| View previous topic :: View next topic |
| Author |
Message |
mrudzki
n00b
Joined: 14 Feb 2006
Posts: 20
Location: Poland
|
 Posted: Tue Feb 21, 2006 9:11 am Post subject: [SOLVED] KDE 3.4, problemy z dzwiekiem i ati |
 |
|
Witam wszystkich, mam maly problem z moim kde, po dlugich bataliach z gentoo udalo mi sie uruchomich kde
emerge kdebase-startx
emerge kicker kmenuedit
emerge kate kontrol knetattach.... itp
1. nie moge uruchomic dzwieku posiadam plyte Abit NF7-s (soundstorm), w kernelu ustawione mam wsparcie dla oss, przeczytalem na forum ze powinno chodzic 
2. nie jestem pewien czy moja karta grafiki dobrze dziala po wlaczeniu w kde Info center --> opengl, wiesza sie cale infocenter (ATi 8500 LE 64MB Hercules)
3. a takze mam problem w momecie kiedy chce restartowac kompa, wylogowywuje znika wszystko czarny ekran i nic nie moge zrobic nawet przejsc do konsoli (ALT+F1, F2)
jesli chodzi o ATi to robilem tak jak pisza w handbook'u do gentoo,
kernel 2.6.15-gentoo-r1
ps. tylko prosze o instrukcje krok po kroku, dzieki
oto co mam w kernelu 
| Code: | <*> Soundcard support
Advanced Linux Sound Architecture -->
<*> Advanced Linux Sound Architecture
<*> Sequencer support
<*> OSS mixer api
<*> OSS PCM ....
[*] OSS mixer api
PCI Devices -->
<*>Intel/SIS/nvidia/AMD/Ali AC97 Controller
|
dmesg
| Code: |
hecking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4014.87 BogoMIPS (lpj=8029747)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: AMD Athlon(tm) stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 1c20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=2
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: nForce2 C1 Halt Disconnect fixup
Boot video device is 0000:02:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
pnp: 00:00: ioport range 0x4400-0x447f has been reserved
pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
pnp: 00:00: ioport range 0x4200-0x427f has been reserved
pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
pnp: 00:01: ioport range 0x5000-0x503f has been reserved
pnp: 00:01: ioport range 0x5100-0x513f has been reserved
PCI: Bridge: 0000:00:08.0
IO window: a000-bfff
MEM window: e2000000-e3ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: c000-cfff
MEM window: e0000000-e1ffffff
PREFETCH window: d8000000-dfffffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1140514783.176:1): initialized
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (49 C)
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 128M @ 0xd0000000
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.0 to 64
input: AT Translated Set 2 keyboard as /class/input/input0
eth0: forcedeth.c: subsystem: 0147b:1c00 bound to 0000:00:04.0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: Maxtor 6Y080P0, ATA DISK drive
hdb: ST340014A, ATA DISK drive
Probing IDE interface ide1...
