| View previous topic :: View next topic |
| Author |
Message |
vutives
Guru
Joined: 25 Sep 2005
Posts: 348
Location: Poland
|
 Posted: Sat Feb 25, 2006 3:16 pm Post subject: [SOLVED]Problem z ALSA - brak karty |
 |
|
Zainstalowalem sterowniki ALSA. Dzwiek dzialal, bylo ok. Potem uruchomilem ponownie komputer i juz dziweku ni ma. Pozatym 'aplay' nie dzialal. Wiec odinstalowalem i zainstalowalem sterowniki ponownie. Teraz po wpisaniu 'aplay' wywala mi to
| Code: | localhost ~ # aplay
ALSA lib confmisc.c:672:(snd_func_card_driver) cannot find card '0'
ALSA lib conf.c:3491:(_snd_config_evaluate) function snd_func_card_driver returned error: No such device
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:3491:(_snd_config_evaluate) function snd_func_concat returned error: No such device
ALSA lib confmisc.c:1072:(snd_func_refer) error evaluating name
ALSA lib conf.c:3491:(_snd_config_evaluate) function snd_func_refer returned error: No such device
ALSA lib conf.c:3960:(snd_config_expand) Evaluate error: No such device
ALSA lib pcm.c:2107:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:547: audio open error: No such device
|
Jakby nie mogl znalezc karty. Moja wersja ALSY: 1.0.11_rc3.
/etc/modules.d/alsa
| Code: | # Alsa 0.9.X kernel modules' configuration file.
# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.4 2004/11/16 01:31:22 eradicator Exp $
# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
alias snd-card-0 snd-intel8x0
## alias snd-card-1 snd-ens1371
## OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
## OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
# Set this to the correct number of cards.
options snd cards_limit=1
|
Last edited by vutives on Sun Feb 26, 2006 7:42 pm; edited 1 time in total |
|
| Back to top |
|
 |
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
| Posted: Sat Feb 25, 2006 3:20 pm Post subject: |
|
|
a alsamixer dziala?
Moze w /dev nie masz urzadzen?
Jest specjalny soft do tworzenia urzadzen w /dev
Mysle ze to wina udeva 
_________________
Asio Software Technologies
Belliash IT Weblog |
|
| Back to top |
|
|
sebas86
Guru
Joined: 01 May 2005
Posts: 568
Location: Szczecinek / Szczecin
|
| Posted: Sat Feb 25, 2006 4:14 pm Post subject: |
|
|
Hej a dodałeś odpowiednie wpisy w /etc/modules.autoload? Przy kompilacji modułów na pewno załadowało Ci je automatycznie a po restarcie niestety system nie domyśla się, o które sterowniki chodzi. Hm a może nie masz dodanej alsy do init'a (rc-update add alsa default).
_________________
Nieważne jaka dystrybucja, ważne, że Linux! |
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
| Posted: Sat Feb 25, 2006 4:43 pm Post subject: |
|
|
Nie dopisuje sie niczego.
Poprostu daje sie rc-update add alsasound default
DEFAULT => Nie BOOT jak to gdzies czytalem...
_________________
Asio Software Technologies
Belliash IT Weblog |
|
| Back to top |
|
|
sebas86
Guru
Joined: 01 May 2005
Posts: 568
Location: Szczecinek / Szczecin
|
| Posted: Sat Feb 25, 2006 5:42 pm Post subject: |
|
|
| rafkup wrote: | | Nie dopisuje sie niczego. |
Jeśli to są moduły instalowane przez emerge, jeśli te razem z kernelem to prawdopodobnie trzeba dopisać (przynajmniej, nie dawno jak używałem swojego twardziela z Gentoo na kompie u brata i trzymałem tymczasowo moduły do jego dźwiękówki to musiałem tak robić, lub ręcznie ładować po starcie systemu i restartować usługe ALSA.
Ten BOOT może być jeśli trochę zmodyfikujesz parametry jądra i utworzysz nowy podkatalog /etc/runlevels. Osobiście mam default oraz defaultxdm (automatyczny start graficznego menadżera logowania) tak zrobiony.
