| View previous topic :: View next topic |
| Author |
Message |
rosebud
n00b
Joined: 27 Feb 2006
Posts: 65
Location: paris ni texas ni hilton
|
 Posted: Wed Mar 01, 2006 10:30 am Post subject: [DVB-T] configurer une carte TV TNT asus 7131 dual |
 |
|
bonjour
j'ai une carte asus 7131 dual tnt que je ne sais pas faire marcher.
elle est reconnue, elle utilise un saa7134.
j'ai vu dans le wiki que dans le kernel 2.6.15 c'est la carte 78.
si quelq'un a réussi à faire marcher cette carte ou s'il peut m'aider merci
lsmod
Module Size Used by
analog 11936 0
ns558 6532 0
gameport 16264 3 analog,ns558
snd_opl3_lib 11264 0
snd_hwdep 10016 1 snd_opl3_lib
snd_cs4231_lib 25472 0
snd_pcm 82052 1 snd_cs4231_lib
snd_timer 24196 3 snd_opl3_lib,snd_cs4231_lib,snd_pcm
snd_page_alloc 11528 2 snd_cs4231_lib,snd_pcm
snd_mpu401 7624 0
snd_mpu401_uart 8320 1 snd_mpu401
snd_rawmidi 24736 1 snd_mpu401_uart
snd_seq_device 9484 2 snd_opl3_lib,snd_rawmidi
snd 53604 9 snd_opl3_lib,snd_hwdep,snd_cs4231_lib,snd_pcm,snd_timer,snd_mpu401,snd_mpu401_uart,snd_rawmidi,snd_seq_device
parport_pc 38724 0
parport 34888 1 parport_pc
floppy 58852 0
pcspkr 3204 0
tuner 41252 0
saa7134 111328 0
video_buf 21764 1 saa7134
v4l2_common 6912 1 saa7134
v4l1_compat 14468 1 saa7134
ir_kbd_i2c 9228 1 saa7134
ir_common 10500 2 saa7134,ir_kbd_i2c
videodev 10240 1 saa7134
nvsound 1533800 0
forcedeth 22660 0
i2c_nforce2 7552 0
i2c_core 21376 4 tuner,saa7134,ir_kbd_i2c,i2c_nforce2
nvidia_agp 8732 1
rtc 10004 0
nvidia 3469788 12
agpgart 34508 2 nvidia_agp,nvidia
dm_mirror 22096 0
dm_mod 55320 1 dm_mirror
sata_mv 18436 0
ata_piix 11140 0
ahci 14212 0
sata_qstor 10756 0
sata_vsc 9220 0
sata_uli 8452 0
sata_sis 9220 0
sata_sx4 14724 0
sata_nv 10500 0
sata_via 9860 0
sata_svw 8708 0
sata_sil 10244 0
sata_promise 12548 0
libata 56844 13 sata_mv,ata_piix,ahci,sata_qstor,sata_vsc,sata_uli,sata_sis,sata_sx4,sata_nv,sata_via,sata_svw,sata_sil,sata_promise
sbp2 24068 0
ohci1394 33460 0
ieee1394 95032 2 sbp2,ohci1394
sl811_hcd 13184 0
ohci_hcd 20356 0
uhci_hcd 31888 0
usb_storage 69824 0
usbhid 45920 0
ehci_hcd 29576 0
usbcore 118916 7 sl811_hcd,ohci_hcd,uhci_hcd,usb_storage,usbhid,ehci_hcd
localhost ~ # lspci
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
01:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
02:00.0 VGA compatible controller: nVidia Corporation NV36.2 [GeForce FX 5700] (rev a1)
_________________
ma config: asustek a7n8x deluxe nforce 2, athlon xp 2800, 512 ram, leadtek nvidia fx 5700 écran plat 19' belinea, clavier et souris sans fil logitech mx et palette wacom graphire carte tnt asus 7131 dual+fm |
|
| Back to top |
|
 |
Mickael
Advocate
Joined: 05 Sep 2005
Posts: 2387
Location: ~Belfort! - France - EU
|
| Posted: Wed Mar 01, 2006 10:46 am Post subject: |
|
|
Salut,
en plus du lsmod un petit serait également utile pour ceux, comme moi qui n'ont pas cette carte, mais qui peuvent peut être de donner un coup de main.
Ceci sera problement suivi d'une requête du genre :
| Code: | modprob -l | grep "le ou les modules qui vont bien dans le kernel et qui concerne(nt) ta carte"
|
EDIT : Désolé rosebud, j'avais pas vu ton lspci "tout court" dans ton premier poste.
