| View previous topic :: View next topic |
| Author |
Message |
cheater1034
Veteran
Joined: 09 Sep 2004
Posts: 1558
|
 Posted: Fri Mar 10, 2006 3:39 am Post subject: 2.6.16-rc5-no2 "Rock like Ninja"|(All Of -mm)(Susp |
 |
|
Part of conrad projects
Now Based COMPLETELY off of -mm!
This release status:unstable - Reason: -rc* release
2.6.16_rc5-no2"Rock like Ninja"
What is it?
No-Sources is a patchset completely based off of Andrew Mortons -mm kernel. It includes a lot of additional patches that users demand and want, and it includes some performance based patches, as well as -ck patches. It also includes a custom modified suspend2 patch to work with -mm.
-----
SUPPORT
IRC: #no-sources (at FreeNode)
Otherwise, post in this thread
Please do not bug the gentoo devs with any problems from no-sources! cheater-conrad/joecool would much rather hear the problem 
-----
[_CPUSCHED_]
(Default = Ingosched)
| Code: | { There are 9 available cpu scheduler you can choose from , either from the kernel config or by using cpusched="nicksched" in /boot/grub/grub.conf
(assuming you are using grub) as a kernel parameter.
Available options are:
cpusched="nicksched"
cpusched="staircase"
cpusched="zaphod"
cpusched="spa_no_frills"
cpusched="spa_ws"
cpusched="spa_svr"
cpusched="spa_ebs)"
cpusched="ingosched"
cpusched="ingo_ll" (low latency)
} |
-----
NICKSCHED TIMESLICE
The nicksched timeslice is set statically in the code to 128, it is very easy to change, it can be changed by editing.
kernel/nicksched.c
Just search for 128 (only 1 entry) and change it to what you wish.
-----
Patches: -->
NOTES (Detailed patchlist): http://no.oldos.org/files/2.6.16-rc5-no1/Notes.txt
| Code: |
/* patch-2.6.16_rc5.bz2
--> Prepatch to the stable linux kernel.
/* 2.6.16-rc5-mm3.bz2
--> Andrew Morton's -mm patchset patch.
/* 2.6.16-rc5-mm3 HotFixes
--> revert-x86_64-mm-i386-early-alignment.patch
/* Patches from previous -MM releases
1> 2.6.16-rc2-mm1
--> lxdialog-sane-colours.patch
/* 01_suspend2-hacked-for-2.6.16_rc5-mm3.patch
--> Suspend2 (2.2.0.1)
NOTE: This patch needed severe editing and hacking to work properly.
/* 02_plugsched-6.3.1-for-2.6.16_rc5-mm2.patch
--> The latest plugsched (6.3.1) for the -mm patchset
/* 03_vesafb-tng-1.0-rc1-r3-2.6.15-rc1.patch
--> The latest vesafb-tng patch from spock
/* 04_fbsplash-0.9.2-r5-2.6.16-rc2.patch
--> The latest FBSPLASH kernel patch from spock, enables support for the gensplash FBSplash
/* 05_patches-from-2.6.16_rc5-ck1.patch
--> A few patches from the -CK patchset
LIST:
--- pdflush-tweaks.patch
--- vm-lots_watermark.diff
--- vm_mapped-1.diff
--- hz-default-values.diff
--- hz-no_default-250.diff
/* 06_daconfig.patch
--> Cool script to show the name of the kernel in menuconfig
/* 07_bdz_undervolt.2006.01.07.patch
--> Pentium-M/Centrino undervolting and underclocking
/* 08_kernel-layer7-2.1.patch
--> IPFilter Layer7 Support
/* 09_ibm-fancontrol.patch
--> IBM Thinkpad fancontrol patch
/* 10_squashfs-2.2.patch
--> Squashfs-2.2-r2 support
/* 11_unionfs-20060223-converted-mutex.patch
--> UnionFS support, converted to a mutex for compatibility with sem2mutex patches in -mm
/* 12_config-nr-tty-devices.patch
--> Configure the number of tty devices you want in the kernel config
/* 13_usbhid-readd-kconfig.patch
--> USB Mouse Polling support
/* 14_realtime-lsm.patch
--> The realtime linux security module
/* x86_64-time.c-fix.patch --- THANKS Tiger683
--> Fixes the x86_64 time.c "get_cmos_time" function by changing it to "__get_cmos_time"
|
-----
Suspend2 Patch
Could someone be so kind as to test suspend2 for me on this release? I had to do very severe editing to the patch, and was successful, because it builds, but I do not know if it actually works. Thanks! 