hdc: LITE-ON CD-RW SOHR-5238S, ATAPI CD/DVD-ROM drive
hdd: MATSHITADVD-ROM SR-8588, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
hdb: max request size: 1024KiB
hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63
hdb: cache flushes supported
hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 >
hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 123X DVD-ROM drive, 256kB Cache
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LFIR] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e4084000-e40847ff] Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 10, io mem 0xe4086000
ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 5, io mem 0xe4080000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 12 (level, low) -> IRQ 12
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 12, io mem 0xe4083000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usb 2-1: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 12
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 12 (level, low) -> IRQ 12
PCI: Setting latency timer of device 0000:00:06.0 to 64
ohci1394: fw-host0: SelfID received outside of bus reset sequence
intel8x0_measure_ac97_clock: measured 114278 usecs
intel8x0: clocking to 48000
ALSA device list:
#0: NVidia nForce2 with ALC650F at 0xe4081000, irq 12
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (6143 buckets, 49144 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000000508de8a6a2]
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S5)
ReiserFS: hdb6: found reiserfs format "3.6" with standard journal
ReiserFS: hdb6: using ordered data mode
ReiserFS: hdb6: journal params: device hdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb6: checking transaction log (hdb6)
ReiserFS: hdb6: journal-1153: found in header: first_unflushed_offset 3241, last_flushed_trans_id 20492
ReiserFS: hdb6: journal-1006: found valid transaction start offset 103079218345, len 20493 id -272438892
ReiserFS: hdb6: journal-1206: Starting replay from offset 88016764800169, trans_id 1
ReiserFS: hdb6: journal-1037: journal_read_transaction, offset 103079218345, len 83 mount_id -1068883744
ReiserFS: hdb6: journal-1095: setting journal start to offset 3267
ReiserFS: hdb6: journal-1037: journal_read_transaction, offset 90194316483, len 83 mount_id 1018
ReiserFS: hdb6: journal-1095: setting journal start to offset 3290
ReiserFS: hdb6: journal-1037: journal_read_transaction, offset 98784251098, len 83 mount_id 1018
ReiserFS: hdb6: journal-1095: setting journal start to offset 3315
ReiserFS: hdb6: journal-1037: journal_read_transaction, offset 124554054899, len 83 mount_id 1018
ReiserFS: hdb6: journal-1095: setting journal start to offset 3346
ReiserFS: hdb6: journal-1037: journal_read_transaction, offset 55834578194, len 83 mount_id 1018
ReiserFS: hdb6: journal-1095: setting journal start to offset 3361
ReiserFS: hdb6: journal-1037: journal_read_transaction, offset 38654709025, len 83 mount_id 1018
ReiserFS: hdb6: journal-1095: setting journal start to offset 3372
ReiserFS: hdb6: journal-1037: journal_read_transaction, offset 42949676332, len 83 mount_id 1018
ReiserFS: hdb6: journal-1095: setting journal start to offset 3384
ReiserFS: hdb6: journal-1037: journal_read_transaction, offset 103079218488, len 83 mount_id 1018
ReiserFS: hdb6: journal-1095: setting journal start to offset 3410
ReiserFS: hdb6: journal-1037: journal_read_transaction, offset 343597387090, len 0 mount_id 1018
ReiserFS: hdb6: journal-1146: journal_read_trans skipping because 0 is != newest_mount_id 83
ReiserFS: hdb6: journal-1299: Setting newest_mount_id to 84
ReiserFS: hdb6: replayed 8 transactions in 1 seconds
ReiserFS: hdb6: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 168k freed
Adding 995988k swap on /dev/hdb5. Priority:-1 extents:1 across:995988k
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 680 MBytes.
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
[fglrx] module loaded - fglrx 8.14.13 [Jun 8 2005] on minor 0
NTFS driver 2.1.25 [Flags: R/W DEBUG MODULE].
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
NFORCE2: port 0x01f0 already claimed by ide0
NFORCE2: port 0x0170 already claimed by ide1
NFORCE2: neither IDE port enabled (BIOS)
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] Kernel AGP support doesn't provide agplock functionality.
