| View previous topic :: View next topic |
| Author |
Message |
power83
l33t
Joined: 28 Nov 2004
Posts: 638
|
 Posted: Mon Feb 06, 2006 11:56 am Post subject: lm_sensors...help |
 |
|
ciao, volevo sapere come installare e soprattutto configuare il tutto, ho guardato sul wiki questo http://gentoo-wiki.com/HARDWARE_Sensors
ma lo trovo molto poco chiaro, oltre al fatto che fa emergere i2c che serve solo x i kernels 2.4.x....
ps: sensors-detect mi dice: "No i2c device files found. Use prog/mkdev/mkdev.sh to create them.
ma sto script io nn l'ho da nessuna parte....forse una patch di Gentoo mancante????  |
|
| Back to top |
|
 |
gutter
Bodhisattva
Joined: 13 Mar 2004
Posts: 7162
Location: Aarau, Aargau, Switzerland
|
| Posted: Mon Feb 06, 2006 12:02 pm Post subject: |
|
|
Hai compilato i moduli e li hai caricati correttamente?
_________________
Registered as User #281564 and Machines #163761 |
|
| Back to top |
|
|
power83
l33t
Joined: 28 Nov 2004
Posts: 638
|
| Posted: Mon Feb 06, 2006 8:50 pm Post subject: |
|
|
quali moduli?
Io ho compilato i2c e i moduli i2c-i801 ed i2c-i810, nn riesco a capire bene che sensori ho io nemmeno con lspci -v |
|
| Back to top |
|
|
x-dd
n00b
Joined: 19 Aug 2005
Posts: 68
|
| Posted: Mon Feb 06, 2006 8:54 pm Post subject: |
|
|
Prima di sensors-detect prova a caricare i2c-dev
|
|
| Back to top |
|
|
power83
l33t
Joined: 28 Nov 2004
Posts: 638
|
| Posted: Mon Feb 06, 2006 10:07 pm Post subject: |
|
|
ti amo, ora posso provare a configurare il tutto, maledette ventole che suonano come casse acustiche...
grazie.
ps: prima di mettere risolto vedo d far funzionare il tutto. |
|
| Back to top |
|
|
ErniBrown
Apprentice
Joined: 19 Jan 2005
Posts: 276
Location: Seconda stella a destra e poi dritto fino al mattino...
|
| Posted: Tue Feb 07, 2006 2:30 pm Post subject: |
|
|
piccolo suggerimento: nel mio caso ho dovuto avviare a mano i moduli e poi lanciare sensors_detect, da lì in poi tutto perfetto. Lanciando solo i moduli non configuri il file /etc/confd/sensor.rc, per cui dopo ogni riavvio devi ricaricarli.
_________________
There are 10 kind of people:
those who understand binaries and
those who don't. |
|
| Back to top |
|
|
osar_sabin
n00b
Joined: 09 Mar 2006
Posts: 69
|
| Posted: Wed Mar 22, 2006 3:18 pm Post subject: |
|
|
| raga, io non sno riuscito a risolvere...avevo letto che c'era una incompatibilità con amd64...è vero???Puo essere questo il mio problema? |
|
| Back to top |
|
|
power83
l33t
Joined: 28 Nov 2004
Posts: 638
|
| Posted: Thu Mar 23, 2006 2:31 pm Post subject: |
|
|
| ErniBrown wrote: | | piccolo suggerimento: nel mio caso ho dovuto avviare a mano i moduli e poi lanciare sensors_detect, da lì in poi tutto perfetto. Lanciando solo i moduli non configuri il file /etc/confd/sensor.rc, per cui dopo ogni riavvio devi ricaricarli. |
io ho solo /etc/conf.d/sensord |
|
| Back to top |
|
|
tizio
Guru
Joined: 22 Mar 2005
Posts: 365
|
| Posted: Fri Mar 24, 2006 3:41 pm Post subject: |
|
|
scusate non riesco a configurare lm_sensors
ho seguito le guide ma sensors mi da il seguente ouput:
root:/# sensors
Can't access procfs/sysfs file
Unable to find i2c bus information;
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!
For older kernels, make sure you have done 'modprobe i2c-proc'!
mentre seguendo tutto sensors-detect alla fine ottengo:
Sorry, no chips were detected.
Either your sensors are not supported, or they are
connected to an I2C bus adapter that we do not support.
