| View previous topic :: View next topic |
| Author |
Message |
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
 Posted: Fri Apr 28, 2006 6:44 pm Post subject: [usb] je n'arrive plus a monter mes clés USB ... |
 |
|
Bonjour,
voila j'ai fait une mise a jours de ma gentoo et depuis impossible de monter une clé USB, /DEV/sdaX n'existe pas ... c'est un fichier qui est crée par udev d'aprés ce que j'ai compris, j'ai donc fait des recherche et j'ai vu qu'une personne avec eu le meme pb en metant sa machine a jour.
Comme lui, le paquet sys-fs/udev c'est mis a la version 0.87 je crois. Il a réussi a resoudre le pb en remettant l'ancienne version de udev 0.79-r1, j'ai tenté la meme manip mais cela ne fonction pas ...
Pouvez vous m'aidez .??
merci d'avance
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
 |
PabOu
Veteran
Joined: 11 Feb 2004
Posts: 1088
Location: Namur - Belgium
|
| Posted: Fri Apr 28, 2006 6:48 pm Post subject: Re: [usb] je n'arrive plus a monter mes clés USB ... |
|
|
Salut !
| driden91 wrote: | | /DEV/sdaX n'existe pas |
Normal, c'est sensible à la casse.. donc c'est /dev/sdaX et le X est à remplacer par un chiffre (voir dmesg pour savoir lequel exactement) ... plaisanterie à part, lors de ta mise à jour, tu as changé de kernel ?
_________________
Mangez du poulet ! |
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Fri Apr 28, 2006 6:53 pm Post subject: |
|
|
nan je n'ai pas changé de noyeu vu que c'est une nouvelle install . gentoo-2.6.16-r3 ...
quand je fait la commande lspci je ne vois bien mes infos concernant les ports USB .
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
|
PabOu
Veteran
Joined: 11 Feb 2004
Posts: 1088
Location: Namur - Belgium
|
| Posted: Fri Apr 28, 2006 6:57 pm Post subject: |
|
|
Et depuis la nouvelle install, ca à déjà fonctionné ?
_________________
Mangez du poulet ! |
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Fri Apr 28, 2006 7:01 pm Post subject: |
|
|
oui oui, j'ai même fait le how to pour hal , afin de les monter automatiquement ...
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
|
PabOu
Veteran
Joined: 11 Feb 2004
Posts: 1088
Location: Namur - Belgium
|
| Posted: Fri Apr 28, 2006 7:11 pm Post subject: |
|
|
quel message donne le kernel quand tu branches une clé usb ? (tu branche ta clé, tu attends 5 secondes et puis tu peux le voir avec dmesg, ce sont les dernières lignes)
_________________
Mangez du poulet ! |
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Fri Apr 28, 2006 7:19 pm Post subject: |
|
|
voila le resultat de dmesg
| Code: | driden # dmesg
Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 111
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 349
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 59
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 103
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 360
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 36
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 1, Code: 330, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 1, Code: 325, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: new high speed USB device using ehci_hcd and address 47
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: device descriptor read/64, error -71
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 1, Code: 330, Value: 1
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 499
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 423
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 70
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 1, Code: 325, Value: 1
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 491
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 479
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 72
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 465
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 424
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 73
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 448
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 425
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 74
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 429
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 426
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 411
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 66
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 398
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 425
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 70
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 387
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 419
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 380
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 407
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 73
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 373
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 384
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 70
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 370
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 364
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 76
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 346
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 69
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 323
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 71
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
usb 1-2: device descriptor read/64, error -71
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 379
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 279
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 78
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 389
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 245
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 392
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 236
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 394
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 229
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 78
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 395
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 224
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 221
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 78
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 220
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 394
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 393
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 392
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 391
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 219
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 75
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 390
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 218
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 73
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 389
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 216
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 71
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
usb 1-2: new high speed USB device using ehci_hcd and address 48
ehci_hcd 0000:00:02.2: devpath 2 ep0out 3strikes
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 387
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 213
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 68
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 386
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 210
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 74
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 384
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 205
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 78
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 381
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 199
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 378
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 191
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 78
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 371
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 174
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 73
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 368
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 167
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 67
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 367
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 159
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 76
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 366
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 152
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 78
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 142
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 83
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 131
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 80
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 119
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 111
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 76
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 105
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 100
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 75
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 97
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 78
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
ehci_hcd 0000:00:02.2: devpath 2 ep0out 3strikes
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 94
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 365
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 79
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 364
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
usb 1-2: device not accepting address 48, error -71
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 87
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 95
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 86
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
usb 1-2: new high speed USB device using ehci_hcd and address 49
ehci_hcd 0000:00:02.2: devpath 2 ep0out 3strikes
