d.i.b
n00b
Joined: 21 Feb 2006
Posts: 66
|
 Posted: Sat Mar 18, 2006 10:19 pm Post subject: Wieviel VideoRam wird erkannt? |
 |
|
Hi,
ich habe ein kleines Problem und zwar weiss ich nicht wieviel RAM xorg erkennt und in der Logdatei stehen verwirrende Einträge. Einmal erkennt er nur 8MB dann 12MB und dann doch 128 MB ?  
Ganzer I810 Abschnit:
| Code: |
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(==) I810(0): Depth 16, (==) framebuffer bpp 16
(==) I810(0): RGB weight 565
(==) I810(0): Default visual is TrueColor
(**) I810(0): Option "NoAccel" "false"
(**) I810(0): Option "DRI" "true"
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 7872 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) I810(0): Chipset: "915GM"
(--) I810(0): Linear framebuffer at 0xC0000000
(--) I810(0): IO registers at addr 0xB0080000
(II) I810(0): 2 display pipes available.
(II) I810(0): detected 7932 kB stolen memory.
(II) I810(0): I830CheckAvailableMemory: 440320 kB available
(II) I810(0): Monitoring connected displays enabled
(II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 12288 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): BIOS now sees 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 7932 kByte
(**) I810(0): VideoRAM: 131072 kByte
(==) I810(0): video overlay key set to 0x83e
(**) I810(0): page flipping disabled
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): BIOS Build: 1219
(==) I810(0): Device Presence: disabled.
(==) I810(0): Display Info: enabled.
(II) I810(0): Broken BIOSes cause the system to hang here.
(II) I810(0): Display Info: CRT: attached: FALSE, present: TRUE, size: (720,400)
(II) I810(0): Display Info: TV: attached: FALSE, present: TRUE, size: (1024,768)
(II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1280,800)
(II) I810(0): Display Info: CRT2 (second CRT): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,2059)
(II) I810(0): Size of device LFP (local flat panel) is 1280 x 800
(II) I810(0): No active displays on Pipe A.
(II) I810(0): Currently active displays on Pipe B:
(II) I810(0): LFP (local flat panel)
(II) I810(0): Lowest common panel size for pipe B is 1280 x 800
(==) I810(0): Display is using Pipe B
(--) I810(0): Maximum frambuffer space: 130904 kByte
(II) I810(0): VESA VBE PanelID read successfully
(II) I810(0): PanelID returned panel resolution : 1280x800
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(--) I810(0): A non-CRT device is attached to pipe B.
(--) I810(0): Maximum space available for video modes: 12288 kByte
(WW) I810(0): config file hsync range 45.7143-50.5263kHz not within DDC hsync ranges.
(II) I810(0): LaptopTFT: Using hsync range of 45.71-50.53 kHz
(II) I810(0): LaptopTFT: Using vrefresh value of 60.00 Hz
(II) I810(0): Increasing the scanline pitch to allow tiling mode (1280 -> 2048).
(--) I810(0): Virtual size is 1280x800 (pitch 2048)
(**) I810(0): *Built-in mode "1280x800"
(--) I810(0): Display dimensions: (330, 210) mm
(--) I810(0): DPI set to (98, 96)
(==) I810(0): VBE Restore workaround: enabled.
(II) I810: Failed to load module "dri" (already loaded, 0)
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 7872 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Allocated 128 kB for the ring buffer at 0x0
(II) I810(0): Allocating at least 384 scanlines for pixmap cache
(II) I810(0): Initial framebuffer allocation size: 4736 kByte
(II) I810(0): Allocated 4 kB for HW cursor at 0xffff000 (0x0d5fa000)
(II) I810(0): Allocated 16 kB for HW (ARGB) cursor at 0xfffb000 (0x0d7dc000)
(II) I810(0): Allocated 4 kB for Overlay registers at 0xfffa000 (0x0d608000).
(II) I810(0): Allocated 64 kB for the scratch buffer at 0xffea000
(II) I810(0): [drm] DRM interface version 1.2
(II) I810(0): [drm] created "i915" driver at busid "pci:0000:00:02.0"
(II) I810(0): [drm] added 8192 byte SAREA at 0xe0150000
(II) I810(0): [drm] mapped SAREA 0xe0150000 to 0xb7b43000
(II) I810(0): [drm] framebuffer handle = 0xc0020000
(II) I810(0): [drm] added 1 reserved context for kernel
(II) I810(0): Allocated 3200 kB for the back buffer at 0xf800000.
