hdd usb

nikolis · Apprentice Joined: 21 Aug 2003 Posts: 200 Location: Athens

colego il mio disko esterno usb ma il sistema non lo vede.
come faccio a autocaricarlo?

!equilibrium · Posted: Sat Mar 04, 2006 6:01 pm Post subject:

i motivi possono essere molti, ci serve qualche informazioni in più per capire il tuo problema: logs, marca dell'usb ecc ecc
_________________
Arch Tester for Gentoo/FreeBSD
Equilibrium's Universe

all my contents are released under the Creative Commons Licence by-nc-nd 2.5

nikolis · Apprentice Joined: 21 Aug 2003 Posts: 200 Location: Athens

00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)

!equilibrium · Posted: Sat Mar 04, 2006 6:44 pm Post subject:

il kernel è configurato a dovere per quell' hardware USB ?
_________________
Arch Tester for Gentoo/FreeBSD
Equilibrium's Universe

all my contents are released under the Creative Commons Licence by-nc-nd 2.5

Luca89 · Posted: Sat Mar 04, 2006 6:45 pm Post subject:

Posta un output di lsusb e cosa dice dmesg quando attacchi il dispositivo.
_________________
Running Fast!

nikolis · Apprentice Joined: 21 Aug 2003 Posts: 200 Location: Athens

ShuttleX rr4user # lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 046d:c703 Logitech, Inc.
Bus 002 Device 004: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
Bus 001 Device 001: ID 0000:0000
ShuttleX rr4user # lsusb
Bus 005 Device 004: ID 04b4:6830 Cypress Semiconductor Corp. USB-2.0 IDE Adapter
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 046d:c703 Logitech, Inc.
Bus 002 Device 004: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
Bus 001 Device 001: ID 0000:0000
ShuttleX rr4user #