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 96
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 97
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 98
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 83
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 99
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 80
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 100
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 365
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 78
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 101
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 366
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 76
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 367
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 102
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 75
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 368
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 103
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 79
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
ehci_hcd 0000:00:02.2: devpath 2 ep0out 3strikes
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 369
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 85
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 370
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 104
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 84
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 371
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 105
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 82
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 373
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 106
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 80
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 375
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 108
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 76
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 378
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 111
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 75
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 380
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 113
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 383
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 116
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 386
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 120
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 78
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 389
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 124
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 79
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 392
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 128
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 78
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 395
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 132
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 397
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 136
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 400
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 139
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 403
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 143
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 407
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 147
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 412
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 152
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
usb 1-2: device not accepting address 49, error -71
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 418
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 156
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 425
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 160
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 433
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 163
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 441
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 166
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 74
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 451
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 169
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 70
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 460
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 172
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 68
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 470
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 176
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 64
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 482
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 179
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 66
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 497
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 184
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 69
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 511
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 188
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 72
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 528
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 194
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 73
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 544
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 201
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 69
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 559
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 209
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 64
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 573
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 218
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 58
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 587
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 229
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 67
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 601
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 242
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 60
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 613
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 259
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 49
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 624
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 277
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 56
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 634
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 296
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 57
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 643
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 315
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 56
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 649
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 332
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 52
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 653
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 343
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 45
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 1, Code: 330, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 654
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 352
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 16
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 1, Code: 325, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 1, Code: 330, Value: 1
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 0, Value: 378
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 1, Value: 231
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 77
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 1, Code: 325, Value: 1
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 69
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 61
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 53
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 30
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 1, Code: 330, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 3, Code: 24, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 1, Code: 325, Value: 0
evbug.c: Event. Dev: isa0060/serio4/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 4, Code: 4, Value: 200
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 1, Code: 103, Value: 1
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 4, Code: 4, Value: 200
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 1, Code: 103, Value: 0
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 4, Code: 4, Value: 28
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 1, Code: 28, Value: 1
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 4, Code: 4, Value: 28
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 1, Code: 28, Value: 0
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 0, Code: 0, Value: 0
hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001002 POWER sig=se0 CSC
hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 4, Code: 4, Value: 200
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 1, Code: 103, Value: 1
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 0, Code: 0, Value: 0
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 4, Code: 4, Value: 200
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 1, Code: 103, Value: 0
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 0, Code: 0, Value: 0
usb 1-2: new high speed USB device using ehci_hcd and address 50
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: device descriptor read/64, error -71
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 4, Code: 4, Value: 28
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 1, Code: 28, Value: 1
evbug.c: Event. Dev: isa0060/serio0/input0, Type: 0, Code: 0, Value: 0
|
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Fri Apr 28, 2006 9:11 pm Post subject: |
|
|
?? personne pour m'aider sniff...