EDIT 2 : Tu peux nous donner le lien de ton wiki, et as tu choisi cela dans le kernel :
| Quote: | Device Drivers --->
Character devices --->
<M> /dev/agpgart (AGP Support)
< > ALI chipset support
< > ATI chipset support
< > AMD Irongate, 761, and 762 chipset support
< > AMD Opteron/Athlon64 on-CPU GART support
< > Intel 440LX/BX/GX, I8xx and E7x05 chipset support
<M> NVIDIA nForce/nForce2 chipset support
< > SiS chipset support
< > Serverworks LE/HE chipset support
< > VIA chipset support
< > Transmeta Efficeon support |
Last edited by Mickael on Wed Mar 01, 2006 11:25 am; edited 3 times in total |
|
| Back to top |
|
|
rosebud
n00b
Joined: 27 Feb 2006
Posts: 65
Location: paris ni texas ni hilton
|
| Posted: Wed Mar 01, 2006 10:50 am Post subject: |
|
|
bonjour
localhost ~ # lspci -v
00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [40] AGP version 3.0
Capabilities: [60] HyperTransport: Host or Secondary Interface
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
Flags: 66MHz, fast devsel
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
Flags: 66MHz, fast devsel
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
Flags: 66MHz, fast devsel
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
Flags: 66MHz, fast devsel
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
Subsystem: ASUSTeK Computer Inc. Unknown device 80ac
Flags: 66MHz, fast devsel
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: [48] HyperTransport: Slave or Primary Interface
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device 0c11
Flags: 66MHz, fast devsel, IRQ 5
I/O ports at d000 [size=32]
Capabilities: [44] Power Management version 2
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 185
Memory at e7080000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 193
Memory at e7083000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 177
Memory at e7086000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. A7N8X Mainboard onboard nForce2 Ethernet
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 185
Memory at e7087000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d400 [size=8]
Capabilities: [44] Power Management version 2
00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device 0c11
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 193
Memory at e7000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [44] Power Management version 2
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
Subsystem: ASUSTeK Computer Inc. Unknown device 8095
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 177
I/O ports at d800 [size=256]
I/O ports at dc00 [size=128]
Memory at e7081000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: e6000000-e6ffffff
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device 0c11
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 809a
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 177
Memory at e7084000 (32-bit, non-prefetchable) [size=2K]
Memory at e7085000 (32-bit, non-prefetchable) [size=64]
Capabilities: [44] Power Management version 2
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: d0000000-dfffffff
01:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
Subsystem: ASUSTeK Computer Inc. P7131 Dual
Flags: bus master, medium devsel, latency 32, IRQ 209
Memory at e6000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [40] Power Management version 2
02:00.0 VGA compatible controller: nVidia Corporation NV36.2 [GeForce FX 5700] (rev a1) (prog-if 00 [VGA])
Subsystem: LeadTek Research Inc. Unknown device 298b
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 201
Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
[virtual] Expansion ROM at e5000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
merci pour ce que tu peux m aider
voici le lien o' on parle ce cette carte http://gentoo-wiki.com/HARDWARE_saa7134
il est dit quil faut un firmware
_________________
ma config: asustek a7n8x deluxe nforce 2, athlon xp 2800, 512 ram, leadtek nvidia fx 5700 écran plat 19' belinea, clavier et souris sans fil logitech mx et palette wacom graphire carte tnt asus 7131 dual+fm |
|
| Back to top |
|
|
Mickael
Advocate
Joined: 05 Sep 2005
Posts: 2387
Location: ~Belfort! - France - EU
|
| Posted: Wed Mar 01, 2006 11:42 am Post subject: |
|
|
Un coup de dsmeg (donne juste ce qui concerne ton problème.
Merci
EDIT : il faut vérifier que les nombres pour le tuner et ta carte son correcte :
| Quote: | | Once you have the card number and the tuner number, you can load the module. |
| Code: | | # modprobe saa7134 card=2 tuner=2 |
EDIT 2 : ensuite il faudra vérifier quelques options et ça devrait rouler. Mais tu peux spécifier ce que tu as fait ou tnter de faire stp. Danke.
EDIT 3 : ce lien parle également de carte similaire à la tienne avec le même chipset. Les questions qui lui sont posées pour vérifier la bonne configuration de base vallent également pour toi. Les réponses dans ce thraed de TTK et de Guilc sont particulièrement intéressantes.
EDIT 4 : | Quote: | | il est dit quil faut un firmware |
Exacte et toute la procédure est décrite. Mais avant il faudrait savoir si tout est bien configuré cad : les modules de base pour ta carte. |
|
| Back to top |
|
|
rosebud
n00b
Joined: 27 Feb 2006
Posts: 65
Location: paris ni texas ni hilton
|
| Posted: Wed Mar 01, 2006 1:47 pm Post subject: |
|
|
bonjour
Linux version 2.6.15-gentoo-r1 (root@livecd) (gcc version 3.3.5-20050130 (Gentoo 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #1 SMP Sat Feb 25 03:49:42 CET 2006
agpgart: Detected NVIDIA nForce2 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48.
