| View previous topic :: View next topic |
| Author |
Message |
picklestix
n00b
Joined: 15 Jan 2005
Posts: 72
|
 Posted: Mon Mar 06, 2006 8:03 am Post subject: Mplayer / alsa problem [solved] |
 |
|
I'm running ~amd64, when playing back any video file with mplayer I get about 1 second of video playback before it hangs. Errors are thrown out
| Code: | alsa-play: write error: Broken Pipe0.000\
alsa-play: trying to reset soundcard |
I'm not running esd or arts, just running mplayer from terminal in fluxbox.
Mplayer-bin plays back fine.
Last edited by picklestix on Wed Mar 08, 2006 11:20 pm; edited 1 time in total |
|
| Back to top |
|
 |
jrich013
n00b
Joined: 07 Mar 2006
Posts: 2
|
| Posted: Tue Mar 07, 2006 10:03 pm Post subject: |
|
|
I have the exact same problem. It just recently started happening to me. mplayer-bin also produces these same errors.
This is the output I get from one video,
| Code: |
AVI file format detected.
VIDEO: [XVID] 512x384 12bpp 29.970 fps 932.0 kbps (113.8 kbyte/s)
Clip info:
Software: VirtualDubMod 1.5.10.1 (build 2366/release)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
alsa-init: 1 soundcard found, using: default
alsa: 44100 Hz/2 channels/4 bpf/60208 bytes buffer/Signed 16 bit Little Endian
AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 512 x 384 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 512x384 => 512x384 Planar YV12
alsa-play: trying to reset soundcard.000 1/ 1 ??% ??% ??,?% 0 0
alsa-play: trying to reset soundcard.003 2/ 2 ??% ??% ??,?% 1 0
alsa-play: trying to reset soundcard.027 9/ 9 ??% ??% ??,?% 6 0
alsa-play: trying to reset soundcard.050 16/ 16 19% 2% 1.7% 12 0
alsa-play: trying to reset soundcard.070 22/ 22 16% 2% 1.6% 18 0
alsa-play: trying to reset soundcard.083 26/ 26 14% 2% 1.7% 22 0
alsa-play: trying to reset soundcard.097 30/ 30 12% 2% 1.8% 26 0
alsa-play: trying to reset soundcard.110 34/ 34 12% 2% 1.8% 30 0
alsa-play: trying to reset soundcard.130 40/ 40 11% 2% 1.7% 36 0
alsa-play: trying to reset soundcard.153 47/ 47 10% 2% 1.6% 43 0
|
Whereas another video works perfectly,
| Code: |
AVI file format detected.
VIDEO: [XVID] 512x384 12bpp 29.970 fps 934.5 kbps (114.1 kbyte/s)
Clip info:
Software: VirtualDubMod 1.5.10.1 (build 2366/release)
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
alsa-init: 1 soundcard found, using: default
alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little Endian
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 512 x 384 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
VO: [xv] 512x384 => 512x384 Planar YV12
A: 41.3 V: 41.3 A-V: -0.010 ct: -0.002 1239/1239 6% 0% 0.9% 0 0
|
|
|
| Back to top |
|
|
picklestix
n00b
Joined: 15 Jan 2005
Posts: 72
|
| Posted: Tue Mar 07, 2006 10:13 pm Post subject: |
|
|
I seem to have the issue with anything I can throw at mplayer. In each instance though, mplayer bin works fine.
Here's my mplayer output.
| Code: | AVI file format detected.
VIDEO: [MJPG] 320x240 24bpp 15.000 fps 2565.3 kbps (313.2 kbyte/s)
Clip info:
Digitization Time: Tue Dec 21 10:52:23 2004
Software: CanonMVI01
==========================================================================
Opening audio decoder: [pcm] Uncompressed PCM audio decoder
AUDIO: 11024 Hz, 1 ch, u8, 88.2 kbit/100.00% (ratio: 11024->11024)
Selected audio codec: [pcm] afm: pcm (Uncompressed PCM)
==========================================================================
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffmjpeg] vfm: ffmpeg (FFmpeg MJPEG decoder)
==========================================================================
alsa-init: 1 soundcard found, using: default
alsa: 11024 Hz/1 channels/1 bpf/3762 bytes buffer/Unsigned 8 bit
AO: [alsa] 11024Hz 1ch u8 (1 bytes per sample)
Starting playback...