_________________
Nieważne jaka dystrybucja, ważne, że Linux! |
|
| Back to top |
|
|
vutives
Guru
Joined: 25 Sep 2005
Posts: 348
Location: Poland
|
| Posted: Sat Feb 25, 2006 9:10 pm Post subject: |
|
|
Wiec tak, nie dopisywalem niczego. Wczesniej nic nie dopisywalem i bylo dobrze. Dodalem alsa za pomoca rc-update do boot. Amixer i alsamixer nie dziala.
| Code: | localhost ~ # amixer
amixer: Mixer attach default error: No such device
|
| Code: | localhost ~ # alsamixer
alsamixer: function snd_ctl_open failed for default: No such device
|
Probowalem cos takiego
| Code: | localhost ~ # insmod snd-mixer-oss
insmod: can't read 'snd-mixer-oss': No such file or director |
i to
| Code: | localhost ~ # insmod snd-pcm-oss
insmod: can't read 'snd-pcm-oss': No such file or directory
|
Przy starcie systemu dostaje cos takiego
| Code: | dmesg
...
PCI: Setting latency timer of device 0000:00:1f.5 to 64
Unable to handle kernel NULL pointer dereference at virtual address 00000049
printing eip:
e0879a7d
*pde = 00000000
Oops: 0000 [#1]
PREEMPT SMP
Modules linked in: snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc
CPU: 0
EIP: 0060:[<e0879a7d>] Not tainted VLI
EFLAGS: 00010202 (2.6.15-gentoo-r1)
EIP is at intel8x0_measure_ac97_clock+0x4d/0x370 [snd_intel8x0]
eax: 00000001 ebx: deda3424 ecx: e087b25c edx: e087b25b
esi: df6f5000 edi: deda3437 ebp: deda3400 esp: df573e44
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 2980, threadinfo=df572000 task=df567a30)
Stack: ffffffff 00000001 00000002 ffffffff ffffffff deda3424 00000000 deda3437
deda3400 c0223687 deda3424 00000000 deda3437 deda3400 e087a71b df6f5000
00000050 e087b242 deda3424 e18cf313 dffffa00 00000014 df6f5000 ffffffed
Call Trace:
[<c0223687>] snprintf+0x27/0x30
[<e087a71b>] snd_intel8x0_probe+0x1bb/0x200 [snd_intel8x0]
[<c022a879>] pci_call_probe+0x19/0x20
[<c022a8e5>] __pci_device_probe+0x65/0x80
[<c022a92f>] pci_device_probe+0x2f/0x50
[<c02ac3db>] driver_probe_device+0x3b/0xb0
[<c02ac4d0>] __driver_attach+0x0/0x60
[<c02ac520>] __driver_attach+0x50/0x60
[<c02ab929>] bus_for_each_dev+0x69/0x80
[<c02ac555>] driver_attach+0x25/0x30
[<c02ac4d0>] __driver_attach+0x0/0x60
[<c02abe7d>] bus_add_driver+0x8d/0xe0
[<c022ac04>] __pci_register_driver+0x84/0xc0
[<e084b018>] alsa_card_intel8x0_init+0x18/0x1c [snd_intel8x0]
[<c013ae04>] sys_init_module+0x164/0x210
[<c0103165>] syscall_call+0x7/0xb
Code: 00 00 74 1a 8b 5c 24 28 8b 74 24 2c 8b 7c 24 30 8b 6c 24 34 83 c4 38 c3 8d b6 00 00 00 00 8b 46 2c 8b 80 b8 00 00 00 85 c0 74 09 <81> 78 48 ff 7f 00 00 77 20 b9 40 ab 87 e0 ba e8 09 00 00 89 4c
... |
Czemu nagle to przestalo dzialac? I o jakie urzadzenia w /dev chodzilo? Wczesniej robilem te samo akcje i dzialalo... |
|
| Back to top |
|
|
ilny
Apprentice
Joined: 16 Nov 2005
Posts: 239
Location: [Poland] [Wlkp]
|
| Posted: Sat Feb 25, 2006 9:26 pm Post subject: |
|
|
Sprobuj to, z handbooka :
| Quote: | | Jeśli podczas pracy z alsamixer wystąpią błędy, takie jak np. "alsamixer: function snd_ctl_open failed for default: No such file or directory", oznacza to najprawdopodobniej nieprawidłowo ustawione przez udev prawa dostępu do urządzeń. W celu przeładowania wpisów w /dev i naprawienia tego problemu należy wykonać polecenie killall udevd; udevstart. |
_________________
Use!: [stage1/stage3 & minimal CD ] |
|
| Back to top |
|
|
vutives
Guru
Joined: 25 Sep 2005
Posts: 348
Location: Poland
|
| Posted: Sat Feb 25, 2006 9:39 pm Post subject: |
|
|
| Dalej to samo |
|
| Back to top |
|
|
sebas86
Guru
Joined: 01 May 2005
Posts: 568
Location: Szczecinek / Szczecin
|
| Posted: Sat Feb 25, 2006 9:59 pm Post subject: |
|
|
| Pablord wrote: |
| Code: | dmesg
...