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.14 loaded
saa7133[0]: found at 0000:01:09.0, rev: 208, irq: 209, latency: 32, mmio: 0xe6000000
saa7133[0]: subsystem: 1043:4862, board: ASUSTeK P7131 Dual [card=78,autodetected]
saa7133[0]: board init: gpio is 40000
saa7133[0]: i2c eeprom 00: 43 10 62 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d6 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 2-004b: chip found @ 0x96 (saa7133[0])
tuner 2-004b: setting tuner address to 61
tuner 2-004b: tuner: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
dans le wiki j'ai fait modprobe saa7134 card=78 tuner=54 (tda8290+75) mais apres je pense que ça ne sert à rien de lancer tvtime car il est pas conçu pour la tnt
merci
_________________
ma config: asustek a7n8x deluxe nforce 2, athlon xp 2800, 512 ram, leadtek nvidia fx 5700 écran plat 19' belinea, clavier et souris sans fil logitech mx et palette wacom graphire carte tnt asus 7131 dual+fm |
|
| Back to top |
|
|
Mickael
Advocate
Joined: 05 Sep 2005
Posts: 2387
Location: ~Belfort! - France - EU
|
| Posted: Wed Mar 01, 2006 3:58 pm Post subject: |
|
|
| Quote: |
tuner 2-004b: setting tuner address to 61
tuner 2-004b: tuner: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
dans le wiki j'ai fait modprobe saa7134 card=78 tuner=54 (tda8290+75) mais apres je pense que ça ne sert à rien de lancer tvtime car il est pas conçu pour la tnt |
Pour le tuner, pourquoi 54 et pas 61? je comprends pas très bien là 
EDIT : ça y est j'ai compris : | Quote: | | tuner=54 - tda8290+75 |
ok.
EDIT 2 : an lisant la partie audio du wiki, tu devrais déjà régler ton problème de son avec ta config alsa dans le kernel, avant d'aller plus avant dans la config de ta carte.  |
|
| Back to top |
|
|
rosebud
n00b
Joined: 27 Feb 2006
Posts: 65
Location: paris ni texas ni hilton
|
| Posted: Mon May 15, 2006 5:58 pm Post subject: |
|
|
bonsoir
j'ai changé de noyau et régler les problemes d'audio, je suis maintenant en 2.6.16. r7 et ma carteTNT ne marche toujours pas
j'ai fait emerge linuxtv-dvb-apps
puis dvbscan /usr/share/dvb/dvb-t/fr-Paris
j'ai eu ce message "scanning /usr/share/dvb/dvb-t/fr-Paris using /dev/dvb/adapter0/frontend0 et /dev/dvb/adapter0/ demux0 main 2216 failed to open /dev/dvb/adapter0 frontend0 : 6 no such device adress
dans le wiki il dise qu'il faut un firmware et qu'il y a un script j'ai donc eté dans /usr/src/linux/Documentation/dvb/ et j'ai tapé get_dvb_firmware il ne s'est rien passé 
que faire merci
_________________
ma config: asustek a7n8x deluxe nforce 2, athlon xp 2800, 512 ram, leadtek nvidia fx 5700 écran plat 19' belinea, clavier et souris sans fil logitech mx et palette wacom graphire carte tnt asus 7131 dual+fm |
|
| Back to top |
|
|
VG
n00b
Joined: 05 Sep 2004
Posts: 65
|
| Posted: Mon May 15, 2006 9:16 pm Post subject: |
|
|
Salut
a prioris il ne trouve pas les modules de ta carte tnt dans /dev
J'ai eu le même problème avec ma carte; je l'ai résolu en chargeant les module au démarrage via un modprobe. Il semblerait que pour les cartes tnt il y ait un bug lorsque l'on met les driver dans le noyau en dure: il reconnaît le dvb-T, mais ne met pas les composants dans /dev
En espérant que ça marche. |
|
| Back to top |
|
|
rosebud
n00b
Joined: 27 Feb 2006
Posts: 65
Location: paris ni texas ni hilton
|
| Posted: Tue May 16, 2006 11:06 am Post subject: |
|
|
bonjour
merci ça n'a pas marché
j'ai fait rnmod saa7134
modprobe saa7134 card=78 tuner=54
echo "saa7134" " chevrons 2fois " /etc/modules.autoload.d/kernel-2.6
update-modules
modprobe saa7134
et quand je re lance le dvbscan j'ai toujours la meme réponse failed..
peut etre une histoire de firmware mais comment on fait pour lancer le script shell perl get_dvb_firmware indiqué dans le wiki ?
merci
_________________
ma config: asustek a7n8x deluxe nforce 2, athlon xp 2800, 512 ram, leadtek nvidia fx 5700 écran plat 19' belinea, clavier et souris sans fil logitech mx et palette wacom graphire carte tnt asus 7131 dual+fm |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