VDec: vo config request - 320 x 240 (preferred colorspace: Planar 422P)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
VDec: using Planar 422P as output csp (no 1)
Movie-Aspect is undefined - no prescaling applied.
SwScaler: BICUBIC scaler, from Planar 422P to Planar YV12 using MMX2
VO: [xv] 320x240 => 320x240 Planar YV12
alsa-play: write error: Broken pipe0.000 1/ 1 ??% ??% ??,?% 0 0
alsa-play: trying to reset soundcard
A: 0.3 V: 0.5 A-V: -0.192 ct: 0.015 9/ 9 12% 3% 2.2% 2 0
MPlayer interrupted by signal 13 in module: vo_check_events
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
X connection to :0.0 broken (explicit kill or server shutdown).
|
Playback will either happen very quickly, and end with a long chain of the alsa-play errors, or it will hang after a few frames as in the case above.
emerge info: | Code: |
Portage 2.1_pre5-r4 (default-linux/amd64/2006.0, gcc-3.4.5, glibc-2.3.6-r3, 2.6.15-gentoo-r7 x86_64)
=================================================================
System uname: 2.6.15-gentoo-r7 x86_64 AMD Athlon(tm) 64 Processor 3400+
Gentoo Base System version 1.12.0_pre16
ccache version 2.4 [enabled]
dev-lang/python: 2.3.5, 2.4.2-r1
sys-apps/sandbox: 1.2.17
sys-devel/autoconf: 2.13, 2.59-r7
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r1
sys-devel/binutils: 2.16.1-r2
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.11-r3
ACCEPT_KEYWORDS="amd64 ~amd64"
AUTOCLEAN="yes"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=k8 -pipe -O2"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5 /shutdown /usr/kde/3/share/config /usr/lib/X11/xkb /usr/share/config /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/gconf /etc/splash /etc/terminfo /etc/env.d"
CXXFLAGS="-O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig ccache distlocks parallel-fetch sandbox sfperms strict"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo "
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="amd64 X a52 aac acpi alsa avi bash-completion berkdb bitmap-fonts browserplugin bzip2 cddb cdpa ranoia cdr crypt cups dbus dga dhcp dio directfb divx4linux dri dts dv dvd dvdr dvdread dvr3 eds emb oss encode exif fbcon fbsplash ffmpeg firefox flash foomaticdb fortran gd gdbm ggi gif gimpprint gph oto2 gpm gstreamer gtk2 howl icq ieee1394 imlib innodb jabber jack java javascript jpeg jpeg2k kdeen ablefinal kqemu lcms libwww live lm_sensors logitech-mouse lzo lzw lzw-tiff mad mikmod mime mjpeg mp 3 mpeg mplayer mppe-mppc musepack musicbrainz ncurses network nptl nptlonly nsplugin nvidia odbc off ensive ogg oggvorbis opengl pdflib perl pic png ppds python quicktime rdesktop readline real rtc sam ba scanner sdk sdl skey slp spell ssl symlink szip tcpd theora threads tiff truetype truetype-fonts type1-fonts usb userlocales v4l vcd vim-with-x visualization vorbis wifi xcomposite xine xml xml2 xp m xv xvid zlib elibc_glibc kernel_linux userland_GNU video_cards_nvidia"
Unset: ASFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, LANG, LC_ALL, LDFLAGS, LINGUAS
|
And mplayer build info
| Code: |