[fglrx] AGP detected, AgpState = 0x1f000207 (hardware caps of chipset)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
[fglrx] AGP enabled, AgpCommand = 0x1f000304 (selected caps)
Bad page state at free_hot_cold_page (in process 'X', page c15a9180)
flags:0x80000414 mapping:00000000 mapcount:0 count:0
Backtrace:
[<c013df80>] bad_page+0x80/0xc0
[<c013e7c1>] free_hot_cold_page+0x61/0x110
[<c0148cb4>] zap_pte_range+0x174/0x230
[<c0148e33>] unmap_page_range+0xc3/0x130
[<c0148f8b>] unmap_vmas+0xeb/0x1d0
[<c014d175>] unmap_region+0x95/0x120
[<c014d49c>] do_munmap+0x10c/0x150
[<c014d530>] sys_munmap+0x50/0x80
[<c0103201>] syscall_call+0x7/0xb
Trying to fix it up, but a reboot is needed
[fglrx] free AGP = 121909248
[fglrx] max AGP = 121909248
[fglrx] free LFB = 55570432
[fglrx] max LFB = 55570432
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 32768
|
_________________
AMD Athlon XP 2000+ (OC to 2400+)
1024 MB PC3200 DDR (OC to CL2.5)
Abit NF7-S (nforce2 400)
Gainward - nVidia G-Force TI 4600 128/128
---------------------------------------------------
Gentoo Linux, Kernel 2.6.16
Windows XP Pro
Last edited by mrudzki on Fri Feb 24, 2006 7:25 pm; edited 2 times in total |
|
| Back to top |
|
 |
ilny
Apprentice
Joined: 16 Nov 2005
Posts: 239
Location: [Poland] [Wlkp]
|
| Posted: Tue Feb 21, 2006 9:18 am Post subject: |
|
|
1.Ja tez mam soundstorma (opcje w kernelu mam takie same jak ty) tyle za na Abit A7N8x-e Deluxe i dziala wszystko ok (pomijajac ze nie umiem zrobic dzwieku na 5,1). Skonfigurowales sobie alse ? Chodzi o dzwieki kde czy ogolnie ?
ALSA ---> http://www.gentoo.org/doc/pl/alsa-guide.xml
2. sprawdz najpierw | Code: | | fglrxinfo, glxinfo | grep direct , glxgears |
wklej co pokazuje a najlepiej odpal gre
ATI ---> http://odin.prohosting.com/wedge01/gentoo-radeon-faq.html
Ps. i popraw to code bo sie czytac nie da
Ps2. czy problem naprawde dotyczy kde  temat wprowadza w blad
Pozdrawiam
_________________
Use!: [stage1/stage3 & minimal CD ] |
|
| Back to top |
|
|
argasek
Bodhisattva
Joined: 06 May 2004
Posts: 1121
Location: Sol [0,0], Poland, Kraków
|
| Posted: Tue Feb 21, 2006 12:03 pm Post subject: |
|
|
| Code: |
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
|
Primo, zdecyduj się na jeden AGP support:
- jeśli ten z kernela, to skompiluj go jako moduły (agpgart + odpowiedni dla Twojej płyty) i ustaw Option "UseInternalAGPGART" "no" w /etc/X11/xorg.conf
- jeśli wbudowany, dokładnie odwrotnie (odznacz moduły AGP przy kompilacji kernela całkowicie). (odradzam tą opcję - moduł dostarczany ze sterownikiem ATi jest co najmniej stary)
Secundo, sprawdź RAM programem memtest86 - powinien być na płycie instalacyjnej Gentoo (zrób przynajmniej 2 pełne przejścia).
Tertio, BIOS płyty aktualny? Jeśli nie - zaktualizuj.
_________________
RLU #137109 | http://soundcloud.com/argasek |
|
| Back to top |
|
|
mrudzki
n00b
Joined: 14 Feb 2006
Posts: 20
Location: Poland
|
| Posted: Wed Feb 22, 2006 9:37 am Post subject: |
|
|
ufff, udalo mi sie uruchomic wymazony dzwiek wystarczylo sterowniki alsy przekompilowac w jajku na moduly, potem emerge alsa-utils no i oczywiscie rc-update add alsasound i wszystko gra, dokladnie sie wczytalem w handbooka na www.gentoo.org, a co do ATi chodz ale nie wiem czy dokonca, w momecie kiedy wchodze w kde na control panel i w opcje opengl wiesza sie, oraz nie moge rozwiazac problemu z zawieszaniem sie kde, kiedy chce sie wylogowac lub wylaczyc kompa pomozcie, w ktorych logach to moze byc zapisane, dzieki za pomoc wszystkim
_________________
AMD Athlon XP 2000+ (OC to 2400+)
1024 MB PC3200 DDR (OC to CL2.5)
Abit NF7-S (nforce2 400)
Gainward - nVidia G-Force TI 4600 128/128
---------------------------------------------------
Gentoo Linux, Kernel 2.6.16
Windows XP Pro |
|
| Back to top |
|
|
ilny
Apprentice
Joined: 16 Nov 2005
Posts: 239
Location: [Poland] [Wlkp]
|
| Posted: Wed Feb 22, 2006 10:01 am Post subject: |
|
|
Ehh podalem ci 3 polecenia dotyczace ati, zebys wkeil ich wynik a ty nadal swoje Zreszta argasek zwrocil ci uwage na obsluge AGP... 
