Barrell
n00b
Joined: 14 Apr 2006
Posts: 1
|
 Posted: Fri Apr 14, 2006 4:13 pm Post subject: PCMCIA AverTV hybrid+FM (need your advice) |
 |
|
Good day everyone. Couple of days ago i got an AverTV hybrid+FM PCMCIA card from friend but still can't get it to work.
I've tried to set it up by this wiki's: http://gentoo-wiki.com/HARDWARE_saa7134 , http://www.linuxtv.org/v4lwiki/index.php/AVerMedia_Cardbus_E500
module saa7134 could not detect my card automatically:
| Code: | Apr 15 18:02:16 Barrell ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169
Apr 15 18:02:16 Barrell saa7133[0]: found at 0000:02:00.0, rev: 209, irq: 169, latency: 64, mmio: 0x32000000
Apr 15 18:02:16 Barrell saa7133[0]: subsystem: 1461:f436, board: UNKNOWN/GENERIC [card=0,autodetected]
Apr 15 18:02:16 Barrell saa7133[0]: board init: gpio is effffff
Apr 15 18:02:16 Barrell saa7133[0]: i2c eeprom 00: 61 14 36 f4 00 00 00 00 00 00 00 00 00 00 00 00
Apr 15 18:02:16 Barrell saa7133[0]: i2c eeprom 10: 00 ff e2 0e ff 20 ff ff ff ff ff ff ff ff ff ff
Apr 15 18:02:16 Barrell saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 ff ff ff ff ff
Apr 15 18:02:16 Barrell saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:02:16 Barrell saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
Apr 15 18:02:16 Barrell saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:02:16 Barrell saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:02:16 Barrell saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:02:16 Barrell saa7133[0]: registered device video0 [v4l2]
Apr 15 18:02:16 Barrell saa7133[0]: registered device vbi0
Apr 15 18:02:16 Barrell saa7134 ALSA driver for DMA sound loaded
Apr 15 18:02:16 Barrell saa7133[0]/alsa: saa7133[0] at 0x32000000 irq 169 registered as card -1
|
so i've tried to add some module parameters "card=46" (46 - AverTV cardbus plus, i guess it's the most similar card to mine. After adding this parameter the light on card switches on) and "tuner=""" (tried almost all available values but still my tuner was unrecognizable)
| Code: | Apr 15 18:00:04 Barrell ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169
Apr 15 18:00:04 Barrell saa7133[0]: found at 0000:02:00.0, rev: 209, irq: 169, latency: 0, mmio: 0x32000000
Apr 15 18:00:04 Barrell PCI: Setting latency timer of device 0000:02:00.0 to 64
Apr 15 18:00:04 Barrell saa7133[0]: subsystem: 1461:f436, board: AVerMedia Cardbus TV/Radio (E500) [card=46,insmod option]
Apr 15 18:00:04 Barrell saa7133[0]: board init: gpio is 220000
Apr 15 18:00:04 Barrell saa7133[0]: i2c eeprom 00: 61 14 36 f4 00 00 00 00 00 00 00 00 00 00 00 00
Apr 15 18:00:04 Barrell saa7133[0]: i2c eeprom 10: 00 ff e2 0e ff 20 ff ff ff ff ff ff ff ff ff ff
Apr 15 18:00:04 Barrell saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 ff ff ff ff ff
Apr 15 18:00:04 Barrell saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:00:04 Barrell saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
Apr 15 18:00:04 Barrell saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:00:04 Barrell saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:00:04 Barrell saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:00:04 Barrell saa7133[0]: registered device video0 [v4l2]
Apr 15 18:00:04 Barrell saa7133[0]: registered device vbi0
Apr 15 18:00:04 Barrell saa7133[0]: registered device radio0
|
My last hope to get this card working was the most recent V4L CVS drivers...
After loading renewed modules with the same parameters i got this output:
| Code: | Apr 15 18:05:02 Barrell saa7130/34: v4l2 driver version 0.2.14 loaded
Apr 15 18:05:02 Barrell ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169
Apr 15 18:05:02 Barrell saa7133[0]: found at 0000:02:00.0, rev: 209, irq: 169, latency: 64, mmio: 0x32000000
Apr 15 18:05:02 Barrell saa7133[0]: subsystem: 1461:f436, board: AVerMedia Cardbus TV/Radio (E500) [card=46,insmod option]
Apr 15 18:05:02 Barrell saa7133[0]: board init: gpio is effffff
Apr 15 18:05:02 Barrell tuner 4-0061: chip found @ 0xc2 (saa7133[0])
Apr 15 18:05:02 Barrell tuner 4-0061: setting tuner address to 61
Apr 15 18:05:02 Barrell tuner 4-0061: type set to tda8290+75
Apr 15 18:05:02 Barrell saa7133[0]: i2c eeprom 00: 61 14 36 f4 00 00 00 00 00 00 00 00 00 00 00 00
Apr 15 18:05:02 Barrell saa7133[0]: i2c eeprom 10: 00 ff e2 0e ff 20 ff ff ff ff ff ff ff ff ff ff
Apr 15 18:05:02 Barrell saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 ff ff ff ff ff
Apr 15 18:05:02 Barrell saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:05:02 Barrell saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
Apr 15 18:05:02 Barrell saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:05:02 Barrell saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:05:02 Barrell saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 15 18:05:03 Barrell saa7133[0]: registered device video0 [v4l2]
Apr 15 18:05:03 Barrell saa7133[0]: registered device vbi0
Apr 15 18:05:03 Barrell saa7133[0]: registered device radio0
|
As far as i understand tuner seems to be initialized but the card remains to be unusable (tvtime-scanner can't find any channels, fm radio application (gqradio) shows error "Failed to initialize radio device")
I hope someone has this device (or at least something similar). I just don't have anymore ideas how to get it working so all your ideas or thoughts are welcome.
I'm using Acer Aspire 1522LM with amd64. Gentoo 2005.1 kernel-2.6.16-gentoo-r2 (~amd64)
Thanks for your help |
|
Kernel & Hardware