[ebuild R ] media-video/mplayer-1.0.20060302 USE="X aac alsa cdparanoia dga directfb dts dv dvd dvdread encode fbcon ggi gif jack jpeg live lzo mad musepack nvidia opengl png real rtc samba sdl theora truetype v4l vorbis xv xvid -aalib -arts -bidi -bindist -bl -cpudetection -custom-cflags -debug -doc -dvb -edl -esd -gtk -i8x0 -ipv6 -joystick -libcaca -lirc -livecd -matroska -matrox -nas -nls -openal -oss -tga -v4l2 -x264 -xanim -xinerama -xmms -xvmc" 7,219 kB
|
Sound works fine in everything else.... |
|
| Back to top |
|
|
bladus
Apprentice
Joined: 27 Jul 2005
Posts: 233
|
| Posted: Wed Mar 08, 2006 11:09 am Post subject: |
|
|
| I'm running mplayer-cvs and have the same problem, a few videos are working and a few throw a "alsa-play: Broken Pipe" Error |
|
| Back to top |
|
|
butane317
n00b
Joined: 26 Jan 2006
Posts: 55
|
| Posted: Wed Mar 08, 2006 3:17 pm Post subject: |
|
|
I have a problem with mplayer and alsa as well. It simply will not play anything. It freezes at
| Code: |
Starting playback...
A: 0.0 (unknown) of 285.0 (04:45.0) ??,?% |
and I have to Ctrl-C to kill it. Using the "ao sdl" flag on the command line makes it work fine. Everything else using alsa works fine. This just started happening a while ago. |
|
| Back to top |
|
|
mister.woody
n00b
Joined: 01 Feb 2006
Posts: 27
|
| Posted: Wed Mar 08, 2006 11:13 pm Post subject: |
|
|
| butane317 wrote: | I have a problem with mplayer and alsa as well. It simply will not play anything. It freezes at
| Code: |
Starting playback...
A: 0.0 (unknown) of 285.0 (04:45.0) ??,?% |
and I have to Ctrl-C to kill it. Using the "ao sdl" flag on the command line makes it work fine. Everything else using alsa works fine. This just started happening a while ago. |
Did you guys notice this:
https://bugs.gentoo.org/show_bug.cgi?id=123841
? |
|
| Back to top |
|
|
picklestix
n00b
Joined: 15 Jan 2005
Posts: 72
|
| Posted: Wed Mar 08, 2006 11:20 pm Post subject: |
|
|
| Thanks, I didn't find that one. Works now temporarily. |
|
| Back to top |
|
|
tux2
Apprentice
Joined: 09 Jun 2004
Posts: 172
Location: Germany
|
| Posted: Wed Mar 08, 2006 11:35 pm Post subject: |
|
|
Yes, this works for me, too thanks
but only with mplayer not with mplayer-bin
sound-device:
| Code: | 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
|
|
|
| Back to top |
|
|
zxy
Veteran
Joined: 06 Jan 2006
Posts: 1160
Location: in bed in front of the computer
|
| Posted: Sat Mar 25, 2006 4:46 pm Post subject: |
|
|
Try using sdl audio.
| Code: | | mplayer movie.avi -ao sdl |
It works every time. But alsa is mostly making problems lately. But some months ago it was ok. I don't know the solution with alsa. |
|
| Back to top |
|
|
shibuya
n00b
Joined: 25 Mar 2006
Posts: 6
|
| Posted: Sun Mar 26, 2006 5:02 pm Post subject: |
|
|
| zxy wrote: | Try using sdl audio.
It works every time. But alsa is mostly making problems lately. But some months ago it was ok. I don't know the solution with alsa. |
I had some of that problems (broken pipe, PCMs,x...) finally resolved setting device and mixer-channel mplayer's options. Now I'am using mplayer 1.0.20060302 with alsa happyly... 
Extract from my /etc/mplayer.conf
#################
# audio settings #
##################
ao=alsa:device=hw=0.0
mixer-channel="Analog Front"
#use alsamixer (for example) to know your mixer-channel |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Gentoo on AMD64