-----
DOWNLOADS:
EBUILD
PATCH
BROKEN-OUT
DETAILED PATCHLIST
-----
MINI-HOWTO
GENTOO:
# nano /etc/make.conf
<set PORTDIR_OVERLAY="/usr/local/portage", in make.conf, unless already set>
# wget http://no.oldos.org/files/2.6.16-rc5-no2/no-sources-2.6.16_rc5-r2.ebuild
# mkdir -p /usr/local/portage/sys-kernel/no-sources
# mv no-sources-2.6.16_rc5-r2.ebuild /usr/local/portage/sys-kernel/no-sources
# ebuild /usr/local/portage/sys-kernel/no-sources/no-sources-2.6.16_rc5-r2.ebuild digest
<ALL users running stable x86 do the following step>
# echo sys-kernel/no-sources ~x86 >> /etc/portage/package.keywords
Then emerge the beast:
# emerge no-sources
OTHER DISTROS:
# cd /usr/src
# rm linux
# wget http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.15.tar.bz2
# wget http://no.oldos.org/files/2.6.16-rc5-no2/2.6.16-rc5-no2.bz2
# wget http://www.kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.16-rc5.bz2
# wget http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc5/2.6.16-rc5-mm3/2.6.16-rc5-mm3.bz2
# tar jxvf linux-2.6.15.tar.bz2
# ln -s linux-2.6.15 linux
# cd linux
# bzcat /usr/src/patch-2.6.16-rc5.bz2 | patch -p1
# bzcat /usr/src/2.6.16-rc5-mm3.bz2 | patch -p1
# bzcat /usr/src/2.6.16-rc5-no2.bz2 | patch -p1
_________________
IRC!: #zen-sources on irc.rizon.net
zen-kernel.org
--
Lost in android development land.
Last edited by cheater1034 on Fri Mar 10, 2006 10:14 pm; edited 2 times in total |
|
| Back to top |
|
 |
Archangel1
Veteran
Joined: 21 Apr 2004
Posts: 1212
Location: Work
|
| Posted: Fri Mar 10, 2006 4:23 am Post subject: |
|
|
Am just about to take it for a spin.
Just a minor tweak: In your first wget line, you've got -rc4- instead of -rc5-
_________________
What are you, stupid? |
|
| Back to top |
|
|
Archangel1
Veteran
Joined: 21 Apr 2004
Posts: 1212
Location: Work
|
| Posted: Fri Mar 10, 2006 5:05 am Post subject: |
|
|
It's got a nasty compile error in arch/x86_64/kernel/time.c; there are two different versions of get_cmos_time() in it.
I've backed out the suspend2 patch, and it seems to be compiling fine so far. I'm not quite sure if there's a better solution though - just commenting out the 'new' get_cmos_time didn't work particularly well.
_________________
What are you, stupid? |
|
| Back to top |
|
|
deluge
Apprentice
Joined: 28 Jan 2004
Posts: 157
|
| Posted: Fri Mar 10, 2006 7:44 am Post subject: |
|
|
Same here:
| Code: | arch/x86_64/kernel/time.c: In function âget_cmos_timeâ:
arch/x86_64/kernel/time.c:509: warning: unused variable âflagsâ
arch/x86_64/kernel/time.c: At top level:
arch/x86_64/kernel/time.c:570: error: redefinition of âget_cmos_timeâ
arch/x86_64/kernel/time.c:506: error: previous definition of âget_cmos_timeâ was here
arch/x86_64/kernel/time.c: In function âget_cmos_timeâ:
arch/x86_64/kernel/time.c:576: warning: implicit declaration of function â__get_cmos_timeâ
make[1]: *** [arch/x86_64/kernel/time.o] BÅÄ
|
|
|
| Back to top |
|
|
mbar
Veteran
Joined: 19 Jan 2005
Posts: 1990
Location: Poland
|
| Posted: Fri Mar 10, 2006 8:31 am Post subject: Re: 2.6.16-rc5-no1 "Turning Point"|(All Of -mm)(Su |
|
|
| cheater1034 wrote: | Could someone be so kind as to test suspend2 for me on this release? I had to do very severe editing to the patch, and was successful, because it builds, but I do not know if it actually works. Thanks!