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
|
Ey
l33t
Joined: 07 Apr 2005
Posts: 863
Location: Paris
|
| Posted: Fri Apr 28, 2006 11:18 pm Post subject: Re: [usb] je n'arrive plus a monter mes clés USB ... |
|
|
| Un petit lsusb te donne quoi ? (c'est dans le package usbutils si tu ne l'as pas déjà) |
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Sat Apr 29, 2006 12:09 am Post subject: |
|
|
voila le resultat ... mes ports USB sont bien detecté mais je n'ai pas de fichier /dev/sdX ...
| Code: | localhost driden # lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
|
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
|
Ey
l33t
Joined: 07 Apr 2005
Posts: 863
Location: Paris
|
| Posted: Sat Apr 29, 2006 12:27 am Post subject: |
|
|
| driden91 wrote: | | voila le resultat ... mes ports USB sont bien detecté mais je n'ai pas de fichier /dev/sdX ... |
En fait l'erreur à l'air d'être en amont de usb-storage... Au niveau de l'USB2 (ehci) il fait un error -71 qui me plait pas... Faut voir à quoi ça correspond
EDIT : en fait en regardant d'un peut plus près c'est même pas l'ehci qui fait une bettise mais le "hub" |
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Sat Apr 29, 2006 12:35 am Post subject: |
|
|
comment corriger ca ?
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
|
Ey
l33t
Joined: 07 Apr 2005
Posts: 863
Location: Paris
|
| Posted: Sat Apr 29, 2006 12:40 am Post subject: |
|
|
| Juste pour info t'as mis quoi comme HCD en dehors de EHCI ? Parce que l'erreur en fait c'est EPROTO qui signifie en gros que le message reçu par le hub est pas compatible avec le protocole... |
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Sat Apr 29, 2006 12:41 am Post subject: |
|
|
j'ai mis OHCI, UHCI, et EHCI
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
|
Ey
l33t
Joined: 07 Apr 2005
Posts: 863
Location: Paris
|
| Posted: Sat Apr 29, 2006 12:51 am Post subject: |
|
|
Parce que si tu vires les lignes concernant evdev qui nous intéresse pas là, tu as ça :
| Code: | driden # dmesg
Code: 0, Value: 0
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: new high speed USB device using ehci_hcd and address 47
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: device descriptor read/64, error -71
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: device descriptor read/64, error -71
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: new high speed USB device using ehci_hcd and address 48
ehci_hcd 0000:00:02.2: devpath 2 ep0out 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0out 3strikes
usb 1-2: device not accepting address 48, error -71
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: new high speed USB device using ehci_hcd and address 49
ehci_hcd 0000:00:02.2: devpath 2 ep0out 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0out 3strikes
usb 1-2: device not accepting address 49, error -71
hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001002 POWER sig=se0 CSC
hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: new high speed USB device using ehci_hcd and address 50
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: port 2 high speed
ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
usb 1-2: device descriptor read/64, error -71
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes
ehci_hcd 0000:00:02.2: devpath 2 ep0in 3strikes |
et l'erreur en fait est dans /usr/src/linux/drivers/usb/host/ehci-q.c : (je te fais grace du code je mets juste les commentaires qui sont sur le chemin critique :
| Code: | /* count IN/OUT bytes, not SETUP (even short packets) */
/* don't modify error codes */
/* force cleanup after short read; not always an error */
/* serious "can't proceed" faults reported by the hardware */
/* timeout, bad crc, wrong PID, etc; retried */
|
Donc en gros y a 3 possibilités :
- ton token déconne
- il est reconnu comme USB2 (ehci) mais il n'est pas USB2
- le module ehci est buggé...
EDIT : a oui aussi pour la petite histoire je vais juste traduire les logs en français :
en gros il essaie d'attribuer une addresse au token et le token veut pas (en gros soit timeout soit message incohérent renvoyé par le token) |
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Sat Apr 29, 2006 12:55 am Post subject: |
|
|
le truc c'est que j'ai un port USB2 et 2 ports USB1
tu crois que si j'enleve le module Ehci dans le noyeau ca peut arranger mon problème ?
ce qui est bizzare c'est que tout marchait trés bien jusqu'a ce que je fasse un emerge --newuse wolrd qui m'a changer la version de udev (je suis passé de 0.79-r1 a la 0.87)
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine....
