| View previous topic :: View next topic |
| Author |
Message |
Sputnick
n00b
Joined: 10 May 2004
Posts: 64
|
 Posted: Tue Mar 14, 2006 10:21 pm Post subject: emerge-webrsync ei toimi |
 |
|
readlink "/usr/portage/media-video/blinkenthemes" failed: Permission denied
readdir(media-video/kavi2svcd): (5) Input/output error
readlink "/usr/portage/media-video/ogmrip" failed: Permission denied
readlink "/usr/portage/media-video/vdrsync" failed: Permission denied
rsync error: some files could not be transferred (code 23) at main.c(632)
cleaning up
recv_generator: mkdir "/usr/portage/media-video/blinkenthemes" failed: Permission denied
stat "/usr/portage/media-video/blinkenthemes" failed: Permission denied
recv_generator: mkdir "/usr/portage/media-video/blinkenthemes/files" failed: Permission denied
stat "/usr/portage/media-video/blinkenthemes/files" failed: Permission denied
recv_generator: mkdir "/usr/portage/media-video/kavi2svcd/files" failed: Input/output error
stat "/usr/portage/media-video/kavi2svcd/files" failed: Input/output error
recv_generator: mkdir "/usr/portage/media-video/ogmrip" failed: Permission denied
stat "/usr/portage/media-video/ogmrip" failed: Permission denied
recv_generator: mkdir "/usr/portage/media-video/ogmrip/files" failed: Permission denied
stat "/usr/portage/media-video/ogmrip/files" failed: Permission denied
recv_generator: mkdir "/usr/portage/media-video/vdrsync" failed: Permission denied
stat "/usr/portage/media-video/vdrsync" failed: Permission denied
recv_generator: mkdir "/usr/portage/media-video/vdrsync/files" failed: Permission denied
stat "/usr/portage/media-video/vdrsync/files" failed: Permission denied
jne permission denied aikamoinen litania...
miten tuon saa korjattua...
roottina tuo tota tekee...
vedin sitten emerge glibc ja error:
configure: error:
*** These critical programs are missing or too old: gcc
*** Check the INSTALL file for required versions. |
|
| Back to top |
|
 |
Kaapeli
Tux's lil' helper
Joined: 27 Dec 2004
Posts: 110
Location: Oulu, Finland
|
| Posted: Wed Mar 15, 2006 6:47 am Post subject: |
|
|
Input/output error tarkottaa sitä että levyltä ei pystytty lukemaan kyseistä tiedostoa. Yleensä tämä on rikkoontuneen levyn merkki. Suosittelisin tarkastamaan levyn SMART tiedot smartmontoolsilla:
smartctl -a /dev/hdX
_________________
Temperatures |
|
| Back to top |
|
|
Sputnick
n00b
Joined: 10 May 2004
Posts: 64
|
| Posted: Wed Mar 15, 2006 9:44 am Post subject: |
|
|
| Kaapeli wrote: | Input/output error tarkottaa sitä että levyltä ei pystytty lukemaan kyseistä tiedostoa. Yleensä tämä on rikkoontuneen levyn merkki. Suosittelisin tarkastamaan levyn SMART tiedot smartmontoolsilla:
smartctl -a /dev/hdX |
| Code: | === START OF INFORMATION SECTION ===
Device Model: WDC WD1200JB-00DUA3
Serial Number: WD-WMACM1329827
Firmware Version: 75.13B75
User Capacity: 120,034,123,776 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Mar 15 14:44:57 2006 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (4335) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 59) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 151 148 021 Pre-fail Always - 3450
4 Start_Stop_Count 0x0032 099 099 040 Old_age Always - 1286
5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 4
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 073 073 000 Old_age Always - 20415
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1072
196 Reallocated_Event_Count 0x0032 197 197 000 Old_age Always - 3
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 6 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 6 occurred at disk power-on lifetime: 958 hours (39 days + 22 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 80 da ff 53 40 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 25 00 00 80 00 00 6d+16:14:05.650 NOP [Abort queued commands]