|
I'm goint to try that when I get home in the evening, I have a laptop with 2.6.16_rc4-no1 and suspend2 works there. |
|
| Back to top |
|
|
Tiger683
Veteran
Joined: 08 Jan 2005
Posts: 1347
Location: Heffner's House
|
| Posted: Fri Mar 10, 2006 8:49 am Post subject: |
|
|
| Archangel1 wrote: | It's got a nasty compile error in arch/x86_64/kernel/time.c; there are two different versions of get_cmos_time() in it.
I've backed out the suspend2 patch, and it seems to be compiling fine so far. I'm not quite sure if there's a better solution though - just commenting out the 'new' get_cmos_time didn't work particularly well. |
| deluge wrote: | Same here: ....
|
This should help (damn, I'm already fixing other people's patchsets  )
| Code: |
--- arch/x86_64/kernel/time.c 2006-03-10 09:43:47.043333296 +0100
+++ arch/x86_64/kernel/time.c.new 2006-03-10 09:46:33.504027424 +0100
@@ -502,7 +502,7 @@
return cycles_2_ns(a);
}
-static unsigned long get_cmos_time(void)
+static unsigned long __get_cmos_time(void)
{
unsigned int timeout = 1000000, year, mon, day, hour, min, sec;
unsigned char uip = 0, this = 0;
|
_________________
Retired gentoo user |
|
| Back to top |
|
|
cheater1034
Veteran
Joined: 09 Sep 2004
Posts: 1558
|
| Posted: Fri Mar 10, 2006 12:54 pm Post subject: |
|
|
heh thanks tiger
I did not get any chance to test it out on x86_64, only standard x86. (I don't install 64-bit gentoo)
I will put the patch in the main post when I get home
----
Though I don't know if I'd say you are fixing the patchset
_________________
IRC!: #zen-sources on irc.rizon.net
zen-kernel.org
--
Lost in android development land.
Last edited by cheater1034 on Fri Mar 10, 2006 8:58 pm; edited 1 time in total |
|
| Back to top |
|
|
bigbob73
Guru
Joined: 31 Dec 2004
Posts: 332
Location: Under the Lone Star
|
| Posted: Fri Mar 10, 2006 4:51 pm Post subject: |
|
|
cheater,
still getting the same compile error. I have nothing selected for power management.
mauller linux # make && make modules_install
CHK include/linux/version.h
scripts/kconfig/conf -s arch/i386/Kconfig
#
# using defaults found in .config
#
SPLIT include/linux/autoconf.h -> include/config/*
CC arch/i386/kernel/asm-offsets.s
In file included from arch/i386/kernel/asm-offsets.c:10:
include/linux/suspend.h:62: error: redefinition of 'freeze_processes'
include/linux/sched.h:1458: error: previous definition of 'freeze_processes' was here
include/linux/suspend.h:63: error: redefinition of 'thaw_processes'
include/linux/sched.h:1459: error: previous definition of 'thaw_processes' was here
make[1]: *** [arch/i386/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
bigbob
_________________
A computers attention span is only as long as it's electrical cord (Murphy) |
|
| Back to top |
|
|
deluge
Apprentice
Joined: 28 Jan 2004
Posts: 157
|
| Posted: Fri Mar 10, 2006 4:58 pm Post subject: |
|
|
| Patch works, great. THX |
|
| Back to top |
|
|
cheater1034
Veteran
Joined: 09 Sep 2004
Posts: 1558
|
| Posted: Fri Mar 10, 2006 7:41 pm Post subject: |
|
|
| bigbob73 wrote: | cheater,
still getting the same compile error. I have nothing selected for power management.