sopra disko spento
sotto disko acceso

ShuttleX rr4user # dmesg
[4294667.296000] Linux version 2.6.15-reiser4-r1 (root@ShuttleX) (gcc version 3.4.5 (Gentoo 3.4.5-r1, ssp-3.4.5-1.0, pie-8.7.9)) #2 SMP PREEMPT Sat Mar 4 21:47:40 CET 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[4294667.296000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[4294667.296000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[4294667.296000] 127MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f4f10
[4294667.296000] On node 0 totalpages: 262128
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 32752 pages, LIFO batch:7
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 XPC ) @ 0x000f90a0
[4294667.296000] ACPI: RSDT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[4294667.296000] ACPI: FADT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff30c0
[4294667.296000] ACPI: MADT (v001 XPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff6bc0
[4294667.296000] ACPI: DSDT (v001 XPC SB71 0x00001000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x408
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:2 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 15:2 APIC version 20
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda3 splash=silent,fadein,theme:default CONSOLE=/dev/tty1 video=vesafb:ywrap,mtrr,1024x768-16@60 quiet irqpoll
[4294667.296000] Misrouted IRQ fixup and polling support enabled
[4294667.296000] This may significantly impact system performance
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 3407.706 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294669.049000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294669.049000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.071000] Memory: 1028408k/1048512k available (4523k kernel code, 19432k reserved, 2082k data, 252k init, 131008k highmem)
[4294669.071000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294669.131000] Calibrating delay using timer specific routine.. 6836.98 BogoMIPS (lpj=3418490)
[4294669.131000] Security Framework v1.0.0 initialized
[4294669.131000] SELinux: Initializing.
[4294669.131000] SELinux: Starting in permissive mode
[4294669.131000] selinux_register_security: Registering secondary module capability
[4294669.131000] Capability LSM initialized as secondary
[4294669.131000] Mount-cache hash table entries: 512
[4294669.131000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294669.131000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294669.131000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294669.131000] CPU: L2 cache: 512K
[4294669.131000] CPU: Physical Processor ID: 0
[4294669.131000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[4294669.131000] Intel machine check architecture supported.
[4294669.131000] Intel machine check reporting enabled on CPU#0.
[4294669.131000] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[4294669.131000] mtrr: v2.0 (20020519)
[4294669.131000] Enabling fast FPU save and restore... done.
[4294669.131000] Enabling unmasked SIMD FPU exception support... done.
[4294669.131000] Checking 'hlt' instruction... OK.
[4294669.149000] CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 09
[4294669.149000] Booting processor 1/1 eip 2000
[4294669.159000] Initializing CPU#1
[4294669.220000] Calibrating delay using timer specific routine.. 6814.53 BogoMIPS (lpj=3407268)
[4294669.220000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294669.220000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[4294669.220000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294669.220000] CPU: L2 cache: 512K
[4294669.220000] CPU: Physical Processor ID: 0
[4294669.220000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
[4294669.220000] Intel machine check architecture supported.
[4294669.220000] Intel machine check reporting enabled on CPU#1.
[4294669.220000] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[4294669.220000] CPU1: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 09
[4294669.220000] Total of 2 processors activated (13651.51 BogoMIPS).
[4294669.220000] ENABLING IO-APIC IRQs
[4294669.220000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294669.331000] checking TSC synchronization across 2 CPUs: passed.
[4294669.332000] Brought up 2 CPUs
[4294669.332000] checking if image is initramfs... it is
[4294669.433000] Freeing initrd memory: 1834k freed
[4294669.434000] NET: Registered protocol family 16
[4294669.434000] ACPI: bus type pci registered
[4294669.446000] PCI: PCI BIOS revision 2.10 entry at 0xfb090, last bus=2
[4294669.446000] PCI: Using configuration type 1
[4294669.446000] ACPI: Subsystem revision 20050902
[4294669.456000] ACPI: Interpreter enabled
[4294669.456000] ACPI: Using IOAPIC for interrupt routing
[4294669.457000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.457000] PCI: Probing PCI hardware (bus 00)
[4294669.459000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[4294669.459000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[4294669.459000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294669.459000] Boot video device is 0000:01:00.0
[4294669.459000] PCI: Transparent bridge - 0000:00:1e.0