_________________
Use!: [stage1/stage3 & minimal CD ] |
|
| Back to top |
|
|
mrudzki
n00b
Joined: 14 Feb 2006
Posts: 20
Location: Poland
|
| Posted: Wed Feb 22, 2006 11:43 am Post subject: |
|
|
sorki, zapomnialem na smierc wkleic to oco prosiles
| Code: | glxinfo | grep direct
Direct rendering: Yes
glxgear
12044 frames in 0.5 second = 2408.800 FPS
(caly czas jest tak 2400 do 3000)
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 8500 DDR Generic
OpenGL version string: 1.3.1003 (X4.3.0-8.14.13)
|
PS. co do agp, w pliku xorg.conf wylaczylem obsluge AGP
| Code: |
...
"UseInternalAGPGART" "no"
...
|
Nieiwem czy tak ma byc ale kazde z powyzszych polecen nie dalo sie wylaczyc, poprosu migal kuesor i nic, musialem konsole wylaczac,
teraz wyruszam do pracy, jak wroce to moge podac jeszcze jakies logi, jak wczesniej wspomnialem nie moge wogole wylaczyc kde ani zresetowac, - poprostu sie wiesza, dzieki za cierpliwosc - pozdrawiam
_________________
AMD Athlon XP 2000+ (OC to 2400+)
1024 MB PC3200 DDR (OC to CL2.5)
Abit NF7-S (nforce2 400)
Gainward - nVidia G-Force TI 4600 128/128
---------------------------------------------------
Gentoo Linux, Kernel 2.6.16
Windows XP Pro |
|
| Back to top |
|
|
lukierek
n00b
Joined: 21 Feb 2006
Posts: 13
Location: /Poland/Kraków
|
| Posted: Wed Feb 22, 2006 1:27 pm Post subject: |
|
|
Witam
Prawdopodobnie jak odmaskujesz ati-drivers (te z ~x86) i je zaemergujesz będzie wszystko w porządku z reboot i halt. O ile się nie mylę jest bug w sterach których używasz powodujący, że jaja 2.6.15 się wywalają przy zamknięciu systemu.
pozdrawiam |
|
| Back to top |
|
|
andrzejk
Tux's lil' helper
Joined: 08 Jan 2006
Posts: 139
Location: Warsaw, Poland
|
| Posted: Wed Feb 22, 2006 3:41 pm Post subject: |
|
|
| Quote: | | Prawdopodobnie jak odmaskujesz ati-drivers (te z ~x86) i je zaemergujesz będzie wszystko w porządku z reboot i halt. O ile się nie mylę jest bug w sterach których używasz powodujący, że jaja 2.6.15 się wywalają przy zamknięciu systemu. |
Wątpię czy to pomoże do końca rozwiązać problem mam najnowsze stery i podobny problem przy wylogowaniu system potrafi sie zwiesić. Nie jest to bynajmniej problem KDE bo przy GNOMIE i i generalnie przełączaniu do konsoli dzieje się to samo. Nie pisałem na razie o tym na forum - bo nie miałem czasu przeszperać anglojęzycznych archiwów i zwisy nie zdarzają się tak często. Jedno co zauważyłem bo mam jeszcze stare jądro 2.6.14 tam nie następuje zwis nigdy ale czasami Xy się kładą przy wylogowaniu i nie wstają.