mauller linux # make && make modules_install
CHK include/linux/version.h
scripts/kconfig/conf -s arch/i386/Kconfig
#
# using defaults found in .config
#
SPLIT include/linux/autoconf.h -> include/config/*
CC arch/i386/kernel/asm-offsets.s
In file included from arch/i386/kernel/asm-offsets.c:10:
include/linux/suspend.h:62: error: redefinition of 'freeze_processes'
include/linux/sched.h:1458: error: previous definition of 'freeze_processes' was here
include/linux/suspend.h:63: error: redefinition of 'thaw_processes'
include/linux/sched.h:1459: error: previous definition of 'thaw_processes' was here
make[1]: *** [arch/i386/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
bigbob |
Hmm, how I have not seen that in any other case. I would try the config with a different kernel and see if it persists (ie vanilla-sources), if it does not persist, then I will track it further
_________________
IRC!: #zen-sources on irc.rizon.net
zen-kernel.org
--
Lost in android development land. |
|
| Back to top |
|
|
cheater1034
Veteran
Joined: 09 Sep 2004
Posts: 1558
|
| Posted: Fri Mar 10, 2006 8:09 pm Post subject: |
|
|
ok, going to release 2.6.16-rc5-no2 in a few minutes, just a hotfix with tiger's found problem (thanks again tiger) and the default timer frequencies will be changed to that of ck (i.e. the hz-* -ck patches)
_________________
IRC!: #zen-sources on irc.rizon.net
zen-kernel.org
--
Lost in android development land. |
|
| Back to top |
|
|
cheater1034
Veteran
Joined: 09 Sep 2004
Posts: 1558
|
| Posted: Fri Mar 10, 2006 8:47 pm Post subject: |
|
|
Updated to 2.6.16-rc5-no2
Included tiger's small patch to fix time.c for x86_64, also added the hz-* patches from -ck to change the defualt hz values.
_________________
IRC!: #zen-sources on irc.rizon.net
zen-kernel.org
--
Lost in android development land. |
|
| Back to top |
|
|
Tiger683
Veteran
Joined: 08 Jan 2005
Posts: 1347
Location: Heffner's House
|
| Posted: Fri Mar 10, 2006 10:17 pm Post subject: |
|
|
| cheater1034 wrote: |
/* x86_64-time.c-fix.patch --- THANKS Tiger683
|
Heh, thanks
_________________
Retired gentoo user |
|
| Back to top |
|
|
bigbob73
Guru
Joined: 31 Dec 2004
Posts: 332
Location: Under the Lone Star
|
| Posted: Fri Mar 10, 2006 11:32 pm Post subject: |
|
|
| cheater1034 wrote: | | bigbob73 wrote: | cheater,
still getting the same compile error. I have nothing selected for power management.
mauller linux # make && make modules_install
CHK include/linux/version.h
scripts/kconfig/conf -s arch/i386/Kconfig
#
# using defaults found in .config
#
SPLIT include/linux/autoconf.h -> include/config/*
CC arch/i386/kernel/asm-offsets.s
In file included from arch/i386/kernel/asm-offsets.c:10:
include/linux/suspend.h:62: error: redefinition of 'freeze_processes'
include/linux/sched.h:1458: error: previous definition of 'freeze_processes' was here
include/linux/suspend.h:63: error: redefinition of 'thaw_processes'
include/linux/sched.h:1459: error: previous definition of 'thaw_processes' was here
make[1]: *** [arch/i386/kernel/asm-offsets.s] Error 1
make: *** [prepare0] Error 2
bigbob |
Hmm, how I have not seen that in any other case. I would try the config with a different kernel and see if it persists (ie vanilla-sources), if it does not persist, then I will track it further |
cheater, tried the .config on vanilla-sources and it compliles with no problems. 
_________________
A computers attention span is only as long as it's electrical cord (Murphy) |
|
| Back to top |
|
|
Tiger683
Veteran
Joined: 08 Jan 2005
Posts: 1347
Location: Heffner's House
|
| Posted: Sat Mar 11, 2006 12:27 am Post subject: |
|
|
It's suspend2 related, so no wonder that vanilla works fine
_________________
Retired gentoo user |
|
| Back to top |
|
|
cheater1034
Veteran
Joined: 09 Sep 2004
Posts: 1558
|
| Posted: Sat Mar 11, 2006 12:43 am Post subject: |
|
|
| Tiger683 wrote: | | It's suspend2 related, so no wonder that vanilla works fine |
I thought it was suspend2 related as well, but considering he has no suspend* configuration in his kernel config, and he had this problem with the 2.6.16_rc4-no1 release, I dont think it is suspend2 related. Unless something else in his config is conflicting.