[4294669.459000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.466000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[4294669.469000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[4294669.469000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[4294669.470000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[4294669.470000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294669.470000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 *12 14 15)
[4294669.470000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *7 9 10 11 12 14 15)
[4294669.471000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[4294669.471000] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[4294669.471000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.471000] pnp: PnP ACPI init
[4294669.473000] pnp: PnP ACPI: found 9 devices
[4294669.473000] PnPBIOS: Disabled by ACPI PNP
[4294669.473000] SCSI subsystem initialized
[4294669.473000] usbcore: registered new driver usbfs
[4294669.473000] usbcore: registered new driver hub
[4294669.473000] PCI: Using ACPI for IRQ routing
[4294669.473000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294669.490000] TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
[4294669.490000] pnp: 00:06: ioport range 0x400-0x4bf could not be reserved
[4294669.490000] PCI: Bridge: 0000:00:01.0
[4294669.490000] IO window: disabled.
[4294669.490000] MEM window: f4000000-f5ffffff
[4294669.490000] PREFETCH window: f0000000-f3ffffff
[4294669.490000] PCI: Bridge: 0000:00:1e.0
[4294669.490000] IO window: d000-dfff
[4294669.490000] MEM window: f6000000-f60fffff
[4294669.490000] PREFETCH window: 50000000-500fffff
[4294669.490000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294669.490000] Machine check exception polling timer started.
[4294669.493000] audit: initializing netlink socket (disabled)
[4294669.493000] audit(1141509314.491:1): initialized
[4294669.493000] highmem bounce pool size: 64 pages
[4294669.493000] Total HugeTLB memory allocated, 0
[4294669.493000] VFS: Disk quotas dquot_6.5.1
[4294669.493000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.493000] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[4294669.493000] Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
[4294669.493000] Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu
[4294669.493000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[4294669.493000] NTFS driver 2.1.25 [Flags: R/W].
[4294669.493000] QNX4 filesystem 0.2.3 registered.
[4294669.493000] JFS: nTxBlock = 8051, nTxLock = 64408
[4294669.497000] SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
[4294669.497000] SGI XFS Quota Management subsystem
[4294669.497000] SELinux: Registering netfilter hooks
[4294669.506000] Initializing Cryptographic API
[4294669.506000] io scheduler noop registered
[4294669.506000] io scheduler anticipatory registered
[4294669.506000] io scheduler deadline registered
[4294669.506000] io scheduler cfq registered
[4294669.508000] Real Time Clock Driver v1.12
[4294669.508000] Linux agpgart interface v0.101 (c) Dave Jones
[4294669.508000] agpgart: Detected an Intel i875 Chipset.
[4294669.516000] agpgart: AGP aperture is 256M @ 0xe0000000
[4294669.516000] vesafb: unrecognized option mtrr
[4294669.529000] vesafb: NVIDIA Corporation, NV28 Board, Chip Rev A0 (OEM: NVIDIA)
[4294669.529000] vesafb: VBE version: 3.0
[4294669.557000] vesafb: protected mode interface info at c000:e740
[4294669.557000] vesafb: pmi: set display start = c00ce785, set palette = c00ce80a
[4294669.557000] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
[4294669.560000] vesafb: VBIOS/hardware supports DDC2 transfers
[4294669.619000] vesafb: monitor limits: vf = 75 Hz, hf = 81 kHz, clk = 140 MHz
[4294669.619000] vesafb: scrolling: ywrap using protected mode interface, yres_virtual=5120
[4294669.807000] Console: switching to colour frame buffer device 128x48
[4294669.809000] fbsplash: console 0 using theme 'default'
[4294669.932000] fbsplash: switched splash state to 'on' on console 0
[4294669.932000] vesafb: framebuffer at 0xf0000000, mapped to 0xf8d80000, using 10240k, total 65536k
[4294669.932000] fb0: VESA VGA frame buffer device
[4294669.933000] ACPI: Power Button (FF) [PWRF]
[4294669.933000] ACPI: Power Button (CM) [PWRB]
[4294669.933000] ACPI: Fan [FAN] (on)
[4294669.933000] Using specific hotkey driver
[4294669.939000] ACPI: Thermal Zone [THRM] (44 C)
[4294669.939000] isapnp: Scanning for PnP cards...
[4294670.252000] isapnp: No Plug & Play device found
[4294670.252000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[4294670.252000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[4294670.255000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.255000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.255000] mice: PS/2 mouse device common for all mice
[4294670.255000] ts: Compaq touchscreen protocol output
[4294670.255000] logibm.c: Didn't find Logitech busmouse at 0x23c
[4294670.256000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[4294670.256000] pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
[4294670.256000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.256000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294670.256000] ICH5: IDE controller at PCI slot 0000:00:1f.1
[4294670.256000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
[4294670.256000] ICH5: chipset revision 2
[4294670.256000] ICH5: not 100% native mode: will probe irqs later
[4294670.256000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