Moja konfiguracja to Xorg 7.0 + Ati-drivers-8.22.5 agpgart + agp i fglrx jako moduły ładowane podczas startu. Jądrą 2.6.15-nitro ale to samo było z 2.6.15-gentoo.
_________________
Dell XPS Gentoo 3.12.2 GCC 4.8.2 KDE 4.11 |
|
| Back to top |
|
|
ilny
Apprentice
Joined: 16 Nov 2005
Posts: 239
Location: [Poland] [Wlkp]
|
| Posted: Wed Feb 22, 2006 3:49 pm Post subject: |
|
|
Ja mam fluxboxa, ati-drivers 8.22.5 fglrx, agpgart jako moduly, xorg 6.8.2-r6, jajko 2.6.15-gentoo-r5 i nie zauwazylem nic podobnego wszystko chodzi jak nalezy Jak uzywalem Kde 3.5 tez nie pamietam zeby byly jakies problemy, pokazcie moze swoje .
_________________
Use!: [stage1/stage3 & minimal CD ] |
|
| Back to top |
|
|
lukierek
n00b
Joined: 21 Feb 2006
Posts: 13
Location: /Poland/Kraków
|
| Posted: Thu Feb 23, 2006 8:16 am Post subject: |
|
|
A próbowałeś zamknąć system z konsoli przy uruchomionych X'ach?
Jest szansa, że wtedy zobaczysz komunikat błędu, który powoduje crash'a
pozdrawiam |
|
| Back to top |
|
|
andrzejk
Tux's lil' helper
Joined: 08 Jan 2006
Posts: 139
Location: Warsaw, Poland
|
| Posted: Thu Feb 23, 2006 9:19 am Post subject: |
|
|
Oto moje emerge --info
| Code: |
Portage 2.1_pre4-r1 (default-linux/x86/2005.1, gcc-3.4.4, glibc-2.3.5-r2, 2.6.15-nitro3 i686)
=================================================================
System uname: 2.6.15-nitro3 i686 Intel(R) Pentium(R) M processor 1600MHz
Gentoo Base System version 1.6.14
ccache version 2.3 [enabled]
dev-lang/python: 2.3.5-r2, 2.4.2
sys-apps/sandbox: 1.2.12
sys-devel/autoconf: 2.13, 2.59-r6
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1
sys-devel/binutils: 2.16.1
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.11-r2
ACCEPT_KEYWORDS="x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=pentium-m -mtune=pentium-m -pipe -ftracer -fomit-frame-pointer -ffast-math"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/kde/3/share/config /usr/lib/mozilla/defaults/pref /usr/share/X11/xkb /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/gconf /etc/splash /etc/terminfo /etc/env.d"
CXXFLAGS="-O2 -march=pentium-m -mtune=pentium-m -pipe -ftracer -ffast-math -fvisibility-inlines-hidden"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig ccache distlocks sandbox sfperms strict userpriv usersandbox"
GENTOO_MIRRORS="ftp://pandemonium.tiscali.de/pub/gentoo/ ftp://linux.rz.ruhr-uni-bochum.de/gentoo-mirror"
LANG="pl_PL"
LC_ALL="pl_PL"
LINGUAS="pl en"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="X a52 aac aalib accessibility acl acpi alsa amarok aotuv apm arts artswrappersuid artworkextra asf ati avi bash-completion berkdb binfilter bitmap-fonts bl bzip2 cddb cdparanoia cdr cle266 config_wizard cpudetection crypt cups dbus dedicated dga directfb divx4linux dmx doc dri dts dv dvb dvd dvdr dvdread dxr3 eds elf emboss encode esd exif extraicons extramodules fbcon ffmpeg firefox flac fontconfig foomaticdb fortran fpx gdbm ggi gif gnome gnutls gpg gphoto2 gpm grammar gstreamer gtk gtk2 gtkhtml gzip hal howl i8x0 idn ieee1394 imagemagick imlib insecure-savers jabber java jbig jpeg jpeg2k kde kerberos