PCI: Setting latency timer of device 0000:00:1f.5 to 64
Unable to handle kernel NULL pointer dereference at virtual address 00000049
... |
|
Hm dziwna sprawa... a rekompilowałeś może kernela? Jak tak to sprawdź czy masz w ogóle włączone wsparcie dla urządzeń dźwiękowych.
_________________
Nieważne jaka dystrybucja, ważne, że Linux! |
|
| Back to top |
|
|
vutives
Guru
Joined: 25 Sep 2005
Posts: 348
Location: Poland
|
| Posted: Sat Feb 25, 2006 10:22 pm Post subject: |
|
|
| Kernelu zaladowalem moduly dla dzwieku. Wyglada na to ze nie mam odpowiednich urzadzen w dev ( http://www.jtz.org.pl/Html/Sound-HOWTO.pl-6.html#ss6.5 ). Te how to jest troche przestarzale. Jak mam utworzyc odpowiednie pliki w /dev (jesli to ma pomoc zadzialac)? |
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
| Posted: Sun Feb 26, 2006 9:33 am Post subject: |
|
|
1) Jak masz alsa-driver to tylko rc-update add alsasound default
2) Jak amsz z kernela to stawia sie alsa-utils i tak samo jak w pkt 1 
3) Insmod laduje modul ktory jest w . => powinienes za tem uzyc komendy modprobe  .
4) Zdaje sie ze 1 moj post w tym topicu dal juz odpowiedz. Nie masz urzadzen w /dev i trzeba je stworzyc. Pogooglaj za Device Node Maker (skrypt ktory Ci je potworzy).
Problem dosyc czesto spotykany, sam nie raz sie nim spotkalem.
IMHO Jak dla mnie SOLVED.
_________________
Asio Software Technologies
Belliash IT Weblog |
|
| Back to top |
|
|
vutives
Guru
Joined: 25 Sep 2005
Posts: 348
Location: Poland
|
| Posted: Sun Feb 26, 2006 10:09 am Post subject: |
|
|
| Troche nieczytelny dla twoj ostatni post. W kernely wsparcie dla kart dzwiekowych i alsa mam jako moduly. Zainstalowalem alsa-driver i alsa-utils. Mam wiec dodac rc-update add alsasound default? Czy tez w takim wypadku zainstalowac tylko alsa-utils? |
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
| Posted: Sun Feb 26, 2006 10:13 am Post subject: |
|
|
alsa-utils dostarcza alsamixer i skrypt alsasound.
Wiec chyab wypadaloby njpierw zainstalowac alsa-utils a pozniej dodac alsasound do runlevela?
_________________
Asio Software Technologies
Belliash IT Weblog |
|
| Back to top |
|
|
WujekStaszek
n00b
Joined: 18 Feb 2006
Posts: 18
|
| Posted: Sun Feb 26, 2006 10:18 am Post subject: |
|
|
_________________
Gentoo 2006.0, Fluxbox, Firefox 1.5 @ Celerdon D 330 [2.66 @ 3 GHz] 512 MB RAM. |
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
|
| Back to top |
|
|
pwe
Guru
Joined: 12 Mar 2005
Posts: 445
Location: Polska aka Poland
|
| Posted: Sun Feb 26, 2006 12:12 pm Post subject: |
|
|
| rafkup wrote: |
Nooo tak, jasne.
