View previous topic :: View next topic |
Author |
Message |
ibbumpin n00b
Joined: 05 Mar 2005 Posts: 22 Location: Chicago
|
Posted: Fri Apr 07, 2006 12:25 am Post subject: Re Well, |
|
|
Ahh sorry I tried it with the 'ati' and 'radeon' drivers in my xorg.conf file and both now work for me. I have ATI framebuffer support compiled into the kernel as well. I'm on gentoo-sources kernel 2.6.15-r. I will upgrade to 2.6.16 for the wireless soon. Well good luck I'll post more info about my config when I get back home.
Matt _________________ "I don't wanna large farva! I want a God damn liter'a'cola!" - R. Farva |
|
Back to top |
|
|
sarumont Tux's lil' helper
Joined: 31 Oct 2002 Posts: 94 Location: /dev/urandom
|
Posted: Fri Apr 07, 2006 2:29 pm Post subject: |
|
|
Here is my output:
http://www.sigil.org/~sarumont/xglerrors
Looks like it is having issues with DRM (go figure). I will try taking it out of my kernel and post back in a few....
OT: ibbumpin: you using softmac or the dscape for your wireless? I can bring the card up with dscape, but iwconfig will not do jack to it (as far as setting essid, key, etc.). Will probably try updating shortly and, if all else fails, softmac. _________________ ~Sarumont
"Time is an illusion. Lunchtime doubly so." |
|
Back to top |
|
|
sarumont Tux's lil' helper
Joined: 31 Oct 2002 Posts: 94 Location: /dev/urandom
|
Posted: Fri Apr 07, 2006 2:49 pm Post subject: |
|
|
After removing DRI from the kernel, here we are:
http://www.sigil.org/~sarumont/morexglsuck
It still looks like it is having issues with finding 'radeon', but straight up X has no problems. I start fine and can run glxinfo/glxgears with no problems. glxgears *does*, however, seem to be slower than it was when I was using the kernel's radeon driver.
I'll dig a bit deeper sometime later...have to work for now. _________________ ~Sarumont
"Time is an illusion. Lunchtime doubly so." |
|
Back to top |
|
|
ibbumpin n00b
Joined: 05 Mar 2005 Posts: 22 Location: Chicago
|
Posted: Sat Apr 08, 2006 2:31 am Post subject: I broked it again |
|
|
Some how I broke my DRI because now when I run glxinfo i get the error:
Code: |
R300 DRI dirver expected DRM version 1.24.x but got version 1.20.0
|
I'm not sure how the versions got messed up. Has anyone run into this recently. I found a few threads on this but all the attempts to update the DRI driver has failed. I reemerged libdrm and and mesa but I still get nothing but the same error. This is frustrating
Well atleast I had DRI for a day
Any thoughts? _________________ "I don't wanna large farva! I want a God damn liter'a'cola!" - R. Farva |
|
Back to top |
|
|
Valkura Apprentice
Joined: 27 Feb 2006 Posts: 242 Location: Ramsey, MN
|
Posted: Sat Apr 08, 2006 3:04 am Post subject: |
|
|
No idea what is up with your DRI.... mine is still sitting XGL-less.... Gotta go look at those Ubuntu forums! _________________ last.fm
SFH, because it's awesome |
|
Back to top |
|
|
ibbumpin n00b
Joined: 05 Mar 2005 Posts: 22 Location: Chicago
|
Posted: Sat Apr 08, 2006 8:23 pm Post subject: I'm stuck... |
|
|
I really can't figure out how to get the DRM version to match. I can't find what file(s) I need to replace. I have removedand reemerged libdrm, x11-drm, xorg-server, mesa. I'm not sure why the mismatch occurs. Must be a bug in the current portage tree. I think this is the only problem I am having as I get not other "out of the ordinary" warnings.
When I was messing with it I did start getting X11 warnings that DRI couldn't load be cause the driver was old...reemergeing xrg-server fixed this issue though.
I guess I'll check the ubuntu forums now
Anyone got any ideas?
Matt _________________ "I don't wanna large farva! I want a God damn liter'a'cola!" - R. Farva |
|
Back to top |
|
|
ibbumpin n00b
Joined: 05 Mar 2005 Posts: 22 Location: Chicago
|
Posted: Sat Apr 08, 2006 9:16 pm Post subject: w00t |
|
|
Okay... after the Ubuntu forums were of no help (no surprise) I did the following...
I went into /etc/portage/package.unmask and removed 'x11-libs/libdrm', and 'media-libs/mesa'.