krb4 libcaca libg++ libgda libwww lirc lm_sensors logitech-mouse lzo mad math matroska mikmod mjpeg mmx mmx2 mmxext mng mono motif mozilla moznoxft mozsvg mp3 mpeg mplayer musepack musicbrainz ncurses network new-login nfs nls nntp nsplugin ogg oggvorbis on-the-fly-crypt openexr opengl oss pam pcmcia pda pdf pdflib perl png python qmail qt quicktime quile rdesktop readline real rle rpm samba sasl scanner sdl sensord slp smaba sndfile snmp sometime speech speex spell sse sse2 ssl svg svga symlink tcltk tcpd tga theora thesaurus tiff tlen toolbar tools truetype truetype-fonts type1-fonts unicode usb v4l v4l2 vcd vidix visualization voice vorbis wifi win32codecs wmf wordperfect x86 xanim xcomposite xine xml2 xmms xosd xpm xprint xscreensaver xv xvid xvmc zeroconf zlib elibc_glibc input_devices_synaptics input_devices_mouse input_devices_keyboard input_devices_joystick kernel_linux linguas_pl linguas_en userland_GNU video_cards_fglrx video_cards_ati"
Unset: ASFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, LDFLAGS
|
Zapomniałem dodać, że mam wersję mobility Radeona 9600
Co do:
to nie wiem jak u kolegi, który założył wątek ale u mnie jak mi się nie powiesi podczas przechodzenia z Xow do konsoli to się już nie powiesi. Zresztą zwis zdarza sie nie zawsze i tylko podczas:
a. wylogowania z Gnoma lub KDE lub próby przełączenia użytkownika (często)
b. przechodzenia z Xow do konsoli (rzadko) nigdy nie zdarzył się na odwrót to znaczy z konsoli do Xow
c. wyłączania systemu, restartu - kiedy X się zamykają (rzadko) ale nigdy gdy zamykam system z konsoli nawet jak X działają[/glep][/quote]
Kiedyś znalazłem wątek w częsci anglojęzycznej forum z podobnym problemem na jądrze 2.6.12. Tam został on rozwiązany poprzez jakiś patch - tyle, że w jądrach 2.6.15 chyba ten patch już powinien być. W każdym razie nie mogę tego wątku ponownie odszukać.
Nic specjalnie złego nie znalazłem w logach Xow.
_________________
Dell XPS Gentoo 3.12.2 GCC 4.8.2 KDE 4.11 |
|
| Back to top |
|
|
mrudzki
n00b
Joined: 14 Feb 2006
Posts: 20
Location: Poland
|
| Posted: Thu Feb 23, 2006 9:46 am Post subject: |
|
|
witam, ponownie troche sie pomeczylem, ale zaraz o tym, oto co pokazalo mi emerge --info
| Code: |
Portage 2.0.54 (default-linux/x86/2005.1, gcc-3.3.6, glibc-2.3.5-r2, 2.6.15-gentoo-r4 i686)
=================================================================
System uname: 2.6.15-gentoo-r4 i686 AMD Athlon(tm)
Gentoo Base System version 1.6.14
dev-lang/python: 2.3.5-r2, 2.4.2
sys-apps/sandbox: 1.2.12
sys-devel/autoconf: 2.13, 2.59-r6
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1
sys-devel/binutils: 2.16.1
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.11-r2
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=athlon-xp -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.4/env /usr/kde/3.4/share/config /usr/kde/3.4/shutdown /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/share/config /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d"
CXXFLAGS="-O2 -march=athlon-xp -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig distlocks sandbox sfperms strict"