[4294670.256000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
[4294670.256000] Probing IDE interface ide0...
[4294670.521000] hda: WDC WD2500JB-00FUA0, ATA DISK drive
[4294670.544000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294671.135000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294671.135000] Probing IDE interface ide1...
[4294671.808000] hdc: PLEXTOR DVDR PX-716AL, ATAPI CD/DVD-ROM drive
[4294672.115000] ide1 at 0x170-0x177,0x376 on irq 15
[4294672.115000] hda: max request size: 1024KiB
[4294672.118000] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
[4294672.119000] hda: cache flushes supported
[4294672.119000] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
[4294672.191000] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
[4294672.191000] Uniform CD-ROM driver Revision: 3.20
[4294672.193000] NCR53c406a: no available ports found
[4294672.193000] sym53c416.c: Version 1.0.0-ac
[4294672.193000] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver
[4294672.193000] Emulex LightPulse Fibre Channel SCSI driver 8.1.0
[4294672.193000] Copyright(c) 2004-2005 Emulex. All rights reserved.
[4294672.193000] GDT-HA: Storage RAID Controller Driver. Version: 3.04
[4294672.193000] GDT-HA: Found 0 PCI Storage RAID Controllers
[4294672.193000] nsp32: loading...
[4294672.194000] libata version 1.20 loaded.
[4294672.194000] osst :I: Tape driver with OnStream support version 0.99.3
[4294672.194000] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[4294672.194000] ieee1394: Initialized config rom entry `ip1394'
[4294672.194000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294672.194000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 16
[4294672.194000] PCI: Via IRQ fixup for 0000:02:06.0, from 5 to 0
[4294672.247000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f6024000-f60247ff] Max Packet=[2048]
[4294672.254000] ACPI: PCI Interrupt 0000:02:08.2[B] -> GSI 21 (level, low) -> IRQ 17
[4294672.306000] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f6025000-f60257ff] Max Packet=[2048]
[4294672.309000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[4294672.309000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294672.309000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294672.309000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294672.309000] USB Universal Host Controller Interface driver v2.3
[4294672.309000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
[4294672.309000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294672.309000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294672.309000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294672.309000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e300
[4294672.309000] hub 1-0:1.0: USB hub found
[4294672.309000] hub 1-0:1.0: 2 ports detected
[4294672.411000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[4294672.411000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294672.411000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294672.411000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294672.411000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
[4294672.411000] hub 2-0:1.0: USB hub found
[4294672.411000] hub 2-0:1.0: 2 ports detected
[4294672.512000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
[4294672.513000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294672.513000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294672.513000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294672.513000] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000e100
[4294672.513000] hub 3-0:1.0: USB hub found
[4294672.513000] hub 3-0:1.0: 2 ports detected
[4294672.614000] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 18
[4294672.614000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294672.614000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294672.615000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294672.615000] uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000e200
[4294672.615000] hub 4-0:1.0: USB hub found
[4294672.615000] hub 4-0:1.0: 2 ports detected
[4294672.616000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[4294672.716000] Initializing USB Mass Storage driver...
[4294672.783000] usbcore: registered new driver usb-storage
[4294672.783000] USB Mass Storage support registered.
[4294672.989000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[4294673.121000] hub 2-1:1.0: USB hub found
[4294673.123000] hub 2-1:1.0: 2 ports detected
[4294673.230000] usbcore: registered new driver hiddev
[4294673.406000] usb 2-1.1: new low speed USB device using uhci_hcd and address 3
[4294673.513000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00301bb100007876]
[4294673.564000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
[4294673.564000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
[4294673.591000] input: Logitech USB Receiver as /class/input/input2
[4294673.591000] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.1
[4294673.652000] input: Logitech USB Receiver as /class/input/input3
[4294673.652000] input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.1
[4294673.652000] usbcore: registered new driver usbhid
[4294673.652000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294673.652000] Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