This made me down grade to mesa=6.4.2-r3 and I still have libdrm-2.1_apha20060313
I then did to unload the modules and ran 'startx'.
Now I have Direct Rendering enabled again!! When I run Xgl it doesn't crash anymore but It doesn't work yet...I don't think I have it configured so that is a different story
I hope my struggles have helped someone...let me know if you want me to post more info.
Matt _________________ "I don't wanna large farva! I want a God damn liter'a'cola!" - R. Farva |
|
Back to top |
|
|
Valkura Apprentice
Joined: 27 Feb 2006 Posts: 242 Location: Ramsey, MN
|
Posted: Sat Apr 08, 2006 9:37 pm Post subject: Re: w00t |
|
|
ibbumpin wrote: | Okay... after the Ubuntu forums were of no help (no surprise)
|
Yeah, I looked, found nothing! Weird (I know something was there once).
Quote: |
I did the following...
I went into /etc/portage/package.unmask and removed 'x11-libs/libdrm', and 'media-libs/mesa'.
This made me down grade to mesa=6.4.2-r3 and I still have libdrm-2.1_apha20060313
I then did to unload the modules and ran 'startx'.
Now I have Direct Rendering enabled again!! When I run Xgl it doesn't crash anymore but It doesn't work yet...I don't think I have it configured so that is a different story
I hope my struggles have helped someone...let me know if you want me to post more info.
Matt |
I am now trying that....mine is emerging mesa 6.4.2-r2...hmm.
EDIT: Nope, still doesn't work. I get the errors:
Code: | (something along the lines of FBDEV: FBIOBLANK: invalid argument) |
and
Code: | no visual format found |
Argh! _________________ last.fm
SFH, because it's awesome |
|
Back to top |
|
|
ibbumpin n00b
Joined: 05 Mar 2005 Posts: 22 Location: Chicago
|
Posted: Sat Apr 08, 2006 9:57 pm Post subject: hmmm... |
|
|
Have you tried the 'radeon' or 'ati' drivers?'
Instead of Code: | Option UseFBDev "true" | I have the line
Code: | Option "MergedFB" "true" |
I had troubles with FBDev. _________________ "I don't wanna large farva! I want a God damn liter'a'cola!" - R. Farva |
|
Back to top |
|
|
Valkura Apprentice
Joined: 27 Feb 2006 Posts: 242 Location: Ramsey, MN
|
Posted: Sun Apr 09, 2006 12:58 am Post subject: Re: hmmm... |
|
|
ibbumpin wrote: | Have you tried the 'radeon' or 'ati' drivers?'
Instead of Code: | Option UseFBDev "true" | I have the line
Code: | Option "MergedFB" "true" |
I had troubles with FBDev. |
Which section? I don't have a UseFBDev option FBDev is the only driver that gives me the resolution of my screen in normal X - radeon gives me 640x480 for some reason _________________ last.fm
SFH, because it's awesome |
|
Back to top |
|
|
ibbumpin n00b
Joined: 05 Mar 2005 Posts: 22 Location: Chicago
|
Posted: Sun Apr 09, 2006 1:01 am Post subject: Re: Which section |
|
|
Sorry I put those options in the video card device section...
I will post my xorg.conf soon... _________________ "I don't wanna large farva! I want a God damn liter'a'cola!" - R. Farva |
|
Back to top |
|
|
Valkura Apprentice
Joined: 27 Feb 2006 Posts: 242 Location: Ramsey, MN
|
Posted: Sun Apr 09, 2006 4:05 am Post subject: Re: Which section |
|
|
ibbumpin wrote: | Sorry I put those options in the video card device section...
I will post my xorg.conf soon... |
Cool thanks! I will go see if it works. _________________ last.fm
SFH, because it's awesome |
|
Back to top |
|
|
ibbumpin n00b
Joined: 05 Mar 2005 Posts: 22 Location: Chicago
|
Posted: Sun Apr 09, 2006 5:59 am Post subject: Here is my xorg.conf file |
|
|
Though it's not all clean a pretty here is my xorg.conf file...
