| View previous topic :: View next topic |
| Author |
Message |
__g_blade
Tux's lil' helper
Joined: 13 Jan 2006
Posts: 101
Location: paderborn, germany
|
 Posted: Thu May 25, 2006 9:23 am Post subject: [solved] ALSA Probleme |
 |
|
So Leute, ich bin schon nah am Verzweifeln, also bitte einige helfende Zeilen zu meinem Problem
ALSA sound ist total verzerrt.. In Musik und Videos höre ich Instrumental in voller Lautstärke die Stimmen aber sind total runter klingen hallend und problematisch halt.
Das ganze hat früher funktioniert, erst mit einigen emerges und Versuchen mit dmixer spinnt er.. Hab schon x-ten Mal neu kompiliert und probiert
und alsaconf stirbt jedesmal wenn ich es aufrufe
| Code: |
omerta ~ # lsmod
Module Size Used by
snd_seq 41392 0
snd_via82xx 20116 1
snd_ac97_codec 79328 1 snd_via82xx
snd_ac97_bus 2304 1 snd_ac97_codec
snd_pcm 62340 3 snd_via82xx,snd_ac97_codec
snd_timer 16772 2 snd_seq,snd_pcm
snd_page_alloc 7304 2 snd_via82xx,snd_pcm
snd_mpu401_uart 6016 1 snd_via82xx
snd_rawmidi 16448 1 snd_mpu401_uart
snd_seq_device 5640 1 snd_rawmidi
snd 35060 9 snd_seq,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 7072 1 snd
fglrx 451200 0
via_agp 7744 1
agpgart 23372 2 fglrx,via_agp
|
| Code: |
omerta ~ # lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
|
| Code: |
omerta ~ # eix alsa
* games-emulation/mupen64-alsasnd
Available versions: 0.4
Installed: none
Homepage: http://www.emutalk.net/showthread.php?threadid=16895
Description: Alsa plugin for the mupen64 N64 emulator
* mail-client/balsa
Available versions: 1.4.3 2.0.15-r2 2.2.6-r3 2.2.6-r4 2.3.4-r1 2.3.8
Installed: none
Homepage: http://balsa.gnome.org
Description: Email client for GNOME
* media-libs/alsa-lib
Available versions: 1.0.10 1.0.11
Installed: 1.0.11
Homepage: http://www.alsa-project.org/
Description: Advanced Linux Sound Architecture Library
* media-libs/alsa-oss
Available versions: 1.0.10-r1 1.0.11
Installed: none
Homepage: http://www.alsa-project.org/
Description: Advanced Linux Sound Architecture OSS compatibility layer.
* media-libs/libclalsadrv
Available versions: 1.0.1
Installed: none
Homepage: http://users.skynet.be/solaris/linuxaudio
Description: An audio library by Fons Adriaensen <fons.adriaensen@skynet.be>
* media-plugins/alsa-jack
Available versions: 1.0.10_rc1 1.0.10 1.0.11
Installed: none
Homepage: http://www.alsa-project.org/
Description: JACK pcm plugin. Allows native ALSA applications to connect to the jackd. Works transparantly for both capture and playback.
* media-plugins/alsa-plugins
Available versions: 1.0.11
Installed: 1.0.11
Homepage: http://www.alsa-project.org/
Description: ALSA extra plugins
* media-plugins/gst-plugins-alsa
Available versions: 0.8.8 0.8.9 0.8.10 0.8.11 0.8.12 0.10.4 0.10.6 0.10.7
Installed: 0.10.7
Homepage: http://gstreamer.freedesktop.org/modules/gst-plugins.html
Description: plugin for gstreamer
* media-plugins/xmms-alsa
Available versions: 1.2.10 1.2.10-r1 1.2.10-r2 1.2.10-r3
Installed: 1.2.10-r3
Homepage: http://www.xmms.org
Description: Xmms Plugin: xmms-alsa
* media-sound/alsa-driver
Available versions: 1.0.10-r2 1.0.11
Installed: none
Homepage: http://www.alsa-project.org/
Description: Advanced Linux Sound Architecture kernel modules
* media-sound/alsa-firmware
Available versions: 1.0.8-r1 1.0.10 1.0.11
Installed: none
Homepage: http://www.alsa-project.org/
Description: Advanced Linux Sound Architecture firmware
* media-sound/alsa-headers
Available versions: 1.0.10 1.0.11
Installed: 1.0.11
Homepage: http://www.alsa-project.org/
Description: Header files for Advanced Linux Sound Architecture kernel modules
* media-sound/alsa-patch-bay
Available versions: 1.0.0-r1 1.0.0-r2
Installed: none
Homepage: http://pkl.net/~node/software/alsa-patch-bay/
Description: Graphical patch bay for the ALSA sequencer API.