Last edited by driden91 on Sat Apr 29, 2006 12:58 am; edited 1 time in total |
|
| Back to top |
|
|
Ey
l33t
Joined: 07 Apr 2005
Posts: 863
Location: Paris
|
| Posted: Sat Apr 29, 2006 12:58 am Post subject: |
|
|
| driden91 wrote: | | j'ai mis OHCI, UHCI, et EHCI |
Et un petit lspci renvoie quoi de bien concernant le controleur usb ? |
|
| Back to top |
|
|
Ey
l33t
Joined: 07 Apr 2005
Posts: 863
Location: Paris
|
| Posted: Sat Apr 29, 2006 12:59 am Post subject: |
|
|
| driden91 wrote: | | le truc c'est que j'ai un port USB2 et 2 ports USB1 |
Il se passe quoi quand tu le mets dans un port USB1 ? |
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Sat Apr 29, 2006 1:00 am Post subject: |
|
|
voila le resultat :
| Code: | driden # lspci
00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
[color=red]00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)[/color]
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
00:06.1 Modem: nVidia Corporation nForce3 Audio (rev a2)
00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go 32M] (rev a3)
02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
02:04.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
02:04.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
02:04.2 System peripheral: Texas Instruments PCI1620 Firmware Loading Function (rev 01)
|
Ps j'ai édité mon message précèdent
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
|
Ey
l33t
Joined: 07 Apr 2005
Posts: 863
Location: Paris
|
| Posted: Sat Apr 29, 2006 1:00 am Post subject: |
|
|
| driden91 wrote: | | ce qui est bizzare c'est que tout marchait trés bien jusqu'a ce que je fasse un emerge --newuse wolrd qui m'a changer la version de udev (je suis passé de 0.79-r1 a la 0.87) |
C'est pas lié au package udev qui ne contient pas la partie noyau de udev hors là c'est définitivement dans le noyau que quelquechose se passe mal... |
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Sat Apr 29, 2006 1:02 am Post subject: |
|
|
| Ey wrote: | | driden91 wrote: | | le truc c'est que j'ai un port USB2 et 2 ports USB1 |
Il se passe quoi quand tu le mets dans un port USB1 ? |
le résultat est le meme quel que soit le port USB utilisé
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
|
Ey
l33t
Joined: 07 Apr 2005
Posts: 863
Location: Paris
|
| Posted: Sat Apr 29, 2006 1:06 am Post subject: |
|
|
Fait un petit | Code: | | zgrep EHCI /proc/config.gz |
pour vérifier ce qu'il y a sur le root hub.
Sinon depuis ta mise à jour de world tu n'as pas mis à jour ton noyau ? C'est bizarre que sans intervention sur le noyau il se mette à déconner de la sorte du jour au lendemain |
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Sat Apr 29, 2006 1:08 am Post subject: |
|
|
tu es sur de ta commande ? par ce que j'ai pas de resultat :
| Code: | zgrep EHCI /proc/config.gz
gzip: /proc/config.gz: No such file or directory
|
Et j'ai également fait des modif au niveaux du noyea pour avoir le support de l'IPod ...
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
|
Ey
l33t
Joined: 07 Apr 2005
Posts: 863
Location: Paris
|
| Posted: Sat Apr 29, 2006 1:16 am Post subject: |
|
|
| driden91 wrote: | | Code: | zgrep EHCI /proc/config.gz
gzip: /proc/config.gz: No such file or directory
|
|
T'as pas mis le support pour le config.gz dans le noyau en fait...
bon alors tu fais un | Code: | | grep EHCI /usr/src/linux/.config |
|
|
| Back to top |
|
|
driden91
Apprentice
Joined: 26 Jul 2004
Posts: 232
Location: paris
|
| Posted: Sat Apr 29, 2006 1:17 am Post subject: |
|
|
voila le resultat :
| Code: | driden # grep EHCI /usr/src/linux/.config
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
|
_________________
l'ange des tenebres vit la lumiere au fond de la nature humaine.... |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
French