Z innego distra sie chyba urwales |
czemu?? przeciez to działa i pewnie zadziałą |
|
| Back to top |
|
|
vutives
Guru
Joined: 25 Sep 2005
Posts: 348
Location: Poland
|
| Posted: Sun Feb 26, 2006 12:40 pm Post subject: |
|
|
| Zrobilem alsaconf ale dalej nie ma karty... Niby wykryl intel8x0 ale podem po poleceniu amixer jest 'no such device'. Gdzie jest jakis program do tworzenia tych plikow bo nie znalazlem na googlu? |
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
| Posted: Sun Feb 26, 2006 12:43 pm Post subject: |
|
|
Przeciez wam tlumacze ze wszystko jest dobrze skonfigurowane trzeba tylko potworzyc urzadzenia.
| Code: | #!/bin/bash
MAJOR=116
OSSMAJOR=14
MAX_CARDS=4
PERM=666
OWNER=root.root
DIR_PERM=755
DIR_OWNER=root.root
if [ "`grep -w -E "^audio" /etc/group`x" != x ]; then
PERM=660
OWNER=root.audio
DIR_PERM=750
DIR_OWNER=root.audio
fi
function create_odevice () {
rm -f $1
echo -n "Creating $1..."
mknod -m $PERM $1 c $OSSMAJOR $2
chown $OWNER $1
echo " done"
}
function create_odevices () {
tmp=0
tmp1=0
rm -f $1 $1?
echo -n "Creating $1?..."
while [ $tmp1 -lt $MAX_CARDS ]; do
minor=$[ $2 + $tmp ]
mknod -m $PERM $1$tmp1 c $OSSMAJOR $minor
chown $OWNER $1$tmp1
tmp=$[ $tmp + 16 ]
tmp1=$[ $tmp1 + 1 ]
done
echo " done"
}
function create_device1 () {
rm -f $1
minor=$2
echo -n "Creating $1..."
mknod -m $PERM $1 c $MAJOR $minor
chown $OWNER $1
echo " done"
}
function create_devices () {
tmp=0
rm -f $1 $1?
echo -n "Creating $1?..."
while [ $tmp -lt $MAX_CARDS ]; do
minor=$[ $tmp * 32 ]
minor=$[ $2 + $minor ]
mknod -m $PERM "${1}C${tmp}" c $MAJOR $minor
chown $OWNER "${1}C${tmp}"
tmp=$[ $tmp + 1 ]
done
echo " done"
}
function create_devices2 () {
tmp=0
rm -f $1 $1?
echo -n "Creating $1??..."
while [ $tmp -lt $MAX_CARDS ]; do
tmp1=0
while [ $tmp1 -lt $3 ]; do
minor=$[ $tmp * 32 ]
minor=$[ $2 + $minor + $tmp1 ]
mknod -m $PERM "${1}C${tmp}D${tmp1}" c $MAJOR $minor
chown $OWNER "${1}C${tmp}D${tmp1}"
tmp1=$[ $tmp1 + 1 ]
done
tmp=$[ $tmp + 1 ]
done
echo " done"
}
function create_devices3 () {
tmp=0
rm -f $1 $1?
echo -n "Creating $1??$4..."
while [ $tmp -lt $MAX_CARDS ]; do
tmp1=0
while [ $tmp1 -lt $3 ]; do
minor=$[ $tmp * 32 ]
minor=$[ $2 + $minor + $tmp1 ]
mknod -m $PERM "${1}C${tmp}D${tmp1}${4}" c $MAJOR $minor
chown $OWNER "${1}C${tmp}D${tmp1}${4}"
tmp1=$[ $tmp1 + 1 ]
done
tmp=$[ $tmp + 1 ]
done
echo " done"
}
if test "$1" = "-?" || test "$1" = "-h" || test "$1" = "--help"; then
echo "Usage: snddevices [max]"
