| View previous topic :: View next topic |
| Author |
Message |
XrateR
Apprentice
Joined: 18 Nov 2005
Posts: 164
Location: Sweden
|
 Posted: Tue Mar 21, 2006 5:44 pm Post subject: how do I find my harddrives? |
 |
|
hello,
I have a problem finding my ide drivers. I have my OS on a SATA and then I also have 2 ide drivers.
I can see and use them in windows, but I can't find them in linux. But the only way I have tried is to
typ #fdisk /dev/hda .. b .. c .. and so on. But I can't find them. So now I wonder if there is some
program in portage that can detect all things in the computer. Some thing like Sisoft sandra to windows.
For example.
Last edited by XrateR on Thu Mar 23, 2006 5:31 pm; edited 1 time in total |
|
| Back to top |
|
 |
chrismortimore
l33t
Joined: 03 Dec 2005
Posts: 721
Location: Edinburgh, UK
|
| Posted: Tue Mar 21, 2006 5:48 pm Post subject: |
|
|
"lspci" will show you what IDE chipset you have
_________________
Desktop: AMD Athlon64 3800+ Venice Core, 2GB PC3200, 2x160GB 7200rpm Maxtor DiamondMax 10, 2x320GB WD 7200rpm Caviar RE, Nvidia 6600GT 256MB
Laptop: Intel Pentium M, 512MB PC2700, 60GB 5400rpm IBM TravelStar, Nvidia 5200Go 64MB |
|
| Back to top |
|
|
XrateR
Apprentice
Joined: 18 Nov 2005
Posts: 164
Location: Sweden
|
| Posted: Tue Mar 21, 2006 7:06 pm Post subject: |
|
|
yes I know, but it was not what I was looking after.
I think I know what you think but, yes I have the support for right chipset in my kernel.
I have look at it now and all things in my kernel seems right. |
|
| Back to top |
|
|
chrismortimore
l33t
Joined: 03 Dec 2005
Posts: 721
Location: Edinburgh, UK
|
| Posted: Tue Mar 21, 2006 7:26 pm Post subject: |
|
|
Hmm... So you just cannot find your hard drive nodes in /dev? Set RC_DEVICE_TARBALL="no" in /etc/conf.d/rc and reboot. That'll remove all nodes for things you don't actually have and you'll see what hard drive nodes have been detected.
_________________
Desktop: AMD Athlon64 3800+ Venice Core, 2GB PC3200, 2x160GB 7200rpm Maxtor DiamondMax 10, 2x320GB WD 7200rpm Caviar RE, Nvidia 6600GT 256MB
Laptop: Intel Pentium M, 512MB PC2700, 60GB 5400rpm IBM TravelStar, Nvidia 5200Go 64MB |
|
| Back to top |
|
|
XrateR
Apprentice
Joined: 18 Nov 2005
Posts: 164
Location: Sweden
|
| Posted: Tue Mar 21, 2006 7:46 pm Post subject: |
|
|
I can now see only one and that is hdb. But I can't mount it.
| Code: | zerox ~ # ls /dev/ | grep hd
hdb
zerox ~ # mount /dev/hdb /mnt/hdb/
mount: No medium found
zerox ~ #
|
|
|
| Back to top |
|
|
chrismortimore
l33t
Joined: 03 Dec 2005
Posts: 721
Location: Edinburgh, UK
|
| Posted: Tue Mar 21, 2006 7:50 pm Post subject: |
|
|
I'm gonna presume its a CD/DVD drive of some form then. Check it has a disc is the first thing I can think of... Make sure you have support for it in your kernel. Check your ribbon cables perhaps, I knackered one of mine and my DVD writer stopped working because of it.
_________________
Desktop: AMD Athlon64 3800+ Venice Core, 2GB PC3200, 2x160GB 7200rpm Maxtor DiamondMax 10, 2x320GB WD 7200rpm Caviar RE, Nvidia 6600GT 256MB
Laptop: Intel Pentium M, 512MB PC2700, 60GB 5400rpm IBM TravelStar, Nvidia 5200Go 64MB |
|
| Back to top |
|
|
XrateR
Apprentice
Joined: 18 Nov 2005
Posts: 164
Location: Sweden
|
| Posted: Tue Mar 21, 2006 8:01 pm Post subject: |
|
|
The kernel seems to be okey and the disks works in windows.