* media-sound/alsa-tools
Available versions: 1.0.10 1.0.11
Installed: 1.0.11
Homepage: http://www.alsa-project.org
Description: Advanced Linux Sound Architecture tools
* media-sound/alsa-utils
Available versions: 1.0.9a 1.0.10 1.0.11
Installed: 1.0.11
Homepage: http://www.alsa-project.org/
Description: Advanced Linux Sound Architecture Utils (alsactl, alsamixer, etc.)
* media-sound/alsamixergui
Available versions: 0.9.0.1.2-r4
Installed: 0.9.0.1.2-r4
Homepage: http://www.iua.upf.es/~mdeboer/projects/alsamixergui/
Description: AlsaMixerGui - a FLTK based amixer Frontend
* media-sound/alsaplayer
Available versions: 0.99.76 0.99.76-r1 0.99.76-r2 0.99.76-r3
Installed: 0.99.76-r3
Homepage: http://www.alsaplayer.org/
Description: Media player primarily utilising ALSA
* media-sound/gnome-alsamixer
Available versions: 0.9.6
Installed: none
Homepage: http://www.paw.co.za/projects/gnome-alsamixer
Description: Gnome 2 based ALSA Mixer
* sci-electronics/balsa
Available versions: 3.4 3.4.3
Installed: none
Homepage: http://www.cs.manchester.ac.uk/apt/projects/tools/balsa/
Description: The Balsa asynchronous synthesis system
Found 19 matches
|
| Code: |
omerta ~ # cat /etc/modules.d/alsa
# Alsa 0.9.X kernel modules' configuration file.
# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.4 2004/11/16 01:31:22 eradicator Exp $
