View previous topic :: View next topic |
Author |
Message |
osar_sabin n00b
Joined: 09 Mar 2006 Posts: 69
|
Posted: Mon Mar 13, 2006 8:39 pm Post subject: wireless-tools, errore allo scan |
|
|
raga, digitando # /etc/init.d/net.eth2 start
segue il segente errore...sapete da cosa è dovuto?
Quote: |
* Starting eth2
* Configuring wireless network for eth2
* eth2 does not support scanning
* You either need to set a preferred_aps list in /etc/conf.d/wireless
* preferred_aps=( "ESSID1" "ESSID2" )
* and set associate_order_eth2="forcepreferred"
* or set associate_order_eth2="forcepreferredonly"
* or hardcode the ESSID to "any" and let the driver find an Access Point
* essid_eth2="any"
* or configure defaulting to Ad-Hoc when Managed fails
* adhoc_essid_eth2="WLAN"
* or hardcode the ESSID against the interface (not recommended)
* essid_eth2="ESSID"
* Failed to configure wireless for eth2 [ !! ]
|
/etc/conf.d/wireless è stato impostato così...
Quote: |
modules=( "iwconfig" )
key_ESSID1="[1] s:yourkeyhere key [1] enc open"
key_ESSID2="[1] aaaa-bbbb-cccc-dd key [1] enc restricted"
preferred_aps=( "ESSID1" "ESSID2" ) |
ed ho provato anche a modificarlo così:
Quote: | modules=( "iwconfig" )
key_ESSID1="[1] s:yourkeyhere key [1] enc open"
key_ESSID2="[1] aaaa-bbbb-cccc-dd key [1] enc restricted"
preferred_aps=( "ESSID1" "ESSID2" )
associate_order_eth2="forcepreferred"
esseid_eth2="any"
config_ESSID1=( "192.168.0.3/24 brd 192.168.0.255" )
routes_ESSID1=( "default via 192.168.0.1" )
config_ESSID2=( "dhcp" )
fallback_ESSID2=( "192.168.3.4/24" )
fallback_route_ESSID2=( "default via 192.168.3.1" )
dns_servers_ESSID1=( "192.168.0.1" "192.168.0.2" )
dns_domain_ESSID1="some.domain"
dns_search_domains_ESSID1="search.this.domain search.that.domain"
config_001122334455=( "dhcp" )
dhcpcd_001122334455="-t 10"
dns_servers_001122334455=( "192.168.0.1" "192.168.0.2" )
|
|
|
Back to top |
|
|
nick_spacca l33t
Joined: 29 May 2004 Posts: 689 Location: Paris/France
|
Posted: Tue Mar 14, 2006 12:57 am Post subject: |
|
|
Spero tu abbia sostituito ad ESSID1/2 i relativi valori REALI (quelli configurati dall' AP/router WiFi)...
O forse mi sbaglio e non ho visto qualche simbolo di commento nel file di conf che hai postato... _________________ I can resist anything but temptation.
(O. Wilde) |
|
Back to top |
|
|
osar_sabin n00b
Joined: 09 Mar 2006 Posts: 69
|
Posted: Tue Mar 14, 2006 10:48 am Post subject: |
|
|
cioè???potresti spiegarmi coome impostarlo in modo da potermi collegare automaticamente a qualsiasi rete wireless???Anche ad esempio a quello di un altro portatile???
thanks |
|
Back to top |
|
|
Cazzantonio Bodhisattva
Joined: 20 Mar 2004 Posts: 4514 Location: Somewere around the world
|
Posted: Tue Mar 14, 2006 1:13 pm Post subject: |
|
|
Non ci si può connettere automaticamente a qualsiasi rete wireless...
Alcune richiedono una password o una chiave, altre hanno un determinato essid, per connettere due pc bisogna fare una connessioe ad-hoc mentre per un ap è managed, etc.... etc....
ti do due consigli:
1) ti emergi wlassistant (è masked) che è grafico e ti consente di scegliere le varie connessioni disponibili a cui connetterti
2) ti leggi la documentazione sullo wireless, ne capisci il funzionamento di base, dopodiché sarai in grado di connetterti a qualsiasi rete con pochi comandi da terminale.
Una soluzione diversa da quelle precedenti mi sembra difficile....
Quote: | /etc/conf.d/wireless è stato impostato così... |
ovvero mi sembra che tu non lo abbia affatto impostato.... hai letto che c'è scritto dentro? ti dice appunto di inserire lì i tuoi valori... ti consiglio di leggere la documentazione sul sito gentoo, sullo wiki, sul forum o su google prima di fare le cose a caso... _________________ Any mans death diminishes me, because I am involved in Mankinde; and therefore never send to know for whom the bell tolls; It tolls for thee.
-John Donne |
|
Back to top |
|
|
osar_sabin n00b
Joined: 09 Mar 2006 Posts: 69
|
Posted: Tue Mar 14, 2006 5:29 pm Post subject: |
|
|
thz |
|
Back to top |
|
|
|