000000003ffc0290
ACPI: MADT (v001 A M I OEMAPIC 0x08000416 MSFT 0x00000097) @ 0x000000003ffc0390
ACPI: OEMB (v001 A M I OEMBIOS 0x08000416 MSFT 0x00000097) @ 0x000000003ffd0040
ACPI: DSDT (v001 A0128 A0128003 0x00000003 INTL 0x02002026) @ 0x0000000000000000
On node 0 totalpages: 257320
DMA zone: 2863 pages, LIFO batch:0
DMA32 zone: 254457 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
Nvidia board detected. Ignoring ACPI timer override.
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda3 vga=794
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 2009.790 MHz processor.
time.c: Using PIT/TSC based timekeeping.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 1027492k/1048320k available (2494k kernel code, 20344k reserved, 1077k data, 180k init)
Calibrating delay using timer specific routine.. 4022.22 BogoMIPS (lpj=2011114)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
Using local APIC timer interrupts.
Detected 12.561 MHz APIC timer.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: Power Resource [ISAV] (on)
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *3
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *10
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: fc900000-fe9fffff
PREFETCH window: d8800000-f87fffff
PCI: Bridge: 0000:00:0e.0
IO window: d000-dfff
MEM window: fea00000-feafffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:0e.0 to 64
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000080000, using 5120k, total 262144k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: Mode is not VGA compatible
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
gameport: EMU10K1 is pci0000:02:0a.1/gameport0, io 0xdc00, speed 1195kHz
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
Floppy drive(s): fd0 is 1.44M
Unable to handle kernel NULL pointer dereference at 00000000000007b8 RIP:
<ffffffff8028b2fd>{input_register_device+13}
PGD 0
Oops: 0000 [1] PREEMPT
CPU 0
Modules linked in:
Pid: 765, comm: kgameportd Not tainted 2.6.15-gentoo-r1 #1
RIP: 0010:[<ffffffff8028b2fd>] <ffffffff8028b2fd>{input_register_device+13}
RSP: 0000:ffff81003f865c58 EFLAGS: 00010292
RAX: 0000000000000016 RBX: ffff81003fdf0e68 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffff81003fdf0e00
R13: 0000000000000001 R14: 0000000000000000 R15: ffff81003fd94000
FS: 0000000000000000(0000) GS:ffffffff804fc800(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 00000000000007b8 CR3: 0000000000101000 CR4: 00000000000006e0
Process kgameportd (pid: 765, threadinfo ffff81003f864000, task ffff81003fd5ce60)
Stack: ffff81003fc9eee0 ffffffff80223d2d ffff81003fc9eed0 ffff81003fdf0e68
000000000000000a ffff81003fdf0e00 0000000000000001 ffffffff80295f6d
0000000000000000 ffff81003f865ca0
Call Trace:<ffffffff80223d2d>{kobject_init+45} <ffffffff80295f6d>{sw_connect+2045}
<ffffffff802891d9>{gameport_driver_probe+25} <ffffffff80297dff>{driver_probe_device+79}
<ffffffff80297f00>{__driver_attach+0} <ffffffff80297f3f>{__driver_attach+63}
<ffffffff80297f00>{__driver_attach+0} <ffffffff80297339>{bus_for_each_dev+73}
<ffffffff80297888>{bus_add_driver+136} <ffffffff8029840a>{driver_register+58}
<ffffffff8028960a>{gameport_thread+618} <ffffffff80145680>{autoremove_wake_function+0}
<ffffffff80145680>{autoremove_wake_function+0} <ffffffff802893a0>{gameport_thread+0}
<ffffffff80145000>{keventd_create_kthread+0} <ffffffff80144fbd>{kthread+221}
<ffffffff8010e626>{child_rip+8} <ffffffff80145000>{keventd_create_kthread+0}
<ffffffff80144ee0>{kthread+0} <ffffffff8010e61e>{child_rip+0}
Code: 8b b7 b8 07 00 00 85 f6 75 2a 48 8b 77 08 48 c7 c0 2f 11 3a
RIP <ffffffff8028b2fd>{input_register_device+13} RSP <ffff81003f865c58>
CR2: 00000000000007b8
<6>FDC 0 is a post-1991 82077
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48.
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22
GSI 16 sharing vector 0xB1 and IRQ 16
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LKLN] -> GSI 22 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:05.0 to 64
logips2pp: Detected unknown logitech mouse model 79
input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:05.0
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
GSI 17 sharing vector 0xB9 and IRQ 17
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 17
eth1: RealTek RTL8139 at 0xffffc20000006c00, 00:50:ba:b4:9c:66, IRQ 17
eth1: Identified 8139 chip type 'RTL-8139C'
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
NFORCE3-250: chipset revision 162
Losing some ticks... checking if CPU frequency changed.