# ALSA portion
alias char-major-116 snd
# OSS/Free portion
#alias char-major-14 soundcore
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
alias snd-card-0 snd-via82xx
## alias snd-card-1 snd-ens1371
## OSS/Free portion
alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
#alias sound-service-0-0 snd-mixer-oss
#alias sound-service-0-1 snd-seq-oss
#alias sound-service-0-3 snd-pcm-oss
#alias sound-service-0-8 snd-seq-oss
#alias sound-service-0-12 snd-pcm-oss
## OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss
# Set this to the correct number of cards.
options snd cards_limit=1
|
| Code: |
omerta ~ # cat /etc/modules.conf
### This file is automatically generated by modules-update
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modules.d and read
# the manpage for modules-update(8).
#
### modules-update: start processing /etc/modules.d/aliases
# Aliases to tell insmod/modprobe which modules to use
# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off # Unix
# alias net-pf-2 off # IPv4
# alias net-pf-3 off # Amateur Radio AX.25
# alias net-pf-4 off # IPX
# alias net-pf-5 off # DDP / appletalk
# alias net-pf-6 off # Amateur Radio NET/ROM
# alias net-pf-9 off # X.25
# alias net-pf-10 off # IPv6
# alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off # Acorn Econet
alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81 bttv
alias char-major-108 ppp_generic
alias /dev/ppp ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0 loop_gen
alias loop-xfer-3 loop_fish2
alias loop-xfer-gen-10 loop_gen
alias cipher-2 des
alias cipher-3 fish2
alias cipher-4 blowfish
alias cipher-6 idea
alias cipher-7 serp6f
alias cipher-8 mars6
alias cipher-11 rc62
alias cipher-15 dfc2
alias cipher-16 rijndael
alias cipher-17 rc5
# Support for i2c and lm_sensors
alias char-major-89 i2c-dev
# Old nvidia support ...
alias char-major-195 NVdriver
alias /dev/nvidiactl char-major-195
### modules-update: end processing /etc/modules.d/aliases
### modules-update: start processing /etc/modules.d/alsa
# Alsa 0.9.X kernel modules' configuration file.
# $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.4 2004/11/16 01:31:22 eradicator Exp $
# ALSA portion
# OSS/Free portion
##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
## ALSA portion
## alias snd-card-0 snd-interwave
## alias snd-card-1 snd-ens1371
## OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##
# OSS/Free portion - card #1
## OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss
#alias /dev/mixer snd-mixer-oss
#alias /dev/dsp snd-pcm-oss
#alias /dev/midi snd-seq-oss
# Set this to the correct number of cards.
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.11 ---
alias snd-card-0 snd-via82xx
alias sound-slot-0 snd-via82xx
# --- END: Generated by ALSACONF, do not edit. ---
### modules-update: end processing /etc/modules.d/alsa
### modules-update: start processing /etc/modules.d/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
### modules-update: end processing /etc/modules.d/i386
|
| Code: |
omerta ~ # dmesg
Linux version 2.6.17-rc3-no2 (root@Conrad-LiveCD) (gcc version 4.1.1-pre20060513 (prerelease) (Gentoo 4.1.1_pre20060513, pie-8.7.8)) #1 SMP PREEMPT Sun May 14 14:11:50 CEST 2006
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
add_memory_region(0000000000000000, 000000000009fc00, 1)
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
add_memory_region(000000000009fc00, 0000000000000400, 2)
copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
add_memory_region(00000000000f0000, 0000000000010000, 2)
copy_e820_map() start: 0000000000100000 size: 000000002fef0000 end: 000000002fff0000 type: 1
copy_e820_map() type is E820_RAM
add_memory_region(0000000000100000, 000000002fef0000, 1)
copy_e820_map() start: 000000002fff0000 size: 0000000000008000 end: 000000002fff8000 type: 3
add_memory_region(000000002fff0000, 0000000000008000, 3)
copy_e820_map() start: 000000002fff8000 size: 0000000000008000 end: 0000000030000000 type: 4
add_memory_region(000000002fff8000, 0000000000008000, 4)
copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
add_memory_region(00000000fec00000, 0000000000001000, 2)
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
add_memory_region(00000000fee00000, 0000000000001000, 2)
copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
add_memory_region(00000000fff80000, 0000000000080000, 2)
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
767MB LOWMEM available.
On node 0 totalpages: 196592
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 192496 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa910
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x2fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x2fff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x2fff00c0
ACPI: DSDT (v001 VIA K7VT4 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
Detected 1499.715 MHz processor.
Built 1 zonelists
Kernel command line: root=/dev/hdb3
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0481000 soft=c0479000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 775052k/786368k available (2395k kernel code, 10816k reserved, 927k data, 192k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3001.32 BogoMIPS (lpj=1500662)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
CPU0: AMD Sempron(tm) 2200+ stepping 01
Total of 1 processors activated (3001.32 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1
Setting up standard PCI resources
ACPI: Subsystem revision 20060310
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by vt8235 PM
PCI quirk: region 0400-040f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: dfe00000-dfefffff
PREFETCH window: bfd00000-dfcfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
Loading Reiser4. See www.namesys.com for a description of Reiser4.
NTFS driver 2.1.27 [Flags: R/W].
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
lp: driver loaded but no devices found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
vesafb: ATI Technologies Inc., V280, 01.00 (OEM: ATI RADEON 9200)
vesafb: VBE version: 2.0
vesafb: no monitor limits have been set
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 128x48
vesafb: framebuffer at 0xd0000000, mapped to 0xf0880000, using 10240k, total 16384k
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI (acpi_bus-0200): Device 'ILAN' is not power manageable [20060310]
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 16
eth0: VIA Rhine II at 0x1dc00, 00:0b:6a:67:3e:c4, IRQ 16.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 40a1.
