Problems With Display Drivers (Kernel/GL)

[paulmer2003]

Hello.. Ive got a dual GPU setup.. ATI Radeon 9600pro agp and nVidia vanta... heres lspci output:
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:08.0 VGA compatible controller: nVidia Corporation NV6 [Vanta/Vanta LT] (rev 15)
00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600]
01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary)

Heres what happens when I 'modprobe fglrx' or 'modprobe nvidia'
FATAL: Error inserting nvidia (/lib/modules/2.6.15-gentoo-r7-Pauly/video/nvidia.ko): No such device
FATAL: Error inserting fglrx (/lib/modules/2.6.15-gentoo-r7-Pauly/video/fglrx.ko): Operation not permitted

This is really annoying because I cant use glx
Xlib: extension "GLX" missing on display ":0.0".
glxgears: Error: couldn't get an RGB, Double-buffered visual.

[kfiaciarka]

What do you mean dual gpu?
Maybe this will help you with ati drivers http://odin.prohosting.com/wedge01/gentoo-radeon-faq.html
Try reemerge nvidia-kernel nvidia-glx - maybe this will be helpful.

[chrismortimore]

http://www.nvidia.com/object/IO_18897.html

Your vanta won't work if you are using a driver newer than 6629, so check your version. Last I checked, 6629 is the current "stable" version in Gentoo.
_________________
Desktop: AMD Athlon64 3800+ Venice Core, 2GB PC3200, 2x160GB 7200rpm Maxtor DiamondMax 10, 2x320GB WD 7200rpm Caviar RE, Nvidia 6600GT 256MB
Laptop: Intel Pentium M, 512MB PC2700, 60GB 5400rpm IBM TravelStar, Nvidia 5200Go 64MB

[paulmer2003]

fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 1412 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[fglrx:firegl_stub_register] *ERROR* Unable to the open some already present DRM kernel module!

^^ From 'dmesg' after I 'modprobe fglrx'

I also tryed taking out the nvidia and it still work work...