I wish I had more time to look at this issue. I got to go to my dads for the weekend, so I'll see you then.
_________________
IRC!: #zen-sources on irc.rizon.net
zen-kernel.org
--
Lost in android development land. |
|
| Back to top |
|
|
mbar
Veteran
Joined: 19 Jan 2005
Posts: 1990
Location: Poland
|
| Posted: Sat Mar 11, 2006 12:55 pm Post subject: |
|
|
| Sorry, but Suspend2 is NOT working. Kernel Oopses. |
|
| Back to top |
|
|
cheater1034
Veteran
Joined: 09 Sep 2004
Posts: 1558
|
| Posted: Sat Mar 11, 2006 3:19 pm Post subject: |
|
|
| mbar wrote: | | Sorry, but Suspend2 is NOT working. Kernel Oopses. |
Hmm 
It may just be your specific arch, laptop, or whatever. But I will keep working on it.
Looks like I will have to try again 
_________________
IRC!: #zen-sources on irc.rizon.net
zen-kernel.org
--
Lost in android development land.
Last edited by cheater1034 on Sat Mar 11, 2006 3:47 pm; edited 1 time in total |
|
| Back to top |
|
|
wrc1944
Advocate
Joined: 15 Aug 2002
Posts: 3435
Location: Gainesville, Florida
|
| Posted: Sat Mar 11, 2006 3:32 pm Post subject: |
|
|
cheater1034,
I was wondering if this patch set included the ext3 multiple block allocation patches from mm. I had tried them before on a vanilla, and also tried several mm versions with them already included, and had trouble with random inode blocks having to be constantly repaired on all partitions at bootup. Had to give them up, because I still had the problems even after they supposedly fixed it with a new patch. I looked at your detailed patchlist, and didn't see them, so I'm hopeful they aren't included, or if they are, are now fixed- is this the case?
Guess I'll try the new no-sources anyway, as I just did a fresh nesl247 conrad install with his new guide, and need a new kernel. I've been a long-time user of mm kernels, so no-sources seems to suit me just fine.
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.36-r7, gcc-13.2.1_p20230304
kernel-6.8.4 USE=experimental python3_11 |
|
| Back to top |
|
|
KAMIKAZE_
Guru
Joined: 09 Oct 2003
Posts: 309
Location: Riga, Latvia
|
| Posted: Sat Mar 11, 2006 3:44 pm Post subject: |
|
|
Hey, guys!
Had no problems with _rc4, but now _rc5-r1 and -r2 won't boot anymore after choosing them from GRUB menu. Just blank black screen... I'm using the same .config as in _rc4... wtf? 
_________________
-=[powered by Gentoo]=- |
|
| Back to top |
|
|
cheater1034
Veteran
Joined: 09 Sep 2004
Posts: 1558
|
| Posted: Sat Mar 11, 2006 3:46 pm Post subject: |
|
|
| wrc1944 wrote: | cheater1034,
I was wondering if this patch set included the ext3 multiple block allocation patches from mm. I had tried them before on a vanilla, and also tried several mm versions with them already included, and had trouble with random inode blocks having to be constantly repaired on all partitions at bootup. Had to give them up, because I still had the problems even after they supposedly fixed it with a new patch. I looked at your detailed patchlist, and didn't see them, so I'm hopeful they aren't included, or if they are, are now fixed- is this the case?
Guess I'll try the new no-sources anyway, as I just did a fresh nesl247 conrad install with his new guide, and need a new kernel. I've been a long-time user of mm kernels, so no-sources seems to suit me just fine. |
Well, with this kernel it is completely based off of the -mm patchset. (2.6.16-rc5-mm3) It is not messing around with any of the individual sets of -mm patches. So it is including every single patch from the current -mm kernel, you can see them at, http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.16-rc5/2.6.16-rc5-mm3/broken-out/
I don't know where you've had this problem at, I've been on -mm based kernels for some time, except for 2.6.14/15 I've been on vanilla based kernels with few -mm patches.
I would not worry about it, I think Andrew Morton would realize, and fix it, if the problem was common, because of the degree that -mm goes to (the size of it).
If you have problems I will find a fix, if I can't find one, I will try to make a patch to reverse the ext3* patches from -mm.