PPP generic driver version 2.4.2
Linux video capture interface: v1.00
saa7130/34: v4l2 driver version 0.2.14 loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI (acpi_bus-0200): Device 'IDE0' is not power manageable [20060310]
ACPI Warning (pci_irq-0383): Unable to derive IRQ for device 0000:00:11.1 [20060310]
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6H500R0, ATA DISK drive
hdb: IC35L060AVV207-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-4550A, ATAPI CD/DVD-ROM drive
hdd: CR-48XATE, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 976773168 sectors (500107 MB) w/16384KiB Cache, CHS=60801/255/63, UDMA(133)
hda: cache flushes supported
hda: hda1
hdb: max request size: 512KiB
hdb: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2 hdb3
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 16384kB Cache, UDMA(33)
ACPI (acpi_bus-0200): Device 'EHCI' is not power manageable [20060310]
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 17
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 17, io mem 0xdfffff00
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.17-rc3-no2 ehci_hcd
usb usb1: SerialNumber: 0000:00:10.3
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI (acpi_bus-0200): Device 'USB1' is not power manageable [20060310]
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e400
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.17-rc3-no2 uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI (acpi_bus-0200): Device 'USB2' is not power manageable [20060310]
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e800
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.17-rc3-no2 uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI (acpi_bus-0200): Device 'USB3' is not power manageable [20060310]
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 17, io base 0x0000ec00
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.17-rc3-no2 uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
ip_conntrack version 2.4 (6143 buckets, 49144 max) - 172 bytes per conntrack
input: AT Translated Set 2 keyboard as /class/input/input0
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
input: PS2++ Logitech Wheel Mouse as /class/input/input1
VFS: Mounted root (reiser4 filesystem) readonly.
Freeing unused kernel memory: 192k freed
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
ACPI (acpi_bus-0200): Device 'AC9' is not power manageable [20060310]
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:11.5 to 64
Adding 722916k swap on /dev/hdb2. Priority:-1 extents:1 across:722916k
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 680 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[fglrx] module loaded - fglrx 8.24.8 [Apr 11 2006] on minor 0
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, half-duplex, lpa 0x40A1
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:11.5 to 64
|
| Code: |
omerta ~ # emerge --info
Portage 2.1_rc1-r4 (default-linux/x86/2006.0, gcc-4.1.1-pre20060521, glibc-2.4.90.20060511-r0, 2.6.17-rc3-no2 i686)
=================================================================
System uname: 2.6.17-rc3-no2 i686 AMD Sempron(tm) 2200+
Gentoo Base System version 1.12.0_pre19
dev-lang/python: 2.4.3-r1
dev-python/pycrypto: 2.0.1-r5
dev-util/ccache: [Not Present]
dev-util/confcache: [Not Present]
sys-apps/sandbox: 1.2.18.1
sys-devel/autoconf: 2.13, 2.59-r7
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2
sys-devel/binutils: 2.16.93
sys-devel/libtool: 1.5.22
virtual/os-headers: 2.6.16
ACCEPT_KEYWORDS="x86 ~x86"
AUTOCLEAN="yes"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=athlon-xp -fomit-frame-pointer -pipe -ftracer -fweb -frename-registers"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/kde/3/share/config /usr/share/X11/xkb /usr/share/config /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/eselect/compiler /etc/gconf /etc/revdep-rebuild /etc/splash /etc/terminfo /etc/env.d"
CXXFLAGS="-O2 -march=athlon-xp -fomit-frame-pointer -pipe -ftracer -fweb -frename-registers -fvisibility-inlines-hidden"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoconfig distlocks metadata-transfer sandbox sfperms strict"
GENTOO_MIRRORS="http://distfiles.gentoo.org http://distro.ibiblio.org/pub/linux/distributions/gentoo"
LDFLAGS="-Wl,-O1 -Wl,--sort-common"
LINGUAS="en fr de es it tr"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude='/distfiles' --exclude='/local' --exclude='/packages'"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
SYNC="rsync://rsync.gentoo.org/gentoo-portage"
USE="x86 3dnow 3dnowext X aim alsa apache2 apic apm arts asf ati avi berkdb bidi bitmap-fonts browserplugin cli cmov crypt cups cx8 de dri eds emboss encode esd foomaticdb fortran fpu fxsr gdbm gif glibc-omitfp gnome gpm gstreamer gtk gtk2 icq imlib ipv6 irc isdnlog jabber java javascript jpeg kde libg++ libwww lj mad matroska mca mce mikmod mmx mmxext mono motif mozilla mp mp3 mpeg mpg msn msr mtrr ncurses nls nptl nptlonly nsplugin ogg opengl pae pam pat pcre pdflib perl pge png pppd pse pse36 python qt quicktime readline real reflection rss sdl sep session spell spl sse ssl syscall tcpd tiff truetype truetype-fonts ts tsc type1-fonts udev unicode up vme vorbis win32codecs xinerama xml xmms xorg xv xvid yahoo zlib elibc_glibc kernel_linux linguas_en linguas_fr linguas_de linguas_es linguas_it linguas_tr userland_GNU"
Unset: ASFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, MAKEOPTS, PORTAGE_RSYNC_EXTRA_OPTS
|
_________________
--eof--
Last edited by __g_blade on Tue Jun 06, 2006 2:29 pm; edited 2 times in total |
|
| Back to top |
|
 |
Keepoer
Apprentice
Joined: 30 Mar 2004
Posts: 293
Location: Zwischen Kassel und Edewecht pendelnd
|
| Posted: Fri May 26, 2006 5:41 pm Post subject: |
|
|
Schon mal probiert, ALSA im Kernel einzubauen?
