| View previous topic :: View next topic |
| Author |
Message |
holmis
n00b
Joined: 16 Mar 2003
Posts: 72
Location: Sweden
|
 Posted: Wed Mar 26, 2003 3:59 pm Post subject: Blank/gray screen in X |
 |
|
Hi, everyone.
Got a sinister probleme with X.
Some background info:
I did a stage-3 installation of Gentoo with gentoo-sources. I picked up XFree from GRP. Then I tried to do the same with kde, but it didn't work, so I had to emerge kde.
Now, everythings works great - almost. I can run kde for some days without any errors, but then suddenly the screen goes blank (or rather grayish) with some white/black horizontal stripe which I can move up and down with my mouse.  All processes are running as usual and I got full control from keyboard, but the screen is just gray.
The only thing to do is to Ctr-alt-backspace out of X or use some logout key-shortcut and then restart X and kde.
I just don't know anymore what to look for. I have enabled everything in my kernel that should be enabled (as far as i know). I have searched this forum threads and followed their advices from similar problems. But no luck. 
Video card: SiS6326
Kernel options:
I have enabled AGP-support as a module.
Generic SiS support is disabled.
No DRI support whatsoever is enabled.
Here is my /var/log/XFree86.0.log
| Code: |
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20-xfs_pre2 i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Mar 26 08:00:12 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Scott monitor 772"
(**) | |-->Device "SiS 6326"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "300 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "se"
(**) XKB: layout: "se"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/ ....
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000602c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 10ec,8029 card 10ec,8029 rev 00 class 02,00,00 hdr 00
(II) PCI: 00:0c:0: chip 1102,0002 card 1102,8065 rev 0a class 04,01,00 hdr 80
(II) PCI: 00:0c:1: chip 1102,7002 card 1102,0020 rev 0a class 09,80,00 hdr 80
(II) PCI: 01:00:0: chip 1039,6326 card 1569,6326 rev 0b class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xe6000000 - 0xe67fffff (0x800000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) SiS 6326 rev 11, Mem @ 0xe6000000/23, 0xe5000000/16, I/O @ 0xd000/7
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[1] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[2] -1 0xe6000000 - 0xe67fffff (0x800000) MX[B](B)
[3] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[4] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[5] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[6] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[7] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
[8] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[1] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[2] -1 0xe6000000 - 0xe67fffff (0x800000) MX[B](B)
[3] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[4] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[5] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[6] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[7] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
[8] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[6] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[7] -1 0xe6000000 - 0xe67fffff (0x800000) MX[B](B)
[8] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[11] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[12] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[13] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[14] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
[15] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "sis"
(II) Loading /usr/X11R6/lib/modules/drivers/sis_drv.o
(II) Module sis: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.6.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO, SIS550, SIS650/M650/651/740, SIS330(Xabre)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset SIS6326/AGP/DVD found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[6] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[7] -1 0xe6000000 - 0xe67fffff (0x800000) MX[B](B)
[8] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[11] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[12] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[13] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[14] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
[15] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[6] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[7] -1 0xe6000000 - 0xe67fffff (0x800000) MX[B](B)
[8] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[14] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[15] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[16] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[17] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
[18] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
[19] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) SIS(0): SiS driver (02/11/27-1) by Thomas Winischhofer <thomas@winischhofer.net>
(--) SIS(0): This adapter is primary display adapter
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(--) SIS(0): Chipset is SiS6326 AGP (H0) (revision 0x0b)
(--) SIS(0): Relocated IO registers at 0xD000
(**) SIS(0): Depth 16, (--) framebuffer bpp 16
(==) SIS(0): RGB weight 565
(==) SIS(0): Default visual is TrueColor
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(==) SIS(0): Using HW cursor
(==) SIS(0): Fast VRAM enabled (for write only)
(==) SIS(0): TurboQueue enabled
(--) SIS(0): Detected DRAM type: SGRAM
(--) SIS(0): Detected memory clock: 83.000 MHz
(--) SIS(0): Detected DRAM bus width: 64 bit
(--) SIS(0): Global linear framebuffer at 0xE6000000
(--) SIS(0): MMIO registers at 0xE5000000
(--) SIS(0): SiS6326: Detected 8192 KB VideoRAM, limiting to 4096 KB
(II) SIS(0): Using 4032K of framebuffer memory
(--) SIS(0): Chipset supports one video overlay
(--) SIS(0): Maximum pixel clock at 16 bpp is 175.5 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 2.0
(II) SIS(0): VESA VBE Total Mem: 4096 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6326
(II) SIS(0): VESA VBE OEM Product Rev:
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) SIS(0): VESA VBE DDC supported
(II) SIS(0): VESA VBE DDC Level 2
(II) SIS(0): VESA VBE DDC transfer in appr. 1 sec.