GENTOO_MIRRORS="http://gentoo.osuosl.org/ http://src.gentoo.pl "
LINGUAS="pl"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="x86 X alsa apm arts audiofile avi berkdb bitmap-fonts bzip2 crypt cups eds emboss encode expat fam foomaticdb fortran gdbm gif gnome gpm gstreamer gtk gtk2 idn imagemagick imlib ipv6 jpeg kde lcms libg++ libwww mad mikmod mng motif mp3 mpeg ncurses nls ogg oggvorbis opengl oss pam pcre pdflib perl png python qt quicktime readline sdl spell ssl tcpd tiff truetype truetype-fonts type1-fonts udev vorbis xml2 xmms xv zlib linguas_pl userland_GNU kernel_linux elibc_glibc"
Unset: ASFLAGS, CTARGET, LANG, LC_ALL, LDFLAGS, PORTDIR_OVERLAY
|
zmienilem kernela linux-2.6.15-gentoo-r1 na linux-2.6.15-gentoo-r4 usunolem stare sterowniki od ATi
| Code: | | emerge unmerge ati-drivers |
skompilowalem sobie od nowa wlaczajac w kernelu opcje (niewiem czy to cos pomoglo)
| Code: |
Processor type and features --->
...
[*] Machine Check Exception
<*> Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4
....
|
poczym znow zainstalowalem ati-drivers
zrobilem reboot i dziala mi wszystko jak powinno, nawet moge wejsc w opengl w control center (kde) tylko nie jestem pewien czy pomogla zmiana jajka czy te opcje
sprawdze jak mi sie skonczy emergowac openoffice 2.0 /robi to od wczoraj/
dzieki i pozdrowienia dla wszystkich
_________________
AMD Athlon XP 2000+ (OC to 2400+)
1024 MB PC3200 DDR (OC to CL2.5)
Abit NF7-S (nforce2 400)
Gainward - nVidia G-Force TI 4600 128/128
---------------------------------------------------
Gentoo Linux, Kernel 2.6.16
Windows XP Pro |
|
| Back to top |
|
|
mrudzki
n00b
Joined: 14 Feb 2006
Posts: 20
Location: Poland
|
| Posted: Fri Feb 24, 2006 7:23 pm Post subject: |
|
|
ROZWIAZANIE PROBLEMU
1. Udało mi sie uruchomic soundstorm na gentoo,
| Code: |
<M> Soundcard support
Advanced Linux Sound Architecture -->
<M> Advanced Linux Sound Architecture
<M> Sequencer support
<M> OSS mixer api
<M> OSS PCM ....
[ ] OSS mixer api <-- tego nie zaznaczac, z tym nie dzialala karta
PCI Devices -->
<M>Intel/SIS/nvidia/AMD/Ali AC97 Controller
|
wystarczylo sterowniki skompilowac jako modul, sprawdze jeszcze czy beda chodzic jak je wkompiluje na stale
2 i 3. pomoglo usuniecie sterownikow
| Code: |
emerge --unmerge ati-drivers
|
i przejscie z kernela linux-2.6.15-gentoo-r1 na linux-2.6.15-gentoo-r4 oraz wlaczenie (tak mi sie wydaje) opcji w kernelu
| Code: |
Processor type and features --->
...
[*] Machine Check Exception
<*> Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4
....
|
ponowna instalacja ow sterownikow
karta zaczela lepiej chodzic i przestal sie komp zawieszac podczas resetow, czy zamykania systemu. Nawet w kontrol panel w kde moge przejrzec sobie (Opengl).
dzieki wszystkim za pomoc, pozdrowiam
_________________
AMD Athlon XP 2000+ (OC to 2400+)
1024 MB PC3200 DDR (OC to CL2.5)
Abit NF7-S (nforce2 400)
Gainward - nVidia G-Force TI 4600 128/128
---------------------------------------------------
Gentoo Linux, Kernel 2.6.16
Windows XP Pro |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Polskie forum (Polish)