[4294673.652000] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294673.679000] ALSA device list:
[4294673.679000] #0: Audigy 1 [SB0090] (rev.3, serial:0x531102) at 0xd100, irq 20
[4294673.679000] NET: Registered protocol family 2
[4294673.688000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294673.689000] TCP established hash table entries: 262144 (order: 9, 3145728 bytes)
[4294673.691000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[4294673.691000] TCP: Hash tables configured (established 262144 bind 65536)
[4294673.691000] TCP reno registered
[4294673.691000] arp_tables: (C) 2002 David S. Miller
[4294673.700000] TCP bic registered
[4294673.700000] NET: Registered protocol family 1
[4294673.700000] NET: Registered protocol family 17
[4294673.701000] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[4294673.701000] Starting balanced_irq
[4294673.701000] Using IPI Shortcut mode
[4294673.701000] Freeing unused kernel memory: 252k freed
[4294673.770000] ieee1394: Host added: ID:BUS[1-00:1023] GUID[00023c0030016cd9]
[4294675.792000] ehci_hcd: version magic '2.6.15-reiser4-r1-nosmp preempt 486 gcc-3.4' should be '2.6.15-reiser4-r1 SMP preempt PENTIUM4 gcc-3.4'
[4294675.821000] uhci_hcd: version magic '2.6.15-reiser4-r1-nosmp preempt 486 gcc-3.4' should be '2.6.15-reiser4-r1 SMP preempt PENTIUM4 gcc-3.4'
[4294675.836000] ohci_hcd: version magic '2.6.15-reiser4-r1-nosmp preempt 486 gcc-3.4' should be '2.6.15-reiser4-r1 SMP preempt PENTIUM4 gcc-3.4'
[4294675.855000] sl811_hcd: version magic '2.6.15-reiser4-r1-nosmp preempt 486 gcc-3.4' should be '2.6.15-reiser4-r1 SMP preempt PENTIUM4 gcc-3.4'
[4294676.330000] ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda3
[4294683.290000] hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
[4294683.290000] cdrom: open failed.
[4294683.798000] Adding 2056312k swap on /dev/hda2. Priority:-1 extents:1 across:2056312k
[4294691.007000] kjournald starting. Commit interval 5 seconds
[4294691.008000] EXT3 FS on hda1, internal journal
[4294691.008000] EXT3-fs: mounted filesystem with ordered data mode.
[4294702.354000] cdrom: open failed.
[4294702.355000] cdrom: open failed.
[4294708.228000] cdrom: open failed.
[4294709.681000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
[4294709.681000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294709.681000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294709.681000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294709.681000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294709.681000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf6100000
[4294709.685000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294709.686000] hub 5-0:1.0: USB hub found
[4294709.686000] hub 5-0:1.0: 8 ports detected
[4294709.763000] usb 2-1: USB disconnect, address 2
[4294709.763000] usb 2-1.1: USB disconnect, address 3
[4294710.179000] usb 1-2: USB disconnect, address 2
[4294710.385000] usb 1-2: new low speed USB device using uhci_hcd and address 3
[4294710.570000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
[4294710.571000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
[4294710.655000] hw_random: RNG not detected
[4294710.777000] usb 2-1: new full speed USB device using uhci_hcd and address 4
[4294710.906000] hub 2-1:1.0: USB hub found
[4294710.908000] hub 2-1:1.0: 2 ports detected
[4294711.185000] usb 2-1.1: new low speed USB device using uhci_hcd and address 5
[4294711.346000] input: Logitech USB Receiver as /class/input/input5
[4294711.346000] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.1
[4294711.407000] input: Logitech USB Receiver as /class/input/input6
[4294711.407000] input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.1
[4294711.467000] nvidia: module license 'NVIDIA' taints kernel.
[4294711.472000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
[4294711.473000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005
[4294711.887000] tg3.c:v3.47 (Dec 28, 2005)
[4294711.887000] ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 19
[4294711.911000] eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:30:1b:b2:78:12
[4294711.911000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
[4294711.911000] eth0: dma_rwctrl[763f0000]
[4294712.116000] gameport: EMU10K1 is pci0000:02:08.1/gameport0, io 0xd200, speed 1217kHz
[4294725.914000] Bridge firewalling registered
[4294727.340000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[4294727.340000] tg3: eth0: Flow control is off for TX and off for RX.
[4294739.849000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294739.849000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294739.849000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[4294740.302000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294740.302000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294740.302000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[4294828.271000] hdc: cdrom_pc_intr: The drive appears confused (ireason = 0x01)

nikolis · Apprentice Joined: 21 Aug 2003 Posts: 200 Location: Athens

fstab

/dev/hda1 /boot ext3 defaults 1 2
/dev/hda2 none swap sw 0 0
/dev/hda3 / reiser4 defaults 0 1
/dev/hda5 /home reiser4 defaults 0 0
/dev/hda6 /foto reiser4 defaults 0 0
/dev/hda7 /mp3 reiser4 defaults 0 0
/dev/hda8 /video reiser4 defaults 0 0
/dev/hdc /mnt/cdrom auto auto,user,rw
none /proc proc defaults 0 0
none /dev/shm tmpfs defaults 0 0