_________________
IRC!: #zen-sources on irc.rizon.net
zen-kernel.org
--
Lost in android development land. |
|
| Back to top |
|
|
cheater1034
Veteran
Joined: 09 Sep 2004
Posts: 1558
|
| Posted: Sat Mar 11, 2006 3:51 pm Post subject: |
|
|
| KAMIKAZE_ wrote: | Hey, guys!
Had no problems with _rc4, but now _rc5-r1 and -r2 won't boot anymore after choosing them from GRUB menu. Just blank black screen... I'm using the same .config as in _rc4... wtf? |
Which cpu scheduler are you using? If it is not ingosched, try ingosched and see if it still won't boot.
Also, if you are using a framebuffer/gensplash, make sure splashutils is recompiled, otherwise it won't work on the brand new kernel. If you are using a framebuffer to change the resolution but no gensplash theme, then make sure all the appropriate config options are set. Try to boot with nofb if it is the case, and see if it won't be a blank screen then
If those suggestions don't work, I could take a look at your .config on a pastebin or something
_________________
IRC!: #zen-sources on irc.rizon.net
zen-kernel.org
--
Lost in android development land. |
|
| Back to top |
|
|
wrc1944
Advocate
Joined: 15 Aug 2002
Posts: 3435
Location: Gainesville, Florida
|
| Posted: Sat Mar 11, 2006 4:40 pm Post subject: |
|
|
Thanks cheater1034,
I'm compiling the new no-sources today. In case you're interested in what my problem was about, I have several posts towards the bottom of page 9 on the ext3 tips thread describing it.
https://forums.gentoo.org/viewtopic-t-305871-start-0-postdays-0-postorder-asc-highlight-ext3+tips.html
I eventually traced it to the ext3 multiple block allocation patches, both in mm (but only after Andrew started including them), and self-applied to vanilla. When I dropped them (even after the fix patch was added), at boot it repaired things one last time, and never happened again. Maybe mm is fixed now, and if they are still in there, I won't have the problem. Will post back and let you know.
_________________
Main box- AsRock x370 Gaming K4
Ryzen 7 3700x, 3.6GHz, 16GB GSkill Flare DDR4 3200mhz
Samsung SATA 1000GB, Radeon HD R7 350 2GB DDR5
OpenRC Gentoo ~amd64 plasma, glibc-2.36-r7, gcc-13.2.1_p20230304
kernel-6.8.4 USE=experimental python3_11 |
|
| Back to top |
|
|
KAMIKAZE_
Guru
Joined: 09 Oct 2003
Posts: 309
Location: Riga, Latvia
|
| Posted: Sat Mar 11, 2006 5:23 pm Post subject: |
|
|
| cheater1034 wrote: | | KAMIKAZE_ wrote: | Hey, guys!
Had no problems with _rc4, but now _rc5-r1 and -r2 won't boot anymore after choosing them from GRUB menu. Just blank black screen... I'm using the same .config as in _rc4... wtf? |
Which cpu scheduler are you using? If it is not ingosched, try ingosched and see if it still won't boot.
Also, if you are using a framebuffer/gensplash, make sure splashutils is recompiled, otherwise it won't work on the brand new kernel. If you are using a framebuffer to change the resolution but no gensplash theme, then make sure all the appropriate config options are set. Try to boot with nofb if it is the case, and see if it won't be a blank screen then
If those suggestions don't work, I could take a look at your .config on a pastebin or something |
with "nofb" I saw this:
| Quote: | ...
Checking if this processor honours the WP bit even supervisor mode... Ok.
divide error: 0000 [#1]
PREEMPT
last sys file:
Modules linked in:
CPU: 0
EIP: 0060:[<c02cff27>] Not tained VLI
EFLAGS: 00010246 (2.6.16-rc5-no2 #3)
...
<0> Kernel panic - not syncing: Attempted to kill idle task!
|
_________________
-=[powered by Gentoo]=- |
|
| Back to top |
|
|
CoronaLover
Retired Dev
Joined: 20 Jun 2002
Posts: 163
Location: Rosh-ha'ayin, Israel
|
| Posted: Sat Mar 11, 2006 5:35 pm Post subject: |
|
|
| same here, kernel panic. |
|
| Back to top |
|
|
|
Unsupported Software