NFORCE3-250: not 100% native mode: will probe irqs later
NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: Maxtor 6B120P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG CDRW/DVD SM-352B, ATAPI CD/DVD-ROM drive
hdd: QUANTUM FIREBALLP AS30.0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdb: max request size: 128KiB
hdb: 240121728 sectors (122942 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(133)
hdb: cache flushes supported
hdb: hdb1 hdb2
hdd: max request size: 128KiB
hdd: 58633344 sectors (30020 MB) w/1902KiB Cache, CHS=58168/16/63, UDMA(33)
hdd: cache flushes not supported
hdd: hdd1
hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
GSI 18 sharing vector 0xC1 and IRQ 18
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 18, io mem 0xfebffc00
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
GSI 19 sharing vector 0xC9 and IRQ 19
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 19, io mem 0xfebfd000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 22 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 16, io mem 0xfebfe000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (4095 buckets, 32760 max) - 288 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
cpu_init done, current fid 0xc, vid 0x0
powernow-k8: ph2 null fid transition 0xc
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 180k freed
kjournald starting. Commit interval 5 seconds
cdrom: open failed.
Adding 1551304k swap on /dev/hda2. Priority:-1 extents:1 across:1551304k
EXT3 FS on hda3, internal journal
cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: dm-6: found reiserfs format "3.6" with standard journal
ReiserFS: dm-6: using ordered data mode
ReiserFS: dm-6: journal params: device dm-6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-6: checking transaction log (dm-6)
ReiserFS: dm-6: Using r5 hash to sort names
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
ReiserFS: dm-4: using ordered data mode
ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-4: checking transaction log (dm-4)
ReiserFS: dm-4: Using r5 hash to sort names
eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 18
GSI 20 sharing vector 0xD1 and IRQ 20
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKE] -> GSI 18 (level, low) -> IRQ 20
NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:58:07 PST 2005 |
_________________
Ventiquattr'ore al giorno in preda a una follia contorta...
Last edited by otaku on Tue Jan 31, 2006 9:31 pm; edited 1 time in total |
|
| Back to top |
|
 |
cloc3
Advocate
Joined: 13 Jan 2004
Posts: 4810
Location: http://www.gentoo-users.org/user/cloc3/
|
| Posted: Tue Jan 31, 2006 6:15 am Post subject: Re: vesafb+nvidia gioie e dolori |
|
|
| otaku wrote: | da qualche settimana il frame buffer impazzisce dopo che viene avviato xorg...
al posto del testo visualizzo rettangolini di vario colore assolutamente sparsi... xorg invece continua a lavorare alla grande...
|
Sono fenomeni che accadevano al mio portatile, prima che il supporto dei driver nvidia fosse completo. A te invece, si presenta un caso di regressione.
Comunque, allora caricavo il modulo nvidia con un paio di opzioni particolari, sugggerite direttamente dalla documentazione della casa madre.
Per attivare le opzioni, mettevo questa linea in /etc/modules.d/nvidia e poi davo modules-update:
| Code: |
options NVreg_SoftEDIDs=0 NVreg_Mobile=2
|
_________________
vu vu vu
gentù
mi piaci tu |
|
| Back to top |
|
|
.:deadhead:.
Advocate
Joined: 25 Nov 2003
Posts: 2963
Location: Milano, Italy
|
|
| Back to top |
|
|
cloc3
Advocate
Joined: 13 Jan 2004
Posts: 4810
Location: http://www.gentoo-users.org/user/cloc3/
|
| Posted: Tue Jan 31, 2006 10:32 am Post subject: |
|
|
Complimenti per la precisione dei link.
Aggiornerò i miei bookmarks.
[insinuazione]
Però questa pignoleria muscolare mi sembra un po' da paura del ritorno di fedeliallalinea.
L'uomo dai link inesorabili.
[/insinuazione]
_________________
vu vu vu
gentù
mi piaci tu |
|
| Back to top |
|
|
otaku
Guru
Joined: 16 Dec 2004
Posts: 428
Location: Rho (MI)
|
| Posted: Tue Jan 31, 2006 1:23 pm Post subject: |
|
|
Girando sui forum di http://www.nvnews.net/ ho notato che il mio non è un caso isolato, sembra che per risolvere basti aggiungere
| Code: | Option "ConnectedMonitor" "CRT"
Option "IgnoreDisplayDevices" "TV" |
per ovviare a questo problema... sta sera quando torno a casa saprò dirvi qualcosa in più...
@.:deadhead:. : grazie per i link ci sto giusto dando un occhiata 
EDIT: sembra vhe basti effettivamente impostare queste due opzioni per mettere tutto a posto... in caso scoprissi qualcosa di nuovo uppo il post
_________________
Ventiquattr'ore al giorno in preda a una follia contorta... |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Forum italiano (Italian)