MfG
Keep |
|
| Back to top |
|
|
flammenflitzer
Advocate
Joined: 25 Nov 2003
Posts: 3538
Location: Berlin
|
| Posted: Sun May 28, 2006 12:19 pm Post subject: |
|
|
| Was wird denn in der Konsole ausgegeben, wenn alsaconf crasht? |
|
| Back to top |
|
|
Ezekeel
Apprentice
Joined: 10 Apr 2004
Posts: 285
Location: SW Germany
|
| Posted: Sun May 28, 2006 5:16 pm Post subject: |
|
|
schonmal versucht mit hilfe von alsamixer pcm zimelich weit runterzudrehen?! Hat bei mir immer geholfen wenn der Sound sich komisch angehört hat?!
_________________
Das logische Denken ist das Muster einer vollständigen Fiktion. |
|
| Back to top |
|
|
__g_blade
Tux's lil' helper
Joined: 13 Jan 2006
Posts: 101
Location: paderborn, germany
|
| Posted: Tue Jun 06, 2006 11:09 am Post subject: |
|
|
pcm runtergedreht brachte keine besserung
und der dialog von alsaconf crasht sofot nach start (dialog für ne millisekunde sichtbar) ohne irgendeine meldung.. da ist wohl ein 'clear' drin irgendwo
habe jetzt seit wochen keinen sound bitte um schnelle hilfe
_________________
--eof-- |
|
| Back to top |
|
|
STiGMaTa_ch
Veteran
Joined: 28 Dec 2004
Posts: 1686
Location: Rüti ZH / Schweiz
|
| Posted: Tue Jun 06, 2006 1:36 pm Post subject: Re: ! ALSA Probleme |
|
|
| __g_blade wrote: | | ALSA sound ist total verzerrt.. In Musik und Videos höre ich Instrumental in voller Lautstärke die Stimmen aber sind total runter klingen hallend und problematisch halt. |
Das Phänomen hatte ich mal unter Windows. Bei mir lag es nicht an der Software sondern an der Hardware. Der eingelötete Chinc (oder was das auch immer für welche sind) Stecker auf der Soundkarte hatte nen Wackelkontakt. Je nachdem wieviel Zug das Verbindungskabel Soundkarte/Stereoanlage hatte, hatte ich das selbe Phaenomen.
Versuch mal das Kabel auszutauschen oder während dem Betrieb ein wenig drann rumzurütteln. Wenn es plötzlich besser wird liegts am Kabel oder am Anschluss der Soundkarte. Wenns die Soundkarte ist wirst du wohl was neues kaufen müssen... 
Lieber Gruss
STiGMaTa
_________________
Ich bin Schuldknappe. Das bedeutet ich bin immer an allem Schuld. Und das nicht zu knapp! | Der alltägliche Familienwahnsinn auf meinem BLOG |
|
| Back to top |
|
|
__g_blade
Tux's lil' helper
Joined: 13 Jan 2006
Posts: 101
Location: paderborn, germany
|
| Posted: Tue Jun 06, 2006 2:29 pm Post subject: |
|
|
blöde billigkabel
problem gelöst, ein teil des kabels hatte sich in seine bestandteile aufgelöst
danke
_________________
--eof-- |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Deutsches Forum (German)