exit
fi
if test "$1" = "max"; then
DSP_MINOR=19
fi
# OSS (Lite) compatible devices...
if test $OSSMAJOR -eq 14; then
create_odevices /dev/mixer 0
create_odevice /dev/sequencer 1
create_odevices /dev/midi0 2 # /dev/midi is for tclmidi
create_odevices /dev/dsp 3
create_odevices /dev/audio 4
create_odevice /dev/sndstat 6
create_odevice /dev/music 8
create_odevices /dev/dmmidi 9
create_odevices /dev/dmfm 10
create_odevices /dev/amixer 11 # alternate mixer
create_odevices /dev/adsp 12 # alternate dsp
create_odevices /dev/amidi 13 # alternate midi
create_odevices /dev/admmidi 14 # alternate direct midi
# create symlinks
ln -svf /dev/mixer0 /dev/mixer
ln -svf /dev/midi00 /dev/midi # /dev/midi0 is for tclmidi
ln -svf /dev/dsp0 /dev/dsp
ln -svf /dev/audio0 /dev/audio
ln -svf /dev/music /dev/sequencer2
ln -svf /dev/adsp0 /dev/adsp
ln -svf /dev/amidi0 /dev/amidi
fi
# Remove old devices
mv -f /dev/sndstat /dev/1sndstat
rm -f /dev/snd*
mv -f /dev/1sndstat /dev/sndstat
if [ -d /dev/snd ]; then
rm -f /dev/snd/*
rmdir /dev/snd
fi
# Create new ones
mkdir -m $DIR_PERM -p /dev/snd
chown $DIR_OWNER /dev/snd
create_devices /dev/snd/control 0
create_device1 /dev/snd/seq 1
create_device1 /dev/snd/timer 33
create_devices2 /dev/snd/hw 4 4
create_devices2 /dev/snd/midi 8 8
create_devices3 /dev/snd/pcm 16 8 p
create_devices3 /dev/snd/pcm 24 8 c
# Loader devices
echo "ALSA loader devices"
rm -f /dev/aload*
create_devices /dev/aload 0
create_device1 /dev/aloadSEQ 1 |
Po odpaleniu tego skryptu powinno byc OK.
P.S. Googlarka nie gryzie.
_________________
Asio Software Technologies
Belliash IT Weblog |
|
| Back to top |
|
|
WujekStaszek
n00b
Joined: 18 Feb 2006
Posts: 18
|
| Posted: Sun Feb 26, 2006 12:45 pm Post subject: |
|
|
| rafkup wrote: | Nooo tak, jasne.
Z innego distra sie chyba urwales |
Zawsze uzywam tego polecenia w kazdej dystrybucji - przynajmniej mam pewnosc, ze wszystko bedzie dobrze, na Gentoo dziala bardzo dobrze.
| Code: | env ALSA_CARDS='intel8x0' emerge alsa-driver
alsaconf
rc-update add alsasound boot |
Mam taka sama karte - te polecenia dzialaja (u mnie dzialaja).
_________________
Gentoo 2006.0, Fluxbox, Firefox 1.5 @ Celerdon D 330 [2.66 @ 3 GHz] 512 MB RAM. |
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
| Posted: Sun Feb 26, 2006 12:56 pm Post subject: |
|
|
| WujekStaszek wrote: | | rafkup wrote: | Nooo tak, jasne.
Z innego distra sie chyba urwales |
Zawsze uzywam tego polecenia w kazdej dystrybucji - przynajmniej mam pewnosc, ze wszystko bedzie dobrze, na Gentoo dziala bardzo dobrze.
| Code: | env ALSA_CARDS='intel8x0' emerge alsa-driver
alsaconf
rc-update add alsasound boot |
Mam taka sama karte - te polecenia dzialaja (u mnie dzialaja). |
Czytasz co sie do Ciebie pisze?
Po primo, sterowniki sa zainstalowane, laduja sie alenie ma urzadze w /dev
A po secunod rc-update add alsasound default a nie boot  .