(II) SIS(0): VESA VBE DDC read successfully
(--) SIS(0): VBE DDC monitor info:
(II) SIS(0): Manufacturer: OEC Model: 706 Serial#: 6
(II) SIS(0): Year: 1999 Week: 51
(II) SIS(0): EDID Version: 1.2
(II) SIS(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) SIS(0): Sync: Separate Composite
(II) SIS(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) SIS(0): Gamma: 3.20
(II) SIS(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) SIS(0): redX: 0.625 redY: 0.340 greenX: 0.310 greenY: 0.592
(II) SIS(0): blueX: 0.150 blueY: 0.063 whiteX: 0.281 whiteY: 0.311
(II) SIS(0): Supported VESA Video Modes:
(II) SIS(0): 720x400@70Hz
(II) SIS(0): 720x400@88Hz
(II) SIS(0): 640x480@60Hz
(II) SIS(0): 640x480@67Hz
(II) SIS(0): 640x480@72Hz
(II) SIS(0): 640x480@75Hz
(II) SIS(0): 800x600@56Hz
(II) SIS(0): 800x600@60Hz
(II) SIS(0): 800x600@72Hz
(II) SIS(0): 800x600@75Hz
(II) SIS(0): 832x624@75Hz
(II) SIS(0): 1024x768@87Hz (interlaced)
(II) SIS(0): 1024x768@60Hz
(II) SIS(0): 1024x768@70Hz
(II) SIS(0): 1024x768@75Hz
(II) SIS(0): 1152x870@75Hz
(II) SIS(0): Manufacturer's mask: 0
(II) SIS(0): Supported Future Video Modes:
(II) SIS(0): #0: hsize: 640 vsize 360 refresh: 85 vid: 55601
(II) SIS(0): #1: hsize: 720 vsize 405 refresh: 85 vid: 55611
(II) SIS(0): #3: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) SIS(0): #4: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) SIS(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) SIS(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) SIS(0): #7: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(--) SIS(0): End of VBE DDC monitor info:
(==) SIS(0): Min pixel clock is 12 MHz
(--) SIS(0): Max pixel clock is 175 MHz
(II) SIS(0): Adding mode SIS1280x1024-75 (8, 15 and 16 bpp only)
(II) SIS(0): Scott monitor 772: Using hsync range of 30.00-70.00 kHz
(II) SIS(0): Scott monitor 772: Using vrefresh range of 50.00-150.00 Hz
(II) SIS(0): Clock range: 12.00 to 175.50 MHz
(II) SIS(0): Not using built-in mode "SIS1280x1024-75" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "640x512" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (hsync out of range)
(II) SIS(0): Not using default mode "640x512" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (hsync out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) SIS(0): Not using default mode "896x672" (hsync out of range)
(II) SIS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) SIS(0): Not using default mode "896x672" (hsync out of range)
(II) SIS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) SIS(0): Not using default mode "928x696" (hsync out of range)
(II) SIS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) SIS(0): Not using default mode "928x696" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) SIS(0): Not using default mode "960x720" (hsync out of range)
(II) SIS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) SIS(0): Not using default mode "960x720" (hsync out of range)
(II) SIS(0): Not using default mode "1400x1050" (hsync out of range)
(II) SIS(0): Not using default mode "700x525" (hsync out of range)
(--) SIS(0): Virtual size is 1024x768 (pitch 1024)
(**) SIS(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) SIS(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) SIS(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) SIS(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(--) SIS(0): Display dimensions: (320, 240) mm
(--) SIS(0): DPI set to (81, 81)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) SIS(0): Accel enabled
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xe5000000 - 0xe500ffff (0x10000) MX[B]
[1] 0 0xe6000000 - 0xe67fffff (0x800000) MX[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
[8] -1 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
[9] -1 0xe6000000 - 0xe67fffff (0x800000) MX[B](B)
[10] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[13] 0 0x0000d000 - 0x0000d07f (0x80) IX[B]
[14] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B]
[17] -1 0x0000e800 - 0x0000e81f (0x20) IX[B]
[18] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
[19] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[20] -1 0x0000f000 - 0x0000f00f (0x10) IX[B]
[21] -1 0x0000d000 - 0x0000d07f (0x80) IX[B](B)
[22] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) SIS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xcc80
(==) SIS(0): Write-combining range (0xe6000000,0x400000)
(II) SIS(0): Frame Buffer From (0,0) To (1024,2015)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
10 256x256 slots
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(II) SIS(0): Using SiS5597/5598/6326/530/620 HW Xv
(II) SIS(0): Direct rendering disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
|
Why not provide the /etc/X11/XFree86config as well:
| Code: |
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
# Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "300 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
Option "LeftAlt" "Meta"
Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "se"
# Option "XkbVariant" "se-latin1"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "zAxisMapping" "4 5"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Scott monitor 772"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-70
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-150
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "SiS 6326"
Driver "sis"
#VideoRam 8000
# Option "no_accel" # Use this if acceleration is causing problems
# Option "fifo_moderate"
# Option "fifo_conserv"
# Option "fifo_aggresive"
# Option "fast_vram"
# Option "pci_burst_on"
# Option "xaa_benchmark" # DON'T use with "ext_eng_queue" !!!
# Option "ext_eng_queue" # Turbo-queue. This can cause drawing
# errors, but gives some accel
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "SiS 6326"
Monitor "Scott monitor 772"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768" "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
|
Ok, this is a looong message. But in case some nice person could find something in my configuration, or have any ideas what to look after. I would really appreciate that.
Else it will just be to emerge xfree and kde again I guess. That will take some days....  |
|
| Back to top |
|
 |
chines
Tux's lil' helper
Joined: 22 Nov 2002
Posts: 90
Location: Argentina
|
| Posted: Wed Mar 26, 2003 4:05 pm Post subject: |
|
|
I had problems with the SIS driver, I have to change to an older driver to make my SIS to work, my video card is SIS530, It's older than yours, but maybe you could try with an older SIS driver to see what happends
(Excuse my english) |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