00 00 35 00 00 e7 10 00 6d+16:14:05.650 NOP [Abort queued commands]
00 00 35 00 00 08 00 00 6d+16:14:05.650 NOP [Abort queued commands]
00 00 25 00 00 08 00 00 6d+16:14:05.650 NOP [Abort queued commands]
00 00 35 00 00 bf 0b 00 6d+16:14:05.650 NOP [Abort queued commands]
Error 5 occurred at disk power-on lifetime: 879 hours (36 days + 15 hours)
When the command that caused the error occurred, the device was doing SMART Offline or Self-test.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 80 da ff 53 40 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 25 00 00 80 00 00 3d+09:33:56.650 NOP [Abort queued commands]
00 00 35 00 00 10 00 00 3d+09:33:56.650 NOP [Abort queued commands]
00 00 60 00 03 5f 9d 00 3d+09:33:56.650 NOP [Abort queued commands]
00 00 25 00 00 18 00 00 3d+09:33:56.650 NOP [Abort queued commands]
00 00 35 00 03 f7 10 00 3d+09:33:56.650 NOP [Abort queued commands]
Error 4 occurred at disk power-on lifetime: 798 hours (33 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 50 da ff 53 40 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 25 00 00 50 00 00 07:03:17.300 NOP [Abort queued commands]
00 00 53 00 03 8f ff 00 07:03:17.300 NOP [Abort queued commands]
00 00 35 00 00 10 00 00 07:03:17.300 NOP [Abort queued commands]
00 00 80 00 03 07 85 00 07:03:17.300 NOP [Abort queued commands]
00 00 25 00 00 60 00 00 07:03:17.300 NOP [Abort queued commands]
Error 3 occurred at disk power-on lifetime: 527 hours (21 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 78 da ff 53 40 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 25 00 00 78 00 00 05:38:28.900 NOP [Abort queued commands]
01 00 16 03 03 37 4a 00 05:38:28.900 [RESERVED]
00 00 25 00 00 08 00 00 05:38:28.900 NOP [Abort queued commands]
00 00 53 03 03 8f ff 00 05:38:28.900 NOP [Abort queued commands]
00 00 25 00 00 08 00 00 05:38:28.900 NOP [Abort queued commands]
Error 2 occurred at disk power-on lifetime: 527 hours (21 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 78 da ff 53 40 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
00 00 25 00 00 78 00 00 05:38:23.800 NOP [Abort queued commands]
00 00 53 03 03 87 fe 00 05:38:23.800 NOP [Abort queued commands]
00 00 25 00 00 80 00 00 05:38:23.800 NOP [Abort queued commands]
00 00 25 00 00 78 00 00 05:38:23.800 NOP [Abort queued commands]
00 00 3a 03 03 c7 de 00 05:38:23.800 NOP [Abort queued commands]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 86 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay. |
tuollasta antaa... mikä neuvoksi? |
|
| Back to top |
|
|
Kaapeli
Tux's lil' helper
Joined: 27 Dec 2004
Posts: 110
Location: Oulu, Finland
|
| Posted: Wed Mar 15, 2006 4:59 pm Post subject: |
|
|
| Code: |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 4
196 Reallocated_Event_Count 0x0032 197 197 000 Old_age Always - 3
|
Noitten perusteella voi päätellä jo sen että levyllä on otettu bad sektoreiden tilalle varasektoreita. Jo nuo yksistään voi mielestäni selittää kuvailemasi ongelmat. Toisinsanoen levy on särki. Voit vielä ajaa pitkän self-testin levylle komennolla:
smartctl -t long /dev/hdX
Sitten kun levy on ajanut testin loppuun niin voit tarkistaa (tai postata tänne) miten attribuutit ovat muuttuneet. Myös täällä kohdin:
| Code: |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 86
|
tulee näkyviin se mihinkä kohtaan levyä ensimmäinen viallinen sektori osuu, jos siellä vielä niitä on. Eli itsetesti pysähtyy ensimmäisen virheen kohdalle.
Ilmeisesti tämä levy on jo aika vanha (käyttötunteja jo yli kahden vuoden verran), jos takuuta on vielä voimassa niin suosittelen takuuvaihtoa. Jos takuuta ei ole, suosittelen siirtämään tärkeän datan parempaan turvaan. En luottaisi tuohon levyyn enää kovin paljoa.
_________________
Temperatures |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Finnish