_________________
Asio Software Technologies
Belliash IT Weblog |
|
| Back to top |
|
|
vutives
Guru
Joined: 25 Sep 2005
Posts: 348
Location: Poland
|
| Posted: Sun Feb 26, 2006 1:00 pm Post subject: |
|
|
Rafkup, odpalilem ten skrypt. Nie pomoglo... Dalej jest 'no such device'...
| Code: | localhost ~ # /alsa
Creating /dev/mixer?... done
Creating /dev/sequencer... done
Creating /dev/midi0?... done
Creating /dev/dsp?... done
Creating /dev/audio?... done
Creating /dev/sndstat... done
Creating /dev/music... done
Creating /dev/dmmidi?... done
Creating /dev/dmfm?... done
Creating /dev/amixer?... done
Creating /dev/adsp?... done
Creating /dev/amidi?... done
Creating /dev/admmidi?... done
create symbolic link `/dev/mixer' to `/dev/mixer0'
create symbolic link `/dev/midi' to `/dev/midi00'
create symbolic link `/dev/dsp' to `/dev/dsp0'
create symbolic link `/dev/audio' to `/dev/audio0'
create symbolic link `/dev/sequencer2' to `/dev/music'
create symbolic link `/dev/adsp' to `/dev/adsp0'
create symbolic link `/dev/amidi' to `/dev/amidi0'
rm: cannot remove `/dev/snd': Is a directory
Creating /dev/snd/control?... done
Creating /dev/snd/seq... done
Creating /dev/snd/timer... done
Creating /dev/snd/hw??... done
Creating /dev/snd/midi??... done
Creating /dev/snd/pcm??p... done
Creating /dev/snd/pcm??c... done
ALSA loader devices
Creating /dev/aload?... done
Creating /dev/aloadSEQ... done
|
Taki jest wynik tego skryptu
Last edited by vutives on Sun Feb 26, 2006 1:07 pm; edited 2 times in total |
|
| Back to top |
|
|
WujekStaszek
n00b
Joined: 18 Feb 2006
Posts: 18
|
| Posted: Sun Feb 26, 2006 1:02 pm Post subject: |
|
|
| rafkup wrote: | Czytasz co sie do Ciebie pisze?
Po primo, sterowniki sa zainstalowane, laduja sie alenie ma urzadze w /dev
A po secunod rc-update add alsasound default a nie boot . |
Tak, czasem czytam, a ten boot wzialem ze strony gentoo.pl, dziala.
Kiedys mialem podobnie w Slackwarze i mialem cos zle z modulami. Pewnie tym razem to problem z dev'ami, az tak sie nie znam.
_________________
Gentoo 2006.0, Fluxbox, Firefox 1.5 @ Celerdon D 330 [2.66 @ 3 GHz] 512 MB RAM. |
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
| Posted: Sun Feb 26, 2006 1:14 pm Post subject: |
|
|
Opis na stronie gentoo.pl jest stary.
Zajrzyj do mauala => lepiej zrobisz
Slackware to nie Gentoo.
wpisz /etc/init.d/alsasound stop i zobacz czy wywali jakis blad. jesli tak, pokaz jaki
_________________
Asio Software Technologies
Belliash IT Weblog |
|
| Back to top |
|
|
vutives
Guru
Joined: 25 Sep 2005
Posts: 348
Location: Poland
|
| Posted: Sun Feb 26, 2006 1:30 pm Post subject: |
|
|
| Code: | ~ # /etc/init.d/alsasound stop
* Caching service dependencies ... [ ok ]
* Storing ALSA Mixer Levels ...
/usr/sbin/alsactl: save_state:1163: No soundcards found... [ !! ]
* Unloading ALSA ... [ ok ]
* Unloading ALSA modules ... [ !! ] |
|
|
| Back to top |
|
|
Belliash
Advocate
Joined: 24 Nov 2004
Posts: 2503
Location: Wroclaw, Poland
|
| Posted: Sun Feb 26, 2006 1:31 pm Post subject: |
|
|
Interesuje mnie:
1) cat /etc/make.conf
2) cat /etc/modules.d/alsa
3) emerge -pv alsa-driver
4) cat /usr/src/linux/.config
Mozesz jeszcze zrobic:
emerge epm
epm -qa | grep alsa
_________________
Asio Software Technologies
Belliash IT Weblog |
|
| Back to top |
|
|
|
Polskie forum (Polish)