See doc/FAQ, doc/lm_sensors-FAQ.html, or
http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/doc/lm_sensors-FAQ.html
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, see
http://secure.netroedge.com/~lm78/newdrivers.html for driver status.
questo è il mio lspci:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 51)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
00:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
00:09.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
00:09.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
mentre il mio fstab:
/dev/hdc1 /data xfs noatime 0 0
/dev/cdrom /mnt/cdrom iso9660 noauto,ro 0 0
/dev/sda1 /mnt/remov ntfs noauto,defaults,umask=022,ro 0 0
/dev/sda5 /mnt/supp/ vfat noauto,user 0 0
proc /proc proc defaults 0 0
/dev/shm /dev/shm tmpfs defaults 0 0
grazie a tutti |
|
| Back to top |
|
|
ginetto
n00b
Joined: 20 Jan 2005
Posts: 65
Location: Italia
|
| Posted: Sun Mar 26, 2006 8:33 pm Post subject: |
|
|
| tizio wrote: | scusate non riesco a configurare lm_sensors
ho seguito le guide ma sensors mi da il seguente ouput:
root:/# sensors
Can't access procfs/sysfs file
Unable to find i2c bus information;
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!
For older kernels, make sure you have done 'modprobe i2c-proc'!
mentre seguendo tutto sensors-detect alla fine ottengo:
Sorry, no chips were detected.
Either your sensors are not supported, or they are
connected to an I2C bus adapter that we do not support.
See doc/FAQ, doc/lm_sensors-FAQ.html, or
http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/doc/lm_sensors-FAQ.html
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, see
http://secure.netroedge.com/~lm78/newdrivers.html for driver status.
questo è il mio lspci:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 51)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
00:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
00:09.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
00:09.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
mentre il mio fstab:
/dev/hdc1 /data xfs noatime 0 0
/dev/cdrom /mnt/cdrom iso9660 noauto,ro 0 0
/dev/sda1 /mnt/remov ntfs noauto,defaults,umask=022,ro 0 0
/dev/sda5 /mnt/supp/ vfat noauto,user 0 0
proc /proc proc defaults 0 0
/dev/shm /dev/shm tmpfs defaults 0 0
grazie a tutti |
Guarda se nel kernel hai abilitato il supporto per I2C
| Code: | Device Drivers --->
I2C support --->
<M> I2C support
<M> I2C device interface
I2C Hardware Bus support --->
<M> Choose the appropriate module(s) for your hardware here
I2C Hardware Sensors Chip support --->
<M> Choose the appropriate module(s) for your sensors here |
Ho avuto lo stesso problema e se non ricordo male l'ho risolto così. In ogni caso dai un'occhiata a questa Guida e a Questa 
Ciao |
|
| Back to top |
|
|
tizio
Guru
Joined: 22 Mar 2005
Posts: 365
|
| Posted: Tue Mar 28, 2006 3:27 pm Post subject: |
|
|
si ho seguito le guide...
il kernel è già configurato,
mi carica anche correttamente i moduli i2c-dev e i2c-sis96x
grazie |
|
| Back to top |
|
|
Luca89
Advocate
Joined: 27 Apr 2005
Posts: 2107
Location: Agrigento (Italy)
|
| Posted: Tue Mar 28, 2006 5:53 pm Post subject: |
|
|
Prova a mettere ancheil modulo it87.
_________________
Running Fast! |
|
| Back to top |
|
|
tizio
Guru
Joined: 22 Mar 2005
Posts: 365
|
| Posted: Wed Mar 29, 2006 11:04 pm Post subject: |
|
|
root:/home/tizio# modprobe it87
FATAL: Module it97 not found.
devo emergere qualcosa? nel kernel (2.6.15-gentoo-r1) non ne trovo traccia..
grazie ancora |
|
| Back to top |
|
|
Luca89
Advocate
Joined: 27 Apr 2005
Posts: 2107
Location: Agrigento (Italy)
|
| Posted: Thu Mar 30, 2006 7:49 am Post subject: |
|
|
Evidentemente non è compilato, vai nella configurazione del kernel sotto Hardware Monitoring.
_________________
Running Fast! |
|
| Back to top |
|
|
tizio
Guru
Joined: 22 Mar 2005
Posts: 365
|
| Posted: Thu Mar 30, 2006 4:05 pm Post subject: |
|
|
trovato, configurato, ricompilato, caricato...
risultato invariato  |
|
| Back to top |
|
|
tizio
Guru
Joined: 22 Mar 2005
Posts: 365
|
| Posted: Wed Nov 01, 2006 2:55 am Post subject: |
|
|
scusate l'up di un vecchio post
consultando il wiki devices di lm_sensors sembrerebbe che il driver giusto per il mio chipset sia i2c-sis645... purtroppo nel kernel non c'è e di conseguenza provandolo a caricare ottengo solo:
| Code: |
FATAL: Module i2c_sis645 not found.
|
_________________
ci son 10 tipi di persone al mondo..
chi capisce il binario e chi no |
|
| Back to top |
|
|
|
Forum italiano (Italian)