(II) I810(0): Allocated 3200 kB for the depth buffer at 0xf400000.
(II) I810(0): Allocated 32 kB for the logical context at 0xf3f8000.
(II) I810(0): Allocated 119296 kB for textures at 0x4c0000
(II) I810(0): Updated framebuffer allocation size from 4736 to 5128 kByte
(II) I810(0): Updated pixmap cache from 384 scanlines to 482 scanlines
(II) I810(0): 0x824a2e4: Memory at offset 0x00020000, size 5128 kBytes
(II) I810(0): 0x824a930: Memory at offset 0x0ffff000, size 4 kBytes
(II) I810(0): 0x824a958: Memory at offset 0x0fffb000, size 16 kBytes
(II) I810(0): 0x824a824: Memory at offset 0x00000000, size 128 kBytes
(II) I810(0): 0x824a324: Memory at offset 0x0ffea000, size 64 kBytes
(II) I810(0): 0x824ad38: Memory at offset 0x0fffa000, size 4 kBytes
(II) I810(0): 0x824a374: Memory at offset 0x0f800000, size 3200 kBytes
(II) I810(0): 0x824a394: Memory at offset 0x0f400000, size 3200 kBytes
(II) I810(0): 0x824a3d4: Memory at offset 0x0f3f8000, size 32 kBytes
(II) I810(0): 0x824a3b4: Memory at offset 0x004c0000, size 119296 kBytes
(II) I810(0): Activating tiled memory for the back buffer.
(II) I810(0): Activating tiled memory for the depth buffer.
(II) I810(0): [drm] Registers = 0xb0080000
(II) I810(0): [drm] Back Buffer = 0xcf800000
(II) I810(0): [drm] Depth Buffer = 0xcf400000
(II) I810(0): [drm] ring buffer = 0xc0000000
(II) I810(0): [drm] textures = 0xc04c0000
(II) I810(0): [drm] dma control initialized, using IRQ 17
(II) I810(0): [drm] Initialized kernel agp heap manager, 122159104
(II) I810(0): [dri] visual configs initialized
(==) I810(0): Write-combining range (0xc0000000,0x10000000)
(II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(WW) I810(0): Extended BIOS function 0x5f05 failed.
(II) I810(0): xf86BindGARTMemory: bind key 7 at 0x007bf000 (pgoffset 1983)
(II) I810(0): xf86BindGARTMemory: bind key 0 at 0x0ffff000 (pgoffset 65535)
(II) I810(0): xf86BindGARTMemory: bind key 1 at 0x0fffb000 (pgoffset 65531)
(II) I810(0): xf86BindGARTMemory: bind key 3 at 0x0ffea000 (pgoffset 65514)
(II) I810(0): xf86BindGARTMemory: bind key 2 at 0x0fffa000 (pgoffset 65530)
(II) I810(0): xf86BindGARTMemory: bind key 4 at 0x0f800000 (pgoffset 63488)
(II) I810(0): xf86BindGARTMemory: bind key 5 at 0x0f400000 (pgoffset 62464)
(II) I810(0): xf86BindGARTMemory: bind key 6 at 0x0f3f8000 (pgoffset 62456)
(II) I810(0): Display plane A is disabled and connected to Pipe A.
(II) I810(0): Display plane B is enabled and connected to Pipe B.
(II) I810(0): Enabling plane B.
(II) I810(0): Display plane A is now disabled and connected to Pipe A.
(II) I810(0): Display plane B is now enabled and connected to Pipe B.
(II) I810(0): PIPEACONF is 0x00000000
(II) I810(0): PIPEBCONF is 0x80000000
(II) I810(0): Mode bandwidth is 61 Mpixel/s
(II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 126 Mbyte/s, 0 Mbyte/s
(II) I810(0): Using XFree86 Acceleration Architecture (XAA)
(==) I810(0): Backing store disabled
(==) I810(0): Silken mouse enabled
(II) I810(0): Initializing HW Cursor
(II) I810(0): X context handle = 0x1
(II) I810(0): [drm] installed DRM signal handler
(II) I810(0): [DRI] installation complete
(II) I810(0): direct rendering: Enabled
|
Und VideoRAM bezogen:
| Code: |
(II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM
(II) I810(0): BIOS now sees 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 7932 kByte
(**) I810(0): VideoRAM: 131072 kByte
|
Und warum führt xorg einige Befehle mehrmals aus oder mit Modulen erstmal laden -> reloaden ?
MFG
d.i.b |
|
Deutsches Forum (German)