Code: |
Section "ServerLayout"
Identifier "DRI"
Screen 0 "ScreenDRI" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Touchpad" "AlwaysCore"
InputDevice "Powerbook Keyboard" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "noDRI"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Powerbook Keyboard" "CoreKeyboard"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
#InputDevice "Powerbook Keyboard" "CoreKeyboard"
InputDevice "Powerbook Keyboard" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/urw-fonts/"
FontPath "/usr/share/fonts/TTF/"
#FontPath "/usr/share/fonts/Speedo/"
FontPath "/usr/share/fonts/Type1/"
#FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
#Load "bitmap"
#Load "ati"
#Load "radeon"
Load "synaptics"
Load "dbe"
Load "drm"
Load "dri"
Load "extmod"
Load "freetype"
#Load "GLcore"
Load "glx"
Load "int10"
Load "record"
#Load "speedo"
Load "type1"
Load "xtrap"
EndSection
Section "Extensions"
Option "Composite" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Powerbook Keyboard"
Driver "kbd"
Option "XkbModel" "pc105"
#Option "XkbLayout" "gb_g4_alubook_dvorak+compose(rwin)"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "LeftEdge" "60"
Option "RightEdge" "850"
Option "TopEdge" "60"
Option "BottomEdge" "511"
Option "MinSpeed" "0.4"
Option "MaxSpeed" "1"
Option "MaxTapMove" "10"
Option "MaxTapTime" "100"
Option "AccelFactor" "0.07"
Option "SHMConfig" "on"
Option "RTCornerButton" "3"
Option "LTCornerButton" "2"
Option "HorizScrollDelta" "0"
Option "VertScrollDelta" "30"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "5"
EndSection
Section "InputDevice"
Identifier "Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Powerbook LCD"
VendorName "Apple"
ModelName ""
UseModes "Modes0"
HorizSync 30-70
VertRefresh 50-160
EndSection
Section "Device"
Identifier "Card0"
Driver "ati"
BusID "PCI:0:16:0"
EndSection
Section "Device"
Identifier "CardDRI"
VendorName "ATI Technologies Inc"
BoardName "RV350 [Mobility Radeon 9600 M10]"
Driver "radeon"
BusID "PCI:0:16:0"
Option "AGPMode" "4" # <i>
#Option "UseFBDev" "On" # [<bool>]
Option "RenderAccel" "true"
Option "CRT2Position" "Clone"
Option "AGPFastWrite" "true"
Option "EnablePageFlip" "true"
Option "backingstore"
Option "MergedFB" "true"
Option "UseFWPLL" "true"
Option "MetaModes" "1280x854 1152x864 1024x786 800x600"
Option "CloneMode" "1024x768"
#Option "DMAForXV" "true" # [<bool>]
#Option "XaaNoScanlineImageWriteRect"
#Option "XaaNoScanlineCPUToScreenColorExpandFill"
Option "AccelMethod" "exa"
EndSection
Section "Screen"
Identifier "ScreenDRI"
Device "CardDRI"
#Device "Card0"
Monitor "Powerbook LCD"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1280x854" "800x600" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1280x854" "800x600" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x854" "800x600" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1280x854" "800x600" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x854" "800x600" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x854" "800x600" "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Powerbook LCD"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1280x854" "800x600" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1280x854" "800x600" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x854" "800x600" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1280x854" "800x600" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x854" "800x600" "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x854" "800x600" "1024x768"
EndSubSection
EndSection
Section "Modes"
Identifier "Modes0"
# mode generated by Xeasyconf
Modeline "1280x854" 79.815 1280 1296 1408 1536 854 855 858 866 -HSync -VSync
EndSection
Section "DRI"
Mode 0666
EndSection
|
It works with the DVI output mirroring when X is running. You may also want to try messing with the resolutions in the 'Screen' section. I added the resolutions there and they work for me.
Our systems may be a little different I imagine but I hope this or some of it helps you out. I am on a Powerbook G4 15" 1.67Ghz 512MB Radeon 9700 64MB
Both the 'ati' and 'radeon' drivers give me nearly identical results (I say nearly because I haven't stress tested either but they look the same and provide the same features "at a glance" )
After starting X my 'lsmod' gives me:
Code: |
Module Size Used by
radeon 121704 1
drm 86556 2 radeon
uhci_hcd 44272 0
snd_powermac 49280 0
snd_pcm 103044 1 snd_powermac
snd_timer 27460 1 snd_pcm
snd 67604 3 snd_powermac,snd_pcm,snd_timer
snd_page_alloc 11720 1 snd_pcm
bcm43xx 121452 0
ieee80211softmac 28288 1 bcm43xx
ieee80211 37032 2 bcm43xx,ieee80211softmac
ieee80211_crypt 7040 1 ieee80211
|
Good luck man!
Matt _________________ "I don't wanna large farva! I want a God damn liter'a'cola!" - R. Farva |
|
Back to top |
|
|
|