So I don't know what it can be. But here is some more info:
| Code: | zerox ~ # lspci | grep IDE
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 04)
zerox ~ #
from /usr/src/linux/.config
---------------------------
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
---------------------------
|
Last edited by XrateR on Tue Mar 21, 2006 9:38 pm; edited 1 time in total |
|
| Back to top |
|
|
chrismortimore
l33t
Joined: 03 Dec 2005
Posts: 721
Location: Edinburgh, UK
|
| Posted: Tue Mar 21, 2006 8:05 pm Post subject: |
|
|
Hmm.. Does "hdparm /dev/hdb" give you anything? Can you do something like "dd if=/dev/hdb of=test.img" and get a dump of the disk in the drive? I'm kinda running out of ideas, can you tell? 
_________________
Desktop: AMD Athlon64 3800+ Venice Core, 2GB PC3200, 2x160GB 7200rpm Maxtor DiamondMax 10, 2x320GB WD 7200rpm Caviar RE, Nvidia 6600GT 256MB
Laptop: Intel Pentium M, 512MB PC2700, 60GB 5400rpm IBM TravelStar, Nvidia 5200Go 64MB |
|
| Back to top |
|
|
neylitalo
Tux's lil' helper
Joined: 29 Jan 2006
Posts: 81
|
| Posted: Tue Mar 21, 2006 8:09 pm Post subject: |
|
|
I'm guessing your SATA drive will be /dev/sdx - try that.
And make sure your BIOS can detect the drives. |
|
| Back to top |
|
|
XrateR
Apprentice
Joined: 18 Nov 2005
Posts: 164
Location: Sweden
|
| Posted: Tue Mar 21, 2006 8:14 pm Post subject: |
|
|
the true is that I can't see the disks in my bios. But that have I never done. Why do I not know
but in windows I can see them and do what ever I want with them. |
|
| Back to top |
|
|
jschellhaass
Guru
Joined: 20 Jan 2004
Posts: 341
|
| Posted: Tue Mar 21, 2006 9:48 pm Post subject: |
|
|
Does dmesg show anything?
jeff |
|
| Back to top |
|
|
XrateR
Apprentice
Joined: 18 Nov 2005
Posts: 164
Location: Sweden
|
| Posted: Wed Mar 22, 2006 5:41 pm Post subject: |
|
|
I know this is much but I didn't know if grep ide was the only thing
that was importent.
| Code: | zerox ~ # dmesg
Linux version 2.6.15-gentoo-r7 (root@zerox) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #2 SMP PREEMPT Wed Mar 22 00:35:37 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
found SMP MP-table at 000f5a60
On node 0 totalpages: 229376
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:0
DMI 2.2 present.
ACPI: RSDP (v000 IntelR ) @ 0x000f75f0
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff30c0
ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff76c0
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7600
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Gentoo_2 ro root=804 video=vesafb:1280x1024-32@60,mtrr:3,ywrap splash=silent,fadein,theme:livecd-2005.1 quiet CONSOLE=/dev/tty1
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 3399.501 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 901400k/917504k available (3449k kernel code, 15676k reserved, 1040k data, 244k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6808.38 BogoMIPS (lpj=13616769)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000649d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6798.56 BogoMIPS (lpj=13597131)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000649d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03
Total of 2 processors activated (13606.95 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 1514k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 3.00 entry at 0xfbad0, last bus=3
PCI: Using MMCONFIG
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: b0000000-cfffffff
PREFETCH window: 50000000-500fffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: d3000000-d30fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: d0000000-d2ffffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1143052104.604:1): initialized
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.25 [Flags: R/W DEBUG].
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
vesafb: NVIDIA Corporation, G70 Board - p317h2 , Chip Rev (OEM: NVIDIA)
vesafb: VBE version: 3.0
vesafb: protected mode interface info at c000:d4f0
vesafb: pmi: set display start = c00cd526, set palette = c00cd590
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: VBIOS/hardware doesn't support DDC transfers
vesafb: no monitor limits have been set
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=2048
Console: switching to colour frame buffer device 160x64
fbsplash: console 0 using theme 'livecd-2005.1'
fbsplash: switched splash state to 'on' on console 0
vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 10240k, total 262144k
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (0 C)
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2
Copyright (c) 1999-2005 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 20 (level, low) -> IRQ 17
e100: eth0: e100_probe: addr 0xd2003000, irq 17, MAC addr 00:11:09:CA:C1:DB
tg3.c:v3.47 (Dec 28, 2005)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth1: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:11:09:ca:c1:dc
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe
Probing IDE interface ide1...
input: AT Translated Set 2 keyboard as /class/input/input0
hdd: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
ata: 0x170 IDE port busy
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
ata1: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
Vendor: ATA Model: ST380817AS Rev: 3.42
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 19 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:03:03.0, from 11 to 2
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[d2002000-d20027ff] Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd3104000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e300
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e100
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e200
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC).
ALSA device list:
No soundcards found.
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
ip_conntrack version 2.4 (7168 buckets, 57344 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 244k freed
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000781493]
Adding 506036k swap on /dev/sda3. Priority:-1 extents:1 across:506036k
EXT3 FS on sda4, internal journal
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
zerox ~ #
|
|
|
| Back to top |
|
|
LinuxLoader
n00b
Joined: 04 May 2005
Posts: 18
Location: Bulgaria
|
| Posted: Wed Mar 22, 2006 5:46 pm Post subject: |
|
|
fdisk -l will show u all drives on the mashine ( if needed modules are compiled or loaded)
i think that your drive is sata
cfdisk /dev/sda to see all
mount /dev/sda* /path/mount/point for * use 1 or how u format the device[/code]
| Code: |
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
ata1: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
Vendor: ATA Model: ST380817AS Rev: 3.42
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
|
_________________
Watch your thoughts; they become words.Watch your words; they becîme actions. Watch your actions;they become habits. Watch your habits; they become character.Watch your character;It becomes your destiny. |
|
| Back to top |
|
|
XrateR
Apprentice
Joined: 18 Nov 2005
Posts: 164
Location: Sweden
|
| Posted: Wed Mar 22, 2006 5:50 pm Post subject: |
|
|
one more thing, after I change some things in my BIOS. So can I now see the drivers.
But this is what happen then I trie to mount and open them with fdisk:
| Code: | zerox ~ # ls /dev | grep hd
hdb
hdd
zerox ~ # mount /dev/hdd1 /mnt/hdd
mount: special device /dev/hdd1 does not exist
zerox ~ # mount /dev/hdb1 /mnt/hdb
mount: special device /dev/hdb1 does not exist
zerox ~ # fdisk /dev/hdd
Unable to open /dev/hdd
zerox ~ # fdisk /dev/hdb
Unable to open /dev/hdb
zerox ~ #
|
|
|
| Back to top |
|
|
jschellhaass
Guru
Joined: 20 Jan 2004
Posts: 341
|
| Posted: Wed Mar 22, 2006 6:10 pm Post subject: |
|
|
After making the BIOS change does dmesg show anything different? grep ide should be fine.
jeff |
|
| Back to top |
|
|
XrateR
Apprentice
Joined: 18 Nov 2005
Posts: 164
Location: Sweden
|
| Posted: Wed Mar 22, 2006 8:05 pm Post subject: |
|
|
| no I don't think so. What I know it look like before. no changes. |
|
| Back to top |
|
|
jschellhaass
Guru
Joined: 20 Jan 2004
Posts: 341
|
| Posted: Wed Mar 22, 2006 8:50 pm Post subject: |
|
|
It's skipping the probe of ide0 because the port(s) are already in use.
| Code: | ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: I/O resource 0x1F0-0x1F7 not free.
ide0: ports already in use, skipping probe |
jeff |
|
| Back to top |
|
|
XrateR
Apprentice
Joined: 18 Nov 2005
Posts: 164
Location: Sweden
|
| Posted: Wed Mar 22, 2006 8:57 pm Post subject: |
|
|
How can it already be in use? and how can I fix it?
I do not know much about what to do with a ide port
that already is in use. |
|
| Back to top |
|
|
jschellhaass
Guru
Joined: 20 Jan 2004
Posts: 341
|
| Posted: Wed Mar 22, 2006 10:10 pm Post subject: |
|
|
If you can boot windows you can look at Device Manager - IDE ATA ATAPI Controllers and check the properties of the listed devices or you can run winmsd - Hardware Resources - I/O and see what is using those ports.
jeff |
|
| Back to top |
|
|
XrateR
Apprentice
Joined: 18 Nov 2005
Posts: 164
Location: Sweden
|
| Posted: Thu Mar 23, 2006 7:59 pm Post subject: |
|
|
I have done that now. But I did not see anything of intrest.
All I notice was that all ports was different. |
|
| Back to top |
|
|
XrateR
Apprentice
Joined: 18 Nov 2005
Posts: 164
Location: Sweden
|
| Posted: Thu Mar 23, 2006 8:22 pm Post subject: |
|
|
I can now find them on a livecd so I gues it is some thing in the kernel.
That I need to fix. I will look on it now and see if I can fix